Rotary Switch

OHMITE - 412-B - Power Tap Rotary Switch - 1 Pole, 3 Position, 50Amp 300V.

Configuration: SP12T

Current / Voltage Ratings: 50Amp 300VAC, 50Amp 20VDC.

Contacts: Silver Alloy

Body: Ceramic

Angle of Throw 30 Deg.

Mount: 1/4" Panel. A 5/16” hole in panel is required for shaft.

Actuator: Flatted (6.35mm D).

Dimensions: 4 3/16" Width 

Mounting:Three 10-32 flat-head machine screws 3/8” long. 

Note: Power Tap Switch.

Connections: Solder Lug.

Used / Removed from Equipment - Good Condition

Made in USA

 

Learn More

OAK INDUSTRIES - 3-251 Switch, Rotary.

Robust switch designed for commercial applications. Some advantages to open frame construction are that the switches have more flexibility on custom contact configurations and that they have sections that are sold separately. Shorting describes the action of the contact when you select your switch positions. With a non-shorting switch the connection is momentarily broken when you rotate from position 1 over to position 2

Contacts: 5 Position.

Connection: Solder Terminals.

Mech: Panel, 3/8" bushing.

1.5A @ 28VDC

Genuine Vintage Oak Industries - New Old Stock

Age related tarnish on silver contects does not impact operation.

Proudly Made in USA

Body: 1.532 (38.9mm) D x 651" (16.5mm) high plus seated bushing 0.378" (9.6mm) long, shaft 1/4" flat 0.329" (8.33mm) long.

Note: Phenolic wafer. PLEASE READ AND COMPREHEND PRIOR TO WIRING SWITCH! The contact switching arrangement is as follows. Terminal positions are numbered counterclockwise from the rear view of the switch. There are 24 physical segments. Orient the rear of the switch so that the mounting screw nuts are above the arc of rear side contacts with 4 terminals including two wipers. Start numbering immediately right of the left nut, being position 1 and increasing counterclockwise. Terminals on the visible side have even numbers and those on the other side have odd numbers. Empty holes are numbered as well. There are four wipers on the switch at positions 1, 2 , 10 and 13. Position 1 [No contacts are connected] Position 2 [1-3 and 13-15 are connected]Position 3 [1-5 , 13-17 and 10-16 are connected] Position 4 [1-7, 13-19 and ,10-18 and 2-6 are connected] Position 5 [1-9, 13-21 and 2-8 are connected]All contacts are non-shorting [break-before-make)

Learn More

Switch, rotary. 3-Position Center-Off Momentary-both-sides Selector Switch, appears to have Two SPDT contacts. Black handle with white stripe. 1.25" square x 3-3/8"L - new Learn More

Switch, rotary. Two (2) pole, 6 position. Dimensions: overall 1.2" wide x 0.650" plus pcb pins x 1.361" including shaft. Mount: RA PCB with double row 12 pins and 3 pins above. Threaded bushing 3/16". Shaft : 1/8" D x 0.357" long.

Learn More

Switch, rotary. 1P BCD 0-9 position. Thumbwheel. Series 2100. Package: 6 Dip. Note: more info at http://www.eecoswitch.com/product/2100-series/ Learn More

Cutler-Hammer / Eaton - CH Switch Salesman Sample Kit

Large Assotment of High-Eend Industrial Switches incliusive of Key, Rotary, Pushbutton, Limit, & Special Switches. 

23-piece Switch assortment kit used by Cutler Hammer salesmen.

24 pc counting the Attractive Black Carrying Case.

Proudly Made in USA

Learn More

Switch, rotary. Selector shaft 12"/300mm. Learn More

CTS - 3-234 Switch, Rotary.

Contacts: 2-Pole 3-Position.

Connection: SilverSolder Terminals.

Mech: 0.25"D threaded bushing 0.35"L.

Body: 1.0"D x 0.6" behind panel.

Shaft: 0.125"D shaft 0.4"L.

High Quality Rotary Switch

Vintage New Old Stock

Silver contacts starting to tarnish that does not affect operation. 

Learn More

CTS - 3464565-1 - Switch, Rotary.

1 pole 11 position, 2 sets of 5 positions.

Type: Hill and valley detent

Connections: Solder Lug

Unusual Pattern.

Vintage - New Old Stock 

Learn More

Switch, rotary. Contacts: 3PST. Connection: solder terminals. Note: Bushing length: 0.579" long. Actuator: 1/4" flattened, 0.514" long. Note: 3 Tier. Made in the USA. Learn More

Honeywell Clarostat - CM23267, 966081-304B Rotary Switch

Contacts: SP3T.

Mech: Bushing 3/8" D.

Body: 1.027" tall x 0.894" D round.

Overall with shaft is 1.923" high .

Note: Shaft: 1/4" with 3/8" threaded bushing, sealed with 4 Conductor stranded teflon coated 12" leads.

Double marked 966081-304B.

Learn More

Cole - Hersee - 3-116 - Switch, Rotary, Heater/Fan. 3 Position Switch.

Cole Hersee has been providing reliable world class switching products to the automotive, marine and trucking industries since 1924.

Contacts: 3 Position, Heavy Duty High DC Current.

Actuator: Off-Both On-One On.

Connection: Has 4 female contacts on the back that will accept 4 male bullet terminals (2 of the contacts are connected).

Mechancal: Panel Mount.

Body: Round 1.4" D x 0.70" high.

