Specialized

New Right Angle Rear Projections Lens - 4"Round Plastic to 5.5"x 4" RectangularCompact Delta 7T-AC REV. B - 9" x 6" x about 6" overall Learn More

Unidentified MFG - R5140 SIZE 1 - Laboratory, Tapered Rubber Number 1 Stopper.

Tapered rubber stoppers may be used in scientific, medical, or food and beverage applications. They’re designed to seal and plug test tubes and other glassware, preventing the contents from being released, and ensuring any contaminants are unable to get in. Tapered rubbers stoppers provide a tighter seal than cork stoppers, and are more appropriate for applications where sterility or chemical resistance is required. 

Number 1, Tappered Rubber Stoppers.

Code R5140.

Material: Rubber.

Color: Black.

Top Diameter: 3/4", (.748" ), 19mm

Bottom Diameter: 1/2",  (0 .511" ), 13mm

Length: 1", (1.023"), 26mm

Durometer: 55

New Old Stock

Alternates: 7-R01-S-EPDM-RS, TRS-1-BKN, 32827461

Note: Exhibits outstanding resistance to heat, ozone, steam, and weather. It is an electrical insulator.

Priced Each, Large discount for package of 62.

Proudly Made in USA

Learn More

ALNiCo - NEO25 - Magnets, Neodymium, - Super Strong Commercial Rare Earth Magnet.

Rare earth magnets are very strong magnets made from alloys of rare earth elements. They are the strongest among the permanent magnets made. These magnets can be manufactured through sintering, compression bonding, injection molding, and extrusion. Neodymium magnets have the highest energy product of any material, and this type of magnet is known for its ability to be created in a wide range of available shapes, sizes, and grades. 

South Pole Inside Curve. North Pole - Flat Surface.

Dimensions: 7/18" x 1/3".

Applications: Wind Turbines, Linear actuators, Microphone assemblies, Servo motors, Tape recorders, Alternators, Pacemakers, DC motors, Flow meters, Holding Assemblies, Lifting Magnets, Magnetic Fanners.

Extreme caution must be taken when working with rare earth magnets. Magnets larger than a few centimeters are strong enough to cause injuries to body parts pinched between two magnets, or a magnet and a metal surface, even causing broken bones. Magnets allowed to get too close to each other can strike one another with force to chip and shatter the brittle material, and the flying chips can cause injuries.

Learn More

ALNiCo - NEO20 - Magnets, Neodymium. Super Strong Commercial Rare Earth MagnetSouth=Flat surface (North/Curve).

Rare earth magnets are very strong magnets made from alloys of rare earth elements. They are the strongest among the permanent magnets made. These magnets can be manufactured through sintering, compression bonding, injection molding, and extrusion. Neodymium magnets have the highest energy product of any material, and this type of magnet is known for its ability to be created in a wide range of available shapes, sizes, and grades.

Dimensions: 1' long x 0.42" wide x 0.12" high.

Flat on one side and has a convex top.

Applications: Wind Turbines, Linear actuators, Microphone assemblies, Servo motors, Tape recorders, Alternators, Pacemakers, DC motors, Flow meters, Holding Assemblies, Lifting Magnets, Magnetic Fanners.

Extreme caution must be taken when working with rare earth magnets. Magnets larger than a few centimeters are strong enough to cause injuries to body parts pinched between two magnets, or a magnet and a metal surface, even causing broken bones. Magnets allowed to get too close to each other can strike one another with force to chip and shatter the brittle material, and the flying chips can cause injuries.

Learn More

CS2223M1 Power Supply Board, High Voltage, 15K VDC.

Approx 15,000VDC no load.

Current: Unknown.

Input: 120VAC.

Dimensions: 5 x 4 x 1" tall.

Red & Black #22 XLPVC Leads good for 20KVDC.

Note: Very nicely made.

Learn More

ALNICO - 8-948 - Magnets, Neodymium, Super Strong Commercial Rare Earth Magnet.

Rare earth magnets are very strong magnets made from alloys of rare earth elements. They are the strongest among the permanent magnets made. These magnets can be manufactured through sintering, compression bonding, injection molding, and extrusion. Neodymium magnets have the highest energy product of any material, and this type of magnet is known for its ability to be created in a wide range of available shapes, sizes, and grades.

