Specialized
-
BIRD - 8306-100-N - Coaxial attenuator, 10dB 25 watt.$90.00Coaxial attenuator, 10dB 25 watt. DC-4GHZ 50 Ohm. "N" male to "N" female connectors. Dimensions: 0.994" (25.2mm) D x 5.357" (136.0mm) long. Learn More -
BIRD - 5-1357-3 - Connector, Electronics Solder Eyelet, Rivet/Eyelet/Terminal. Package of 100.BIRD - 5-1357-3 Connector, Electronic Solder Eyelet, Rivet/Eyelet/Terminal.
Electronic eyelets are flanged tubular metal conductors inserted into a printed circuit board. They make electrical continuity between the circuitry on both sides of the board, and are an attachment point for soldering component leads.
Type: Solder.
Appears to be Silver Plated Brass (High thermal and electrical conductivity)
Metric Dimensions: Outside lip is 6.1mm OD, 2.9mm ID with a shaft 3.5mm round and 6.7mm tall under Lip.
Inch Dimensions: Outside lip is 0.240" OD, 0.114" ID with a shaft 0.138" round and 0.264" tall under Lip.
Applications: Secure High Current Electrical and Ground Connections or repairs to chassis and PWBs.
Chose the proper eyelet keeping the following in mind:
LUF The length of the eyelet barrel under the flange should be 0.020-0.035”/0.630-0.890mm greater than the thickness of PCB(this allows the for the right length after the flange is formed)
ID Eyelet inside diameter should be 0.003-0.020”/0.075-0.500mm greater than the component lead diameter for proper fit of the eyelet through-hole component lead.
FD The flange diameter should be sized so that it does not protrude out onto other pads or conductors in the vicinity
OD The clearance in the PCB hole should allow the eyelet to be inserted without undue force but, but should not exceed 0.125mm greater than the eyelet outside diameter.Additional Information: http://www.intl-eyelets.com/short_course_on_electronic_eyelets.htm
Genuine Vintage Bird Electronics Hardware - New Old Stock
Package of 100.
Learn More -
BIRD - 8305-200-N - Coaxial attenuator, 20dB 15 watt.$90.00Coaxial attenuator, 20dB 15 watt. "N" male to "N" female connectors. Dimensions: 0.995 (25.2mm) D x 4.311" (109.5mm) long. Learn More -
BIRD - 5-702-2 - Connector, SMA. Female RF Connector, Spin-in Type.BIRD - 5-702-2 - Connector, SMA.
SMA (SubMiniature version A) connectors are semi-precision coaxial RF connectors developed in the 1960s as a minimal connectorinterface for coaxial cable with a screw-type coupling mechanism.
Female, Spin-In Type.
Gold Plated
Impediance: 50 Ohms
Mount: Panel/Chassis.
Applications: The SMA connector is most commonly used in microwave systems, hand-held radio and mobile telephone antennas and, more recently, with WiFi antenna systems and USBsoftware defined radio dongles. It is also commonly used in radio astronmy, particularly at higher frequencies (5 GHz+ up to 18GHz).
Proudly Made in USA
Learn More -
BIRD - 8304-100-N - Coaxial attenuator, 10dB 10 watt.$90.00Coaxial attenuator, 10dB 10 watt (5 watt reverse). "N" to "N"connectors. Dimensions: 0.994" D x 3.267" long. Note: A 10dB broadband thruline attenuator (mono-directional) working from DC to 2GHz with +-0.4dB error and 2GHz-4GHz with +-0.8dB error. Continuous power rating is 10Watts (forward) de-rating to 5Watts (reverse). Total frequency range and vswr: 1:1.25, DC-4GHz. Connectors: �N�(m) input, �N�(f) output. Size: 83mm (L) x 25mm dia. Weight: 70gm. Learn More -
BIRD - 8303-300-N - Coaxial Attenuator, 30dB 5 watt.Special Price $89.98 Regular Price $120.00BIRD - 8303-300-N - Coaxial Attenuator
Status: Discontinyed
30dB Attenuator Rated at 5 watt.
"N" Male to "N" Femal connectors.
Dimensions: 0.789" D x 3.27" Long.
NSN 5985-01-302-4577
Genuine Bird - New Old Stock - Rare
Made in USA
Learn More -
BIRD - 8308-100-N - Coaxial Attenuator, 10dB 75 watt.Special Price $98.98 Regular Price $118.50BIRD - 8308-100-N Coaxial Atenuator
Description: Attenuator,fixed
Application Design: Transmission line
Body Material: Metal
Body Surface Treatment: Anodized
Overall Diameter: 2.000 inches
Operating Tempurature Range: -55.0/+70.0 degrees celsius
Voltage Standing Wave Ratio:1.25
Input Impedance Rating In Ohms: 50.0
Output Impedance Rating In Ohms: 50.0
Coaxial Connector Series Designation: N
Power Rating: 75.0 watts average
Rf Signal Attenuation In Decibels: 10.0
Attenuation Accuracy In Decibels: -0.60/+0.60
Connection Type Per Function: Female output and male input
Unpackaged Unit Weight: 15.000 ounces
Terminal Type And Quantity: 2 connector
Frequency Range: 2.000 gigahertz
10dB 75 watt.
"N" to "N"connectors.
Dimensions: 2" D x 6" long, plus contacts overall 8-1/8" long.
New - NSN 5985-01-425-8827
Note: Bird Liquid-dielectric attenuators have never been manufactured with Poly Chlorinated Biphenyls (PCBs)
Learn More -
BIRD - 6500-SP-1000-JN - Specialized, RF. Attenuator BCP 100dB.$25.00BIRD - 6500-SP-1000-JN Specialized, RF.
Attenuator BCP 100dB.
Marked BCP100.
Mount: On 14mm Centers.
Note: Also marked 4706GSN1000JN.
Learn More -
BIRD - 4278-311-1 - Directional Coupler. 0.5-1.0GHz.Special Price $68.98 Regular Price $85.00BIRD - 4278-311-1 - Directional Coupler.
0.5-1.0GHz, 10dB.
Note: Used
Proudly Made in USA
Learn More -
-
BIRD - 8700-TN-0R5-N - Specialized, RF. Attenuator BCP 0.5dB 5 watt.$25.00Specialized, RF. Attenuator BCP 0.5dB 5 watt 91 Ohm. Mount: surface mount/flange 2 hole at 0.861" (12.8mm). Dimensions: 1.205" (30.6mm) long x 0.766" (19.4mm) wide x 0.324" (8.2mm) high. Has 2 copper leads 3.2mm wide x 5.4mm long. Learn More -
BIRD - 7400-TN-50R0-JN - Marked BCP50. One Lead.$25.00BIRD - 7400-TN-50R0-JN - Specialized, RF.
Attenuator BCP 50dB.
Marked BCP50.
One Lead.
Material: Ceramic Form on a Metal Base.
Dimensions: 20.3mm long x 5.9mm wide x 3.3mm high, with 14.3mm mount centers.
Learn More -
BIRD - 4144-060 - Enclosure. For Bird Electronics products.Special Price $9.98 Regular Price $18.50READY TO SHIP - ONLY 3 LEFT IN STOCK!BIRD - 4144-060 - Enclosure.
For Bird Electronics Products.
Material: Metal.
Dimensions: 3.25" x 1.25" square.
Learn More
