Toggle Switch

C & K Components - T203SY9V3GE Switch, toggle.

T-Series Subminiature Toggle Switch

Contacts: DPDT Center-off.

Contact Ratings: 2A 125VAC/28VDC or 0.4VA low level / dry circuit,

Contact Material: Gold over Silver Contacts.

Actuator: On-Off-On.

Connection: Gold over tinned PC pins, Epoxy sealed.

mount: Vertical Mount, V-Bracket

Mech: PCB, bushing is not threaded.

Body: 0.358" x 0.40" x 1.0" above pc board.

Made in USA

 

Learn More

HONEYWELL MICRO SWITCH - 11TS1-21 Switch, Toggle, SPST.

MICRO SWITCH TS Series toggles may be used anywhere manual operation is desired. They are an entry-level solution for applications that do not require a sealed toggle switch.

Hermetic and environmentally sealed toggle switches offer enhanced reliability with MICRO SWITCH™ technology. Can be used in a variety of applications where a panel-mount switch with an environment-proof rating is needed, including industrial equipment, military and commercial aviation, agriculture, process control, and medical.

Type: Stainless Steel. Phenolic Toggle

Contacts: SPST, 2 Position Maintained, Silver Cadmium Oxide

Contact Ratings: 15Amp 125, 250, 277VAC (1/2HP 125V, 1HP 250, 277V, 5A 125VAC).

Actuator: Off-On. Maintain/Maintain

Connection: Screw Terminals.

Mech: Panel, Bushing. Lever-to-Bushing Seal

Body: 1.131" (28.7mm) Long x 0.638" (16.2mm) Wide x 0.694" (17.6mm) High.

Threaded Bushing: 1/2" D x 12.3mm long.

Actuator: 17.2mm Long.

Operating Temp.: -54C to 71C (-65F to 160F)

Complete with Hardware.

Listed: UL, CSA, CE

Made in USA

NSN: 5930-00-655-1514

Alternates: 00-00370-08, 0232-5, 09N051N, 11TS1-1, 12521, 144422, 146-007-0001  , 16-02262, 1942198-3, 1942198-3, 21C1596-41, 270-900011-001, 270-900011-011, 3200708-1, 320AS116-8, 34861033, 35058EM, 400004-16, 4101, 4101JT, 411036-21, 511TS1-7, 51590, 567584, 59027-105, 689-209, 7002B53, 7502K12, 7502K13, 7581K4, 7581K5, 7581K6, 7581K7, 7768942PTS, 7800-0042-001, 812031-0021, 82602, 82650, 83004, 86202, 8800K13, 8800K13, 8800K13, 8800K16, 8800K7, 8802K10, 8802K6, 90-333, 9N51N, AN3021-1, CH8800K16, CH8802K10, D72205WG, F611, INR122-123, JAMST42E, L42E, MIL-DTL-83731, MIL-S-83731, MS35058, MS35058-1, MS35058-16, MS35058-21, Q70994-20, RS62, S382-1, SA13, ST40E, ST42E

Learn More

TS-81 – Miniature Toggle Switch, SPDT, Right Angle. Contacts: SPDT. Contact Ratings: 5Amp 125VAC, 2Amp 250VAC. Actuator: On-Off-On. Plain bushing for easy Panel Removal Connection: PC Leads, Through Hole Solder. Mechanical: PCB Right Angle. Temperature: -30 C to 85 C Material: Glass Filled Nylon 66 Heat Stabilized Body: 12.8mm long x 6.9mm wide x 9.3mm high. Note: Miniature. Dimensions: Bushing: 7.3mm Long. Actuator: 10.8mm Long. Applications: Industrial New Learn More

UNITED SWITCH CORP - MTS-102-C3 Switch, Toggle.

The MTS Series miniature toggle switches offer numerous actuator options and termination options including right angle PC mount. These toggle switches offer up to 4 poles. They are PCB mounted and are available in through whole or right angle termination.

Contacts: SPDT.

Contact Ratings: 6Amp 125VAC/3Amp 250VAC.

Actuator Switch Method: On/On.

Connection: 3 PCB Right Angle Terminals.

Mechanical Mount: PCB.

Short Handle

Epoxy Sealed - Black

Miniature Lever.

Dimensions: Switch Body 0.500" Wide, 0.785" Lone (Minus Toggle), 0.270" Height (12.70mmX19mmx6.86mm) 

Life:>100,000 Cycles

Applications include Telecommunications, Instrumentation, Networking and Medical Equipment. Several families of MTS toggle switches are available, and many people used them in guitar effector.

 

Learn More

MARQUARDT GMbH - 1821 1101 Switch, Toggle with 343.001.023 Weatherproof Boot.

