Microswitches

Marquardt - 1052-7325 Miniature Micro Switch with Roller Actuator

Contacts: SPDT. NO & NC Contacts

Contact Ratings: 5Amp. 125 to 250 VAC 1/10 HP

Precision Miniature Snap Switch with roller. 

Connection: Quuick Connect (0.112") or Solder

Dimensions:Approximately 0.800" X 0.250" Think X 1.120". (20.3 X 6.4 X 28.4 mm)

Two Mounting holes Approximaetly 0.357 apart (9 mm) 

UL CSA Approved

Made in Germany

Learn More

MICRO SWITCH - 37XL11XC-02 - Switch, with Roller.

Hall-Effect 37XL11XC-02 mounted on right angle bracket.

Three switch leads have been unsoldered.

Used but Guaranteed.

Learn More

Switch, micro. Contacts: DPDT, one position momentary. Note: Explosion proof. Single switch unit with 6 conductor, 6 foot wire leads. Learn More

HONEYWELL - Premium Miniature Microswitch - V7-4A23E9 - Switch, Micro, Pin Plunger.

Status: Discontinued

Contacts: SPST Normally Open.

Contact Ratings: 5Amp 125, 250, 277VAC (1/10HP 250VAC).

Connection: 1/4" Male QC terminals.

Mech: Panel.

Panel hole: 28.8mm long x 10.2mm wide x 16.0mm high with 24.2mm centers.

Operating Force: 25 g max.

Learn More

Honeywell Microswitch - UM10A10B01 - Switch, Micro, Flat lever.

Status: Discontinued

Contacts: SPDT.

Contact Ratings: 0.1Amp 250VAC.

Elect Config: 3 solder leads.

Mech: PCB. Body: 19.7mm long x 6.4mm wide x 11.0mm high.

Note: Actuator length: 18mm.

Very Sensitive.

Double marked 20806T.

Listed: UL/CSA.

Alternates: Omron SS-01GL-E, Newark 83T1225

Learn More

Honeywell/Microswitch - PTY2091 - PUSH / PULL 2-Position Maintained Switch Assembly Model-B

2 Position Maintained Contacts

Industrial, Full Voltage

Applications: Safety Emergency Stop/Start Switch

In Manufactures Packaging with Installation Instructions

UL CSA Approved

Note: Lens Cap Purchased Separately

Alternates: Senasys PTY2091, ITT G330207-1, NSN 5930-01-244-0512

Proudly Made in USA

Learn More

Honeywell - Microswitch - YZ-RS-NT Switch, Micro, Limit.

SPST-Normally Open.

15A-125-480VAC, 1/8-1/4HP.

Standard Basic switch with Stainless steel plunger sealed with neoprene or elastomer, Phenolic case and cover.

Mounting: 2 holes 1.0" spacing through side.

Size:0.7"W x 1.95"L x 1.4"H including plunger.

Less than 1mm travel for snap switch action, approximately 3mm over-travel.

Two Screw Terminals.

Note: Used, Removed from Equipment

Proudly Made in USA

Learn More

Honeywell/Microswitch - 11SM1 Switch, Sum-Miniature, SM Series Pushbutton.

The 11SM1 is a single-pole double-throw (SPDT) Subminiature Basic Switch with a plunger actuator and solder terminals. It has silver contacts and it is used for simple or precision ON/OFF application needs. The MICRO SWITCH™ SM series switch is slightly larger than the MICRO SWITCH™ SX series switch. This switch combines small size and light weight with ample electrical capacity, precision operation and long life. The SM Series offers gold contacts for low-energy switching and gold bifurcated contacts for maximum reliability. Bifurcated contacts provide parallel redundancy within the SM switch.

Contacts: SPDT Snap Action, Pin Plunger Limit Switch.

Contact Ratings: 5Amp 250VAC. 30 VDC

Connection: 3 Turret Posts.

Operating Force 5 Oz

Mech: PCB. Body: 19.8mm long x 6.5mm wide x 9.0mm high.

Standards: CE: 61058-1; UL: E12252; CSA: LR41372, ENEC

New Old Stock

Learn More

Honeywell/Microswitch - YZ-2RQ1  Switch, micro, pushbutton.