Two on an odd shaped 2.2" "C" shaped steel bracket with two rubber rollers and a steel cover plate.

Dimensions: Trapeziodial Shaped, 0.25" thick by 0.7" at the top, 0.6" high and approximately 0.54" at the bottom.

Magnets are epoxied to steel plate and are very strong but brittle. Can be removed with much care or used to lift a few pounds. Keep all Neo magnets Far Away from any magnetic media such as audio or video tapes or floppy discs, etc.

Applications: Magnetic Separators, Wind Turbines, Linear actuators, Microphone assemblies, Servo motors, Tape recorders, Alternators, Pacemakers, DC motors, Flow meters, Holding Assemblies, Lifting Magnets, Magnetic Fanners.

Extreme caution must be taken when working with rare earth magnets. Magnets larger than a few centimeters are strong enough to cause injuries to body parts pinched between two magnets, or a magnet and a metal surface, even causing broken bones. Magnets allowed to get too close to each other can strike one another with force to chip and shatter the brittle material, and the flying chips can cause injuries.

Learn More

Clear Lucite - Light Diffuser.

Overall Dimensions 1.4"OD x 1.94"High.

Coarse Threaded Outer Diameter measures 1.250" Inner  Thread Diameter 1.17"

Threaded at bottom with large hole inside 1.5" Deep Rounded by 0.47" I.D.

Made in Taiwan

Package of 2

Learn More

0.148" (3.7mm) square MAGNETS 0.94-Inches Long FOR REED SWITCHESLow Power but could be remagnetized stronger

Learn More

Computer Related. USB-A to USB-B Cable.

• Burst data transfer rates up to 480 Mbps (system dependent)
• Compliance with the USB 2.0 serial bus interface standard
• Backward compatibility with all USB 1.1 interfaces

Standard USB Male to Male Cable.

Length: 6 Foot.

Color: Beige.

Temperature: 60 C

High Speed Transfer:  Up to 480 Mbps transfers data speed for USB 2.0 devices

Backwards compliant with USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps).

Cable Specifications: 2835 E87647-DG AWM 60 Deg C 30V VW1.

UL Approved

New Old Stock

Applications: This cable is designed to interconnect devices with USB interfaces. Ideal for connecting an audio interface, Printer, Scanner, Server, Fax, camera, piano, USB microphone or instrument, and many other peripherals to a PC. 

Learn More

24VDC SOLENOID ELECTRIC pretty 1.5"OD Cylinder 3.37" long shiny & NEW - Very special fast acting plunger - MS 2-pin connector - quality Aircraft part - threaded mounting - Mfr "RS" Learn More

TYCO Potter & Brumfield - 2IO-4C - Mounting boards for 4 - Input/Output

Mounting boards for 4 - Input/Output modules. 

AC Input/AC output, DC Input/dC Output

Screw terminal logic connections.

250V 50/60 HZ, 4A

120V 50/60 HZ, 4A

Rare/Discontinued - New in Mfg. Packaging.

Made in USA 

Learn More

TRANSITION ENGINEERING - CX-1134-6 Connector, BNC.

Premium extended CX-1134-6 RJ11 female to 6" coax cable compatible with AT&T, ITT, LEE DATA, MEMOREX, TELEX type A devices data rate 2.35Mbps.

Transmission distance is 50 feet min and 2500 feet maximum.

Unit has three winding transformer/choke configuration to filter RFI.

Coax cable requirement is 90-110 Ohm.

Made in USA

Learn More

TELOS SYSTEMS - TELOS 100 - Telephone Switchbox Assembly.

Made for radio DJs and TV stations.

Used, untested, operating conditions unknown.

Priced andsold as if for parts only although some may be operational. 

Many sold with repeat customers.

Learn More

ANSELL AlpaTec SOL-VEX - 37-175-11 - 15 Mil Gloves, green Nitrile. Size11. Package of 12 Pr.

Applications: Chemical Plants and Transportation, Chemical Processing, Oil Refining and Petrochemicals, Cleaning and Degreasing, Exposure to Chemicals, Solvents, Hazardous Liquids, PVC Cements or Standing Water, Janitorial and Maintenance Work

Gloves, Green Nitrile. Size: 11.