Marquardt 1820 series toggle switches are suitable for use in Class II appliances. A black Neoprene® lever cover which simply screws onto the toggle switch M12x0.75mm bush is available to protect the actuator from dust and water ingression.

Contacts: SPST ON/OFF.

Contact Ratings: 6Amp 125/250VAC.

Connection: Two 3/16" Male Quick Connect Terminals, or maybe soldered.

Mech: Panel, Snap-in.

Body: ThermoPlastic Glass Fiber Reinforced

Color: Black.

Overall 0.943" Long x 0.648" wide.

Behind Panel 0.808" Long x 0.476" wide.

Note: With Weatherproof Neoprene® Boot.

Threaded Bushing Length: 0.308".

Operating Temperature: -20 C to 55 C

Life Cycles: 50,000

Actuator Length: 0.542".

Rohs Compliant

Alternate: Mouser  979-1934-3114 Switch 

MARQUARDT GMbH - 1821 1101 Switch, Toggle with 343.001.023 Weatherproof Boot.

Marquardt 1820 series toggle switches are suitable for use in Class II appliances. A black Neoprene® lever cover which simply screws onto the toggle switch M12x0.75mm bush is available to protect the actuator from dust and water ingression.

Contacts: SPST ON/OFF.

Contact Ratings: 6Amp 125/250VAC.

Connection: Two 3/16" Male Quick Connect Terminals, or maybe soldered.

Mech: Panel, Snap-in.

Body: ThermoPlastic Glass Fiber Reinforced

Color: Black.

Overall 0.943" Long x 0.648" wide.

Behind Panel 0.808" Long x 0.476" wide.

Note: With Weatherproof Neoprene® Boot.

Threaded Bushing Length: 0.308".

Operating Temperature: -20 C to 55 C

Life Cycles: 50,000

Actuator Length: 0.542".

Rohs Compliant

Alternate: Mouser  979-1934-3114 Switch 343.001.023 Boot

Approvals: UL; CSA; ENEC

Made in Germany

Approvals: UL; CSA; ENEC

Made in Germany

Learn More

Honeywell/Micro Switch - 104TL226-5 Switch, Toggle.

4PDT (Mom) On/None/Off.

125VAC 7.5Amp/250VAC 6Amp.

Resistive DC: 125V 0.75Amp/250V 0.5Amp/28VDC 7.5Amp.

Inductive load: 125VAC 7.5Amp/28VDC 7.5Amp.

Termination IWTS (16-20AWG) MIL-S-3950.

Threaded bushing length: 0.432".

Actuator length: 0.643".

Operating temperature: -85 to 160 Deg F.

Terminals accept pins M39029/1-101, not included.

Note: Military. Environmentally sealed shaft.

Learn More

Honeywell - Micro Switch - 104TL1-72 -Switch, Toggle / Rocker

Contacts: 4PDT.

Contact Ratings: 0.75 A at 115 Vdc,0.5 A at 250 Vdc,0.5 A to 20 A at 0.5 Vdc to 28 Vdc,0.5 A to 15 A at 0.5 Vac to 277 Vac.

Actuator: (On) On (On) = (Mom) On (Mom).

Mech: Bushing 15/32 in.

Operating temperature: -85degF to +160degF.

Note: Environmentally sealed switch, completely sealed switching chamber, high strength, temperature resistant, non-tracking case, material and silver cadmium oxide contacts.

Military qualified MS27724-3.

Contacts: IWTS (14-16AWG) termination.

Double listed as MS27724-3 SKU 133204

Learn More

SAFRAN - EATON - CUTLER-HAMMER AEROSPACE - 8906K5354 Switch, Toggle.

Contacts: DPDT 15Amp 125VAC.

Actuator: On/Off/On (Mom).

Threaded Bushing Length: 0.418".

Actuator Length: 0.690".

Dimensions: 1.34" long x 0.896" wide x 1.002" deep.

Termination: (6) 1/4: Male Quick Connect Terminals.

Note: Environmentally Sealed Shaft.

Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 2Amp 115VAC 60Hz (Res load), 4Amp 28VDC (Res load), 1Amp 115VAC 60Hz (Inductive load), 1Amp 28VDC (Inductive load). Actuator: On-On. Connection: PC Leads, tarnished, cleanable. Mech: PCB. Note: Military double marked MS21354-231. Military NSN 5930-010433006. New, complete with hardware. Learn More

Industrial Cutler-Hammer / Eaton - 8130K20J15V51, DPDT On/Off/On, Center-Off, Motor Reversing Toggle Switch (Already Cross Strapped) Permits usage for Polarity Reversing Motor. Alternate 8951159

White Rocker Identified FWD & REV, 6A-125VAC, 3Amp 250VAC, 2A-277VAC

Six (6) 1/4" Quick Connect Male Tabs, Dimension: 1.45" wide x 1.33" x 1.16"

Panel Mount Fits standard .83 x 1.48 Inch Rectangular opening. Switch secured by included snap-on bezel. 