Contacts: SPST.

Contact Ratings: 15Amp 125VAC, 250 or 480VAC.

Actuator: Momentary.

Mech: Panel mount, for single hole bushing mt.

Threaded bushing: 0.504" long x 0.467" D.

Actuator length: 0.381" long.

Used/Removed from equipment.

Learn More

DEFOND - DMA1211- 9-01 Switch, Micro, Lever, Snap Action.

Series 1211

Contacts: SPDT. NO & NC Contacts.

Ratings: 11Amp 125VAC, 6Amp 250VAC, 0.5Amp 125VDC.

Actuator: Lever, extending 11.2mm from main body of switch.

Connection:  3.16" Male Quick Connect Terminals.

Switch Circuit: Momentary, 2 Position

Mech: PCB or Panel Mount.

Panel hole: Body 28.0mm long x 9.7mm wide x 15.9mm high. (W: 0.39" X H 0.91" X 1.92")

Has 2 hole mount at 24.5mm centers.

New Old Stock 

Learn More

Detroit Controls - CBPD-4-5SP - 3-581 - Switch, Micro, Sensitive Lever Assembly.

Contacts: SPDT.

Contact Ratings: 10Amp 125/250VAC (1/3HP 120-250VAC).

Connection: Male 1/4" Quick Connect Terminals, or Solder.

Mechanical: Panel, Assembly on a Bracket with a Plastic Guide.

New Old Stock - Never Used Overstock Assembly

Note: May have been designed for use on a coin changer.

Note: Sturdy Bracket can be used to detect parts or Switch can be removed 

Approvals: UL, CSA

Learn More

Crouzet Corp - 831613-04 Switch, limit.

Contacts: SPST-Normally Open.

Contact Ratings: 12A.

Actuator: Momentary Roller Lever - Standard Force, Snap Action.

Connection: 3/16" Quick Connect Terminals with Solder Hole.

Mech: Two Holes 1.0" spacing.

Note: Verified for nine international standards.

New Old Stock

 

Learn More

Cherry Electrical Products - E68 - E68-98A - Switch, Push Button.

Designed for worldwide safety specifications these line interrupt switches incorporate direct action, doublemake/double break shorting bars and 3 mm minimum contact gap. Two parallel return springs, either of which could safely break the circuit alone, give added protection. UL listed and CSA approved. Meets other international requirements.

Contacts: SPST.

Type: Short Button Momentary (Flat Top)

Contact Ratings: 0.1Amp 125VAC.

F83: Gold cCosspoint contacts for low energy switching. Rated 0.1 Amp at 1250 or 250 VAC.

Contact Plating: Gold

Actuator: Normally Open, Momentary.

Connection: 3/16" Male Quick Connect Terminals.

Mech: Panel, Snap-In.

Panel Hole: Flange 1.258" long x 0.684" wide.

Snap-In Panel 1.170" to 1.230" x 0.983" deep plus contacts x 0.539" wide.

Color: White.

Operating Temperature: -40 C to 85 C

Life: 6,000 Cycles

Alternate Similar to E68-40A with Short Flat Button

New Old Stock - Slight Tarnish on QC terminal does not affect operation

Learn More

ZF Electronics - CHERRY ELECTRICAL PRODUCTS - DN3AGWAC Switch, Micro lever.

Contacts: SPST.

Contact Ratings: 0.1Amp 125VAC.

Connection: Two Pin (interior).

Mech: panel, snap in, with two mount holes at 25.0mm centers.

Panel hole: For hole 35.8 to 38mm x 10.6mm wide.

Please see manufacture spec sheet for exact measurements.

Lever extends approximately 11.2mm from body.

Note: Also marked 110K2250 RevB.

Listed: UL/CSA.

Learn More

CHERRY ELECTRICAL PRODUCTS - E21-00A Switch, Micro P/B.

Contacts: SPDT.

Contact Ratings: 0.1Amp 125VAC.

Connection: Solder (Soldered).

Mech: Panel, with two mount holes at 25.0mm centers.

Panel Hole: 28.1mm (28.2mm) long x 9.8mm wide x 15.9mm high.

Note: Sensitive.

Used/Removed from equipment.