Flock-lined, Straight cuff.

Sandpatch Grip Design.

12 - 13" Length.

15.00 mil Thickness. ANSI/ISEA Puncture Level: 3

Industry Standards: ANSI 0 (Cut), EN388 3101, EN374 AKL, EN374 Micro, FDA 21 CFR 177.2600   

High performance Nitrile - Reliable chemical protection. Reduced chemical burns and caustic exposure. Puncture and abrasion protection. Reduced hand injuries. Cotton flock liner - Moisture absorption, Reduced dermatitis and increased comfort.

Component Materials Comply with 21 Cfr 177.2600 for Food Contact

Marked: For protection against OTTO Fuels.

USDA Accepted. FSN: 8415-01-147-6263.

Package of 12 Pr.

Learn More

Boards. PC assembly. 1-Mode V-Div 9" HP tube. Learn More

Tubing, heat shrink. 1/2", 600V. Color: black. Package of 10 feet. Learn More

AV Equipment/Video. Lens / TX zoom, fast f1:1.6 C-mount 11-110mm, 6-12VDC input power. Lens size: Large 3" D opening. Electrically operated with cable and connectors. Dimensions: approximately 7.25" L x 4" x 5". Cross: Picker P/N T10-J374-001. Learn More

READ/WRITE TS04 N00024-85-C-6098 board Learn More

Plus 50 Lens, extension.

Optical diffuser.

For X-band radar (antenna) detector.

Dimensions: 2.45" D x 0.68", plus 2 0.33" mounting tabs.

Learn More

POLYPHASER CORP - IS-NEMP-C2 - High Altitude Nuclear Blast / Lightning Strike Impulse Suppressor.

Coaxial Nuclear EMP Protector. This radio frequency surge protector / lightning surge arrestor helps protect your equipment from electromagnetic pulse (EMP) or power surges that are commonly caused by lightning or other strong electrical changes. Our radio frequency coaxial surge protector product is commonly used for radio and antenna installations where part or all system equipment is outdoors to protect sensitive equipment and is designed to pass 125 MHz to 1 GHz while suppressing DC surge.

Military, government (FEMA and NCA), protection of emergency radio equipment. UL497B listed gas tube, ultra-fast response, and low let through energy. Covers the frequency range of 125 - 1000 MHz. 

Surge Protector Type: Gas Discharge Tube

Frequency: 0.2-1GHz

Connector: Equipment Side = Type N Female, Antenna Side = N Female 

Impedance: 50 Ohm

125 - 220 MHz @ 200W

220 - 700 MHz @ 100W

700 MHz - 1GMHz @ 50 W

DC-Blocked

Operating Temperature: -50 C to 50 C

Throughput Energy: 250 uJ

This series is capable of 50,000A IEC 1000-4-4 8/20uS waveform surges.

The turn-on voltage is 250V.

Length: 2.72" (69.09mm)

NEW w/Spec.

Approvals: CE Compliant, RoHS Compliant

Applications: HF, UHF, VHF Radios, Ham Radio Protection.

Note: Unit must be properly grounded to low impedance (R&L) ground.

Learn More

Picker International - Marconi - 189564 Hardware, Plexiglass / Acrylic Sheet.

Shatter-resistent or lightweight alternative for glass.

Plexiglas sheet is an excellent electrical insulator with a high dielectric constant.

More Heat thermal shock resisant than glass but also has thermal movement 8 times higher than glass.

Dimensions: 4.5" Square x 0.5" thick.

Clear.

Former Application Manufacturer of advanced medical diagnostic imaging systems.

Learn More

Connector, BNC. Female BNC to RJ12 balun. This unit only uses 4 pins of the RJ12 connector. Learn More

TELEPHONE PICK UP COILS WIRED with 5 PIN DIN CONNECTOR - for radios, too - made for NORELCO models 101 150 175 rr25 rr482 4407 4408 Learn More

MSC - 351-29862-003 - Hardware, Heaksink.

Lockheed Assembly 6133771-3 with 8 displays.

Material: Aluminum Alloy 2024.

Dimensions Overall: 6.870" long x 0.812" high x 1.120" wide.

Military NSN 5999-01-097-3865 or NIIN 010973865.

Learn More