Very handy item to have around the shop if you are DYI type. Used for all sorts of DC motor reversing applications such as camper trailer jacks, winch controls for in/out operation, door open closed, liftgate up/down, boat navigation and anchor or Automotive Motor Control.

This switch can be used when you want to feed (2) loads from 1 or 2 sources. This switch may also be used as a SPDT switch by simply not using 3 of the terminals.

Made with Pride in USA

 

 

 

Learn More

CP CLARE - 5930-538-3614 - B81622 - Switch, Lever.

Contacts: SPST.

Contact Ratings: 1A precious metal contacts.

Actuator: center-on, circuit closed.

Connection: solder terminals.

Mech: 0.95" x 2.25" black plate, 2 holes 1.95" spacing.

Panel hole: extends 3" behind panel.

Weight: 0.5 lb.

Alt P/N B81622

Learn More

Carlingswitch - 2GK53-NBL - Model 3XSC1 Switch, Toggle with Paddle.

G Series Toggle Switches Contains a slow-make, slow-break contact mechanism.

Contacts: DPST. Double Pole,  On-None-Off

Contact Ratings: 15Amp 125VAC, 10AMP 250VAC, 1/2 HP 125-250 VAC

Actuator: Nylon Bat Handle. Toggle Length - .687", Bushing Length - .465" 

Use .250" Tab Terminations

Note: With Hardware.

Alternates: 2GK51-NBL3, 35-3150, AML33FBA4AC01

New Old Stock

Learn More

Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 6Amp 125VAC, 3Amp 250VAC (1/4HP 125-250VAC).

Actuator: Onn-Off (Mom).

Dielectric Strength: 1,000 V RMS (minimum)

Insulation Resistance: 100 megohms (minimum)

Base Material: Phenolic

Actuator Style: Bat Toggle

Connection: Male 1/4" QC terminals.

Mech: Panel, Standard 3/8" D x 0.476" (12.1mm) long, bushing mount.

Panel hole: 1.328" (33.7mm) long x 0.756" (19.2mm) wide x 0.809" (20.5mm) high, plus contacts.

Note: Center off.

Flat bat 0.305" 97.7mm) wide at base x 0.640" (16.2mm) long, from bushing.

New Old Stock

UL Listed, CSA Approved

Learn More

Carlingswitch - DB101-PBB Switch, Paddle.

Contacts: SPDT.

Contact Ratings: 125VAC/10Amp 1/2HP, 250VAC/5Amp.

Actuator: Plastic, black. Mech: Panel.

Body: 0.858" wide x 0.495" deep behind panel.

Panel hole: Overall: 1.002" wide x 0.584" wide.

Bushing length: 0.286" long. Paddle length: 0.686" long.

Contacts: (3) 1/4" male quick connect terminals.

Note: Listed: CSA. 

Learn More

C & K Components - 7401T1ZQE Switch, Toggle.

Contacts: 4PDT.

Contact Ratings: 5Amp.

Actuator: On/On.

Connection: Solder Terminals.

Mech: Panel Mount 0.5" D.

Note: Miniature.

Silver Plated Contacts.

Epoxy sealed. SS case.

Learn More

C & K Components - 7103J60ZMI32 Switch, Toggle/Paddle.

Contacts: SPDT.

Contact Ratings: 5Amp 120V, 2Amp 250V.

Contact Material: Silver

Operating Temperature: -30 C to 85 C

Actuator: On-Off-On.

Connection: PC leads.

Mech: Panel, Snap-in.

Panel Hole: 17mm long x 12mm wide x 17mm behind panel plus contacts.

Note: Red Paddle J60 actuator.

Electrical Life: 40,000 Cycles

Complete with black bezel 19.43mm long x 15.62mm wide.

New Old Stock

Learn More

C & K Components - 7205MY9AGE Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 5Amp 120VAC.

Actuator: (On)-Off-(On).

Connection: PC Right Angle (RA) Trminals.

Mech: PCB. Body: 12.9mm long x 11.4mm wide x 11.0mm high.

Overall with actuator and contacts 31.2mm long.

Note: Center off.

Non-threaded bushing 6.9mm long.

Actuator: 6.9mm long.

Miniature C&K 7205.

Learn More

Miyama Electric - MS-245 Miniature Switch, Toggle. Series MS-240 - 245

Contacts: DPDT, MS 245, Double-Pole, ON-ON.

Contact Ratings: 3Amp 125VAC.

Switching Action: Break (OFF), Changeover (On-On)

Connection: Solder.

