Power Transformer

Ensign - P020-2-016X Transformer, Power.

Captain Class - Center-tapped  

Power: 20VA.

Pri/Sec: 120/240

Secondary: Dual 8V 2.5A or single 16V @ 1.25A.

Construction: Low Profile semi-toroidal hum-bucking.

Mounting: PCB.

Dimensions: 35mm above board x 48mm x 57mm.

 

 

Learn More

SIGNAL TRANSFORMER INC - DP-241-6-28 - Transformer, Power. 115/230V Primary, 28VCT Secondary

Signal's 241 transformers use a split bobbin construction that provides superior isolation and low capacitive coupling.

Diellectric Stregth: 2500 Vrms Hipot

Insulation: Class C 130C UL 11446

Dual 115/230 Volt 50/60 HzPrimary 28  VCT Secondary

Brand: Signal Transformer Inc

Type: DP-241-6-28

Secondary: 28 VCT @2.0A

Max Power: 56 Watts

Dimensions: Height 49.8 mm X Length 82.6 mm X Width 44.3 mm

New in OEM bulk packaging.

UL recognized to UL 506 / UL 5085-1, File # E63829

CSA certified to C22.2 #66.1, File # 221070

Pb Free.

Made in USA.

Learn More

SIGNAL TRANSFORMER DP-241-7-24

115/230 VOLTS PRIMARY 24 VOLTS SECONDARY

Brand: Signal Transformer Inc

Type: DP-241-7-24

Primary: 115/230 Volts

Secondary: 24 Volts

Max. Current: 2.4 Amps

Max Power: 56 Watts

Dimensions: Height 57-2mm X Length 93.7 mm X Width 49.2mm

New in OEM bulk packaging.

UL recognized to UL 506 / UL 5085-1, File # E63829

CSA certified to C22.2 #66.1, File # 221070

Pb Free. Made in USA.

Learn More

Triad/Magnetek - F-41X Transformer.

The F-41X is part of a series which has a long history of reliable service in the field, made from a proven design and constructed with UL recognized materials.

Filament and Low Voltage Transformer

25.2VCT@ 2Amp. 

Maximum Power  50.4 VA

Voltage Regulation  10% Typical 2 Full Load to No Load

Filament Transformer red-red/yel-red.

115VAC Primary Black Leads.

Mount: Chassis Mount

Dimensions: 2.593" x 4.00" x 2.250" high with 2 hole mounting flange 3.56"spacing.

Hipot of 1500V between primary and secondary windings and core 

Weight: 2.2 lbs.

Compliance: RoHS, UL

Alternate: Triad F-148XP, Stancor P-8388P, Hammond 266LA25, 6K96HF

Note: 15 Transformers per Factory Packaged Box.

Learn More

Signal Transformers - DPC-120-200 Transformer, Isolation/Step-down.

Power: 24VA. Pri/Sec: Dual: 115 / 230VAC Pri to Dual 60VAC 0.4Amp.

Secondary: Output in Series = 120VCT at 200mA Output in Parallel = 60V at 400mA.

Construction: Miniature printed circuit board mount. Laminated Core

Dimensions: 1.6"L X 2.25"W X 1.38"H. (41.3mm x 57.2mm x 34.93mm)

Weight: 12-oz each.

Volatege Isolation: 1500Vrms

8-pin-Series, designed to operate from 50Hz through 500Hz,

Insulation Class B 130degC UL-1466 E66312 UL-506 and CSA certified to C22.2 #66

Also useful as 24 Watt Isolation Transformer 120VCT.

RoHS3 Compliant

Learn More

Signal Transformers - 241-4-1775 Power Transformer. 

Primary: 115 VAC

Secondary 15VAC at 400mA.

Split-bobbin, High isolation. Low capacitive coupling.

Dimensions: 2.37" long x 1.25" wide x 1.37" high.

Mounting holes are 2" apart.

Primary: 5" wire leads.

Sec: 8" wire leads to 3-pin molex plug.

Weight: 7 oz.

Learn More

PREM Magnetics - SPW613D Transformer, Power. 20VA

20VA, Dual 115/230V.

Parallel: 10V@2Amp. Series: 20VCT@1Amp.

Mount: PCB 8 Pin.

