PC Mount Transformer

Unknown function. Maybe a pulse transformer? Package: 14 Dip. Note: Marked 9438-1104 Rev B. Learn More

Transformer. Unknown voltage and current. Mount: PCB, 8 Pin. Dimensions: 19.9mm long x 22.8mm wide (max) x approximately 16.0mm above board. Pin spacing: approximately 3.5mm x 13.0mm. New. Learn More

Unidentified MFG - B24-445 Transformer, Shielded.

Military. Mount:

Panel, 2 holes at approximately 1.030" centers.

Seven wires, from only two exits on rear.

Dimensions: 1.519" D x 1.92" high, plus connection.

Note: Double marked 294272.

Learn More

Transformer. 2x115vac 50/60Hz T40/A. 2x6.3V, 2x10VA. Open frame. Mount: PCB 8 leads. Learn More

Transformer. Mount: PCB. Package: 7 pin. Dimensions: 25.7mm D round x 25.0mm high. Note: Alt P/N: 23621. Each with S/N. Cage No. 72964. Learn More

Transformer, power. 6VA. Dual 115/230V. Par: 17V 340mA. Series: 34VCT 170mA. Mount: PCB. More info: http://premmagnetics.com/Products/Drawings/SPW-100 Learn More

Pulse Engineering - PE68515L - Transformer, audio.

Isolation voltage: 1.5kV.

Frequency range: 1MHz to 100MHz.

Dimensions: 25.4mm long x 13mm wide x 9.91mm high.

Package: 14 SMD Gull Wing

Learn More

Transformer. Off line switch mode. Mount: PCB. Package: 10 Pin. Learn More

EMI / RFI Line Filter 0.5Amp - 57VA 115V or 115VA 230VAC - 22mHy - 1.2-Ohms each winding - PC mount - Cx= 0.1uF Line-to-line, Cy= 2200pF Line-to-FG Learn More

SIGNAL TRANSFORMER INC - 10-BR - Transformer, Hardware Bracket.

Mounting Bracket CRS Galvanized Steel used in conjunction with a variety of our Power Transformers

Dimensions: 1.64" x 1.12".

applications: use with  Signal's 24VA size PC, DP, MPC andDMPC series transformers.

New.

Learn More

8600B01P-1 Transformer.

For a Switching Power Supply.

Case: Shielded.

Mount: PCB 8 Pin.

Dimensions: 1.086" D x 0.824" above board.

 

Learn More

Renco Electronics - RL-9466

Transformer, current.

Mount: PCB 10 Pin.

Dimensions: 0.732" long x 0.650" wide x 0.583" high. 

Learn More

SIGNAL TRANSFORMER INC - 12-1010A-LPI

Signal’s LPI series are transformer which utilize unique insulating techniques including full encapsulation to meet international safety requirements. These transformers are ideal for low power applications where minimum height and reduced magnetic radiation are required.

"Flathead" - Low Profile International Transformers

Primary: Universal Semi-Torodial 115/230V 50/60 Hz

LPI Series Direct Plug-in Replacment for the Original flathead Desgn

Secondary: Dual 200V @ 0.018AMP and 15.94V @ 18mAmps

Encapsulated in order to meet harsh environmental conditions

Rigid pin construction for easier board insertion and higher reliability

Mounting holes provided for greater resistance to shock & vibration

Improved electrical characteristics - regulation, temperature rise and efficiency.

Reduced magnetic radiation

Voltage Isolation: 4000Vrms

Dimensions: 55mm x 67mm x 27mm Universal 

Weight: Approximately 12 Ounces

PCB Mt Transformers

Connections: 8-pin

Molded Frame/Enclosed

Factory New

Approvals: UL, CSA

Made in USA

Learn More

500-Ohm pri 200-Ohm sec primary dc resist 36-Ohm2nd 14.4-Ohm Turns radio 1.61:1 Core must have grounded mounting strapPri ind by red dot less than one inch pcb mt Blue Learn More

VITEC - 12Z4906 - Transformer, Control. Pulse.

Designed specifically for industrial control and general purpose applications.

Epoxy encapsulated in a small pre-molded case gives superior humidity resistance.

Provides low-noise operation of high power SCR resonant inverters.

Meets design requirements of most Sine wave inverter circuits

Operating temperature: -40 C to +125C

Peak working voltage:175 Volts per MIL-T-21038

Dissipation rating: 0.3 Watts at +25C

Ratio 1:1

Mount: PCB.

Package: 4 Pin Molded case.

More info: www.viteccorp.com/data/c104.pdf

Learn More

Wabash - 5161 Transformer, PCB.

Input 120V.

Output 28V 100mA, 14V 50mA.

Mount: PCB.

Package: 5 Pin.

Dimensions: 1.5" long x 1.14" wide x 1.209" high

Listed: UL/CSA.

Learn More

Transformer? Mount: PCB. Package: 6 radial leads. Dimensions: 0.399" long x 0.306" wide x 0.480" high. Note: Double marked 6 2PT30545. Learn More

Transformer. Coil / Inductor. Primary: 12V IGN. Pak transformer/form. Dimensions: 1.091" D round x 1.427" tall, 10 leads plus a ground wire. Note: No other information available. Very old stock. Learn More