Max. Contact Resistance: 20 mΩ

Leads: for Soldering

Operating Temperature -10 C to 55°C

Min. Insulation Resistance: 100 MΩ

AC Test Voltage: 1 kV

Mount: Panel.

Body: 0.377" long x 0.321" wide x 0.286" high, plus bushing, contacts and actuator.

Metric Dimensions: Vertical 8.0 X Width 9.0 X Depth 27.5 mm

Note: Threaded Bushing: 0.213" long.

Very Miniature, New Old Stock

Alternate: MS-240.245

Made in Japan

Learn More

JBT - MR1-123 - JBT Switch, Paddle Miniature, Electroswitch B123J2ZQ2.

Status: Discontinued

Contacts: SPDT.

Switch Circuit: On - None - On

Number of Positions: 2 Position

Contact Ratings: 5A 125VAC.

Voltage Rating (DC): 28 V

Contact Material: Silver

Actuator: Paddle. (White)

Connection: Solder PC pins.

Dimensions: Width: 0.47 in, Height: 1.34 in, Length: 0.75 in

Mech: Panel Mount, two holes 0.93" spacing plus two 0.25" spacers, screws & nuts.

Genuine  JBT - New Old Stock

Note: Formerly Eaton (JBT) Now Electroswitch B123J2ZQ2

Alternate: B123J2ZQ2-ND, Allied 70152395

Made in USA

 

Learn More

JBT - JMT-123 - 5930-00-027-0247 -Switch, Toggle.

Aircraft Toggle Switches - Panel Mount

Contacts: SPDT.

Contacts: Silver

Contact Ratings: 5Amp 125VAC, 3Amp 250VAC.

Actuator: Both Switches are On-On.

Mounting Faceplate 1.317" wide x 3.150" high.

Right Angle Mountable Edge/Flange with 2 holes at 2.15" centers.

Note: Two SPDT Miniature Toggle Switches with only SPST in use.

Assembly marked HI has three wires, LO has 2 wires from switch, joined to a 3 Position male connector.

Proudly Made in USA

Switch Alternates: A123S1YZQE, 7101SYZQ, 7101SYZQE, MST-105D

UPC 0767842189378

NSN: 5930-00-027-0247

Note: Surplus Assembly for a Discontinued Project - New

 

Learn More

EATON - JBT - 3-627 Switch, Instrument Toggle.

Contacts: SPDT.

Contact Ratings: 6Amp 125VAC, 3Amp 250VAC.

Actuator: Center-Off, 1 side momentary, ON/OFF/(ON).

Bushing Diameter: 0.24"

Connection: 3 Solder Terminals.

Mech: PCB. Miniature Toggle.

New Old Stock - Made in USA

Learn More

JBT - PFH-4223P Switch, Toggle, Heavy Duty AC Industrial

Contacts: SPDT.

Contact Ratings: 20Amp 125VAC, 10Amp 250VAC (3/4HP 250VAC, 1/2HP 125VAC).

Actuator: Off-On.

Connection: Brass Male 1/4" Quick Connect Terminals.

Mech: Panel, standard 3/8" D x 0.470" (11.9mm) long, bushing mount.

Panel hole: 1.339" (34.0mm) long x 0.750" (19.0mm) wide x 0.811" (20.6mm) high, plus contacts.

Note: Flat Bat 0.362" (9.2mm) wide x 0.653" (16.5mm) long.

Vintage - New Old Stock

Typical Applications: Marine, Food Service, Generator, Industrial Control ,Office Automation

Proudly Made in USA

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 15A/125VAC 0.5HP, 10 Amp 250VAc. Actuator: On-None-Off. Connection: solder terminals. Mech: PCB, bushing is threaded. Body: 1.121" wide x 0.631" deep x 0.619" high. More info: page 154 http://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/pg07002001e.pdf Learn More

Cutler-Hammer / Eaton - 8906K4919 Switch, Toggle. SPDT Environmental Sealed, Resistant to Dust, Dirt, Spray Extreme Temperatures Contacts: SPDT. Contact Ratings: 10A 125VAC. Mech: Panel, bushing (11.7mm) long. Panel hole: 30.1mm long x 12.4mm wide x 18.4mm deep plus contacts, behind panel. Overall Dimensions: 31.9mm long x 15.0mm wide x 23.9mm deep, plus contacts Connections: Male 1/4" Quick Connect Terminals. Note: Actuator: 17.2mm long. Environmentally Sealed. Factory new, complete with hardware, indiv packaged. Temperature Range: -85°F to +160°F (-65°C to +71°C) Life: 20,000 operations at rated load 40,000 operations mechanical life Requires 0.47" diameter hole to mount, 15-32 Bushing 32 Thread Actuator: Momentary-both-sides, Must Pull-to-switch One side only. Aircraft-Instrument Military-Purpose Style Learn More