Agency certifications: UL 506/5085-2 (File E96326), CSA-C22.2 No. 66.1-06 & No. 66.2-06 (File 063944)

Dielectric strength: 2500Vrms primary to secondary

Insulation system: Class B (130°C), UL 1446 (File E85315)

100% final tested: Every transformer is tested on automated panels for exciting current, open circuit voltage (turns ratio), polarity (phasing), and dielectric strength

Dual primaries & dual secondaries: Must be series or parallel connected

Three flange bobbin design; no electrostatic shield required

Immersed in 100% solids epoxy resin to withstand most aqueous and solvent cleaning systems

Genuine Prem Magnetics - New Old Stock

More info: https://www.premmagnetics.com/spw-613-d-dual-115-230v-primary-20-0va-series-20vct-1-0a-parallel-10v-2-0a/

Learn More

Radio Transformer Factory New Military Fully enclosed NSN 5950-005019442, (LOCKHEED MARTIN 6096978-1)Double marked W8885 Learn More

Military Enclosed TransformerNo other spec's avail. Marked Lockheed Martin 6096979-1 andElectro Networks W8860 Learn More

Military Enclosed TransformerNo other spec's avail. Marked Lockheed Martin 6096977-1 andElectro Networks W8860 Learn More

Military Transformer Input 440V, 9-LeadsLockheed Martin 6096882-1, Overall 1.074" dia round x 0.5" high, PCB Mountable Learn More

EIA 831 - Better Transformer and Coil Corp - 2816285-1 Transformer, Step Down.

Heavy Duty Chassis Mount

Power: 25 VA 

Primary - 120VAC, Dual Secondary 11VAC -22VAC.

Secondary: 1A  Each winding.

Turns Ratio: 12:1 and 6:1.

Construction: E-laminations.

Connections: Wire Leads.

Package: Open Laminations.

Mounting: Brackets.

Two Separate Secondaries, 11V and 22V.

Additional P/N Markings: DN-9195-PT4, 156309, 4938407

Dimensions: Approximate Length 3.110" X 1.75" Width X 2.65" Height w/5" Leads

Weight: 1.8 lbs 

New Old Stock

Made in USA

Learn More

Triad Magnetics - ET-001A - 1MH Toroid / Toroidal Choke, ET Series

Triad sub-miniature inductors are toroidally wound on permalloy powdered cores. Encapsulated in high temperature epoxy resin. Weldable or solderable leads of gold plated nickel alloy. Highly resistant to severe acceleration, shock or
vibration. Manufactured to meet the requirements of MIL-T-27B, Grade 5 Class S (MIL type TF5SX20ZZ).

Triad-Utrad Distributor - Division of Litton Precision Products

Status: Discontinued Commercial & Military Grade

Triad Magnetics was Triad Electronics

Epoxy Molded Toroidal Construnction

Inductance: 1 MH 

Resistance Average: 0.57 Ohms

DC ma for 5% Ind. Drop: 680

Package: Round 2 Pins.

Connections: 2 Solder Terminals

Dimensions: 1.320" Diameter X 0.715" Height X Inner Diameter 0.140 (33.57mm X 18.16mm X 3.57mm)

Weight: 2 Oz

Made in USA

Genuine Vintage Triad Toroid

 

 

 

Learn More

Westinghouse - S48D11S15N - 15KVA 1PH 480V (tapped) to 120/240 Enclosed 15KVA Transforrmer PRI. 480V SEC. 120/240VAC 60 cycle SINGLE PHASE. Enclosure type 3R - pri. taps 456, 468, 480, 492 & 504. General purpose encapsulated transformer Indorr/Outdoor Frame: 180 115 Degree Temperature Rise2 180 Insulation System Weighs about 215# Dimensions Approx. 16" X 13" X 10.5" Good Condiction. Learn More

Better Coil and Transformers Company - 55-86912-1 - 605P3

Transformer. 15V 7.5VCT 2A, and 5 VAC @2 .

Input: 115 VAC Black – Black / White
Output: 16 VAC (Red – Red), 8 VCT( Red/Yellow - Red), 5 VAC (Blue x 2)

Dimensions: 2.6" x 2.5" x 2.25" high.

Open Frame.

Dipped in Moisture Resistant Varnish.

Weight: 2 LBS. 

EIA Code 831-8431. 

Unloaded Secondary Voltage is 18.1 VAC and 5.6VAC.

EIA (Electronics Industries Assocciation) code 831 identifies manufactuere "Better Coil and Transformers Company" 

Learn More

Texas Instruments - AC9500 - 18V 1.35A Transformers, Dual.