Threaded Bushing: 0.356" long (seated). Shaft:0.187" (3/16") Half Flattened (D).

Applications: Automotive/Marine 2 Speed Heater/Fan/Blower or Headlights Switch.

New Old Stock (Tarnished) 

Made in USA

Learn More

Rockwell collins - 269-1017-00 Switch, Rotary.

2P Manual set / Electric reset.

Voltage: 26.5VDC.

Thread Class: 2B single mounting facility

Hazardous Locations/Environmental Protection: Dustproof

Overall Length: 2.906 inches nominal

Shaft Diameter: 0.248 inches minimum single actuator and 0.250 inches maximum single actuator

Shaft Length: 1.156 inches nominal single actuator

Overall Diameter: 1.625 inches maximum

Operating Temp Range: -50.0/+85.0 deg celsius

Switch Contact Basic Design: Nonpile-up symmetrical

Pole Quantity; 2 single section rear

Throw Quantity: 2 single section rear

Mounting Facility Circle Radius: 1.000 inches nominal single mounting facility

Mounting Method: Threaded hole single mounting facility

Features Provided: Metallic inclosure

Thread Quantity per Inch: 32 single mounting facility

Nominal Thread Size: 0.138 inches single mounting facility

Contact Voltage Rating in Volts: 29.2 dc at sea level

Mounting Facility Pattern: Three position circular single mounting facility

Switch Actuator Indexing Position Quantity: 2 single actuator

Shaft Type: Round single actuator

Terminal Type: Tab, solder lug

Switch Actuator Positioning Increment: 60.0 degrees single actuator

Contact Load Current Rating: 5.0 amperes resistive load dc at sea level

Precious Material and Location:                 Contact surfaces silver

Precious Material: Silver

Style Designator: Snap or line

Thread Series Designator: Unc single mounting facility

New Old Stock - aerospace Quality

Silver Contact tarnish does not impact opertion

Proudly Made in USA

NSN: 5930-00-432-2645

Alternate: Bendix or Ratheon C218382CHANGEBPT2

Learn More

ALCO ELECTRIC - DRM16CRA - Switch, Rotary with Mini Shaft.

Status: Discontinued

Hexadecimal Complement. 16 Position BC Comp - 0-9 + A-F.

Side Actuated, Right Angle.

Actuator: Raised.

Contact Finish: Gold

Mount: PCB, Through Hole.

Ratings: 0.4VA at 20VAC/DC.

Mechanicl/Electrical Life: 20,000 Steps

Alternate: 1825008-7-ND

New Old Stock

 

Learn More

WESTON ELECTRIC - 1604D/410-104 Switch, Dip, Rotary.

Contacts: 4 Position.

Mech: PCB 16 Dip.

Learn More

Switch, rotary. SP7P, shorting. Mount: PCB. Learn More

3 TIER ROTARY SW

Learn More

Switch, rotary. Contacts: 3 Position, 2 NO. Actuator: Black knob. Note: Pilot devices. Shiny metal bezel. Learn More

OHMITE - 212-4 - Power Tap Switch, Rotary.

Power Tap 4P

Current/Voltage: 20Amp (AC/DC), 150VAC/20VDC.

Contact Material: Silver Alloy

Number of Pins: 4

Circuit per Decks: SP4T

Index Angle: 90 Degrees

Termination: Solder Lugs

Diameter: 2.27", Height: 2.28"

Length: 25.4mm

Non-Shorting.

Made in USA

Alternate: 212-4-ND, Mouser 588-212-4, Newark 04H6333

Learn More

Switch. Rotary contact block/ housing only. No actuator. NIB, with manufactures installation sheet. Learn More

GRAYHILL - 50CD36-01-1-AJN Switch, rotary.

Contacts: SP10T.

Contact Ratings: 200mA 125VAC (220VAC/28VDC).

Connection: Solder.

Elect config: Panel, Bushing.

Panel hole: 0.5" D. Shaft: 1/8" D, Flattened x 0.375" long.

Note: Miniature. One pole/one deck.

Non-Shorting.

Angle of throw: 36 Deg.

Learn More

Switch, rotary. Contacts: 4PDT 12 Position. Contact Ratings: 1Amp 115VAC. Connection: solder terminals. Mech: panel. Body: 1" Diameter. Note: With adjustable stop. 30 Degree indexing. More info: http://www.grayhill.com/web1/images/ProductImages/Rotary_42,43,44,54.pdf Learn More

GRAYHILL - 94HAB10RA Switch, Dip, Rotary.

Contacts. 10 Position 0-9 BCD.

Contact Ratings: 100mA at 50VDC.

Actuator: Flush.

Mount: 6 Pin Right Angle

Life: 10,000 Cycles

More info: http://www.grayhill.com/web1/images/ProductImages/DIP_Series_94H.pdf

Alternate: Omron A6A-10CS

Learn More

71A30-02-3-03S Switch, Rotary.

Contacts: 6P3T.

Contact Ratings: 0.5A/28VDC resistive, 0.25A/28VDC inductive, 0.5A/120VAC resistive, for 10,000 cycles of operation.

Connection: Solder.

Electrical Contact Configuration: Shorting.

Mech: Mounts in 0.25" D hole.

Shaft Diameter 1/8" (0.125") (3.1mm) D x 9.4mm long, half flattened.

Note: 2 Deck, 30 Deg Angle of Throw.

Learn More