Learn More

ACRO - 2MC3 1A  Switch, limit.

10Amp 125VAC, 5A 250VAC

SPST - NC Contacts.

Momentary Snap Switch,

Small Pin Push Button.

Mounting type - Solder

6.9 x 41mmL x 23mmH.

New Old Stock

Learn More

Switch, pushbutton. Contact Ratings: 3Amp 250VAC. Actuator: NO, NC. Note: Very sensitive. Used/Removed from equipment. Package of 3. Learn More

Switch, micro pushbutton/pin plunger. Contacts: SPDT. Connection: solder. Body: 1.097" long x 0.323" wide 0.626" high, with two hole mount at 0.97" centers. Learn More

Switch, micro pushbutton/pin plunger. Contacts: SPDT. Connection: solder. Body: 1.097" long x 0.323" wide 0.626" high, with two hole mount at 0.97" centers. Learn More

Honeywell Industrial Premium Large Base Switch, BZ Series.

MICRO SWITCH™ Premium Large Basic Switches: BZ Series, Single Pole Double Throw (SPDT), Split Contact Construction Allowing Two Isolated Circuits, 5 A 250 Vac, 5 mm [0.20 in] Diameter Hardened Steel Additional Overtravel Plunger, Binding Head Combination Screw Termination with Integral Washer, Mounting Holes will Accept Pins or Screws, UL, CSA.

Status: Discontinued 

Contacts: SPDT with w/N.O. & N.C. Contacts. 

Split Contacts Allowing Two Isolated Circuits.

Rating: 5A 250VAC.

Contact Material - Silver.

Actuator: Pin Plunger with 0.03" (0.76mm) Pre-Travel and 0.06" (1.52 mm) Overtravel.

Connections: Five Screw Terminals.

Hardened Steel Plunger.

Mech: two 0.13" holes 1" spacing.

Body: 0.69" x 1.95"L x 1"H plus 0.55"H plunger. (49.28 X 17.45 X 44.45mm).

Operating Temp: -67F to +185F (-55 - 85C)

Through Hole Chassis Mounting.

Force to Operate  - 26 oz (7.22 N).

Construction - Phenolic. Split Contact Construction allowing Two Isolated Circuits.

Mechanical Life - 20,000 cycles.  

Weight 1.04 oz.

Alternate/Cross: Allied Signal 71145647, Mouser 785-BZ-3YST, BZ-3YST-ND, BZ3YST, 480-4707

RoHS Compliant, UL, CSA, ENEC

POTENTIAL APPLICATIONS: Building controls and equipment, Doors and lifts, Semi-trucks and trailers, Valves, Industrial timers, Communication systems, Foot switches, Commercial and industrial food service equipment, Agriculture irrigation equipment, Medical instrumentation

Proudly Made in USA

Learn More

Switch, micro, push button. Contacts: SPST. Contact Ratings: 460VAC/250VDC, 15Amp AC, 250mA res DC. Actuator: momentary NC, sensitive. Connection: screw terminals. Note: Fully enclosed. Learn More

Honeywell Microswitch - V3L-138-D8 Switch, Micro, Lever, SPST NC.

Gold alloy crosspoint, silver cadmium, and other contact material for special applications 1 Long mechanical life of 10,000,000 cycles. 

Contact Ratings: 11 Amp 1/3HP 125VAC (1/2A 125VDC, 1/4A 250VDC,11A 1/3HP 125, 250, 277VAC, 4 Amp 125VAC).

Connection: Male 3/16" Quick Connect Terminals.

Contact Material: Silver

Mechanical: PCB, 2 hole mount at 0.96" centers.

Panel hole: 1.097" long x 0.397" wide x 0.626" high.

Lever extends 0.425" past switch body.

Note: Listed UL/CSA.

 

Learn More

Guy wire. 4.8mmD red plastic sheath. Includes assortment of heavy duty hardware.

Learn More

HONEYWELL - 311SM8095-H4 Switch, Micro.

SPDT 5A 250VAC. Subminiature basic switch.

Straight 0.90" long lever actuator with 3/8" square paddle welded to end

0.31 N [1.1 oz] maximum operating force

Silver Contacts

Solder Termination.

Listed: CE, UL/CSA.

Learn More