AC output 18VAC at 1.35Amp and 8.5VAC at 150mA.

ICC-2-1500-1-CL2.

Complete with a 4 foot, 2-conductor power cable.

Output cable approx 7.5' with a 4-pin connector.

Mount: Desk top.

Listed: UL/CSA.

New Old Stock

Learn More

Stancor - RT-202 - Transformer.

Tapped Outputs: 11.1VDC 4Amp, through practically any voltage up to 33VDC 2Amp.

Center Tapped/Bridge: 12.0 to 29.8

Mount: Panel.

Dimensions: 3-7/16" x 2-13/16" x 2-3/4".

Weight: 3.8 lbs.

Used/Removed from equipment.

Excellent condition.

More info: http://www.stancor.com/pdfs/Catalog_2006/Pg_006_7.pdf

Learn More

HYDE - 900-03-350 Transformer. BTC 11906

Dual primary: 105/210V.

Secondary: 9.5VAC 1.75Amp and 24VAC 1.75Amp.

Open Frame

Commerical Duty

Unshielded with Terminal Boards

Transformer 110.

Learn More

HOBART TRANSFORMERS - PD-6805A Transformer,

Ideal for dual DC power supplied, controls and instrumentation

Two Primaries: each rated at 115VAC and 50/60 Hz

Two Secondaries, each rated 34VCT @ 0.5A

Series and Parallel connections of the paired windings allow for 115 or 230 VAC input and 34VCT @ 1A or 68VCT @ 0.5A.Primaries are numbered 1-2 and 3-4;

Secondaries are numbered 5-6-7 and 8-9-10. Winding polarities run in ascending numerical winding order.

Connect 2-3 to input 230VAC between 1 and 4 or 1-3 and 2-4 to input 115VAC.

Likewise, connect 7-8 to output 68VCT between 5 and 10. and 5-8, 6-9 and 7-10 to output 34VCT.

Dimensions: 3 1/8" X 3 1/4" x 2 3/4"

UL Recongnition - UL-1446

Weight 1.7 lbs.

Learn More

DALE - IPL-2329-11 Transformer.

Dual 60V 200mA.

Useful as an isolation transformer at 24 watt.

Mount: PCB 8 Pin.

Learn More

Sola HD 23-22-112-2 120VA CVS Voltage Regulator.

Transformer, constant voltage. 120/240 VAC Primary: 95-130V x 190-260V 60 Cycle. Secondary: 120V 60 Cycle. 1Phase 120VA. Packed weight approximately 16 lbs. Height 8" (203.2mm), Width 4" (101.6mm), Depth 5" (127mm). 

Features
• Superior voltage regulation of ±1%
• Surge protection tested to ANSI/IEEE C62.41, Class A & B Waveform
• Harmonic filtering
• Hardwired
• Acts as a Step-up/Step-down Transformer
• Galvanic isolation provides exceptional circuit protection.
• 25 year typical Mean Time Between Failure
• No maintenance required

Applications
• Industrial automation and control equipment PLCs
• Analytical laboratory and factory automating equipment
• Photo processing equipment
• Sound/recording systems
• Photographic enlargers
• Broadcast equipment Related Products
• On-line UPS (S4K Industrial)
• Surge Protection
• Three Phase Power Conditioners
• Active Tracking® Filters

Note: Used / Removed From Equipment - With 120 VAC Power Input and Output Cords attached.

Learn More

Reliance Electric - TR9962 - Reliance 64977-52R - Transformer.

 9-wire.

Learn More

Transformers, power. 5V at 1Amp. Marked 3527348. One side of the 5V secondary is soldered to frame externally, removable. Dimensions: 1.8" x 1.2" x1.4" high with 3 wires. Weight: 4oz. Learn More

Triad/Utrad - F142XP - Power Transformer, 4.5 KVA

Pri: 115V 50/60Hz

Manufacturer: Triad Magnetics< Series F              

Product Category: Power Transformers 

Primary Voltage Rating: 115 VAC   50/60 Hz           

Secondary Voltage Rating: 15 V 

Power Rating: 4.5 VA     

Mounting Style: Through Hole    

Dimensions: Length: 1.7 in, Width: 2.38 in, Height: 1.44 in            

Operating Temperature: 0 C to 130 C

Termination Style: Solder Pin     

Unit Weight: 7.499999 oz

Open Frame mounts on 2" centers (two holes 2" apart) New PC mount

New Old Stock

Learn More