Specialized

Coaxial attenuator, 10dB 25 watt. DC-4GHZ 50 Ohm. "N" male to "N" female connectors. Dimensions: 0.994" (25.2mm) D x 5.357" (136.0mm) long. Learn More

BIRD - 5-1357-3 Connector, Electronic Solder Eyelet, Rivet/Eyelet/Terminal.

Electronic eyelets are flanged tubular metal conductors inserted into a printed circuit board. They make electrical continuity between the circuitry on both sides of the board, and are an attachment point for soldering component leads.

Type: Solder.

Appears to be Silver Plated Brass (High thermal and electrical conductivity)

Metric Dimensions: Outside lip is 6.1mm OD, 2.9mm ID with a shaft 3.5mm round and 6.7mm tall under Lip.

Inch Dimensions: Outside lip is 0.240" OD, 0.114" ID with a shaft 0.138" round and 0.264" tall under Lip.

Applications: Secure High Current Electrical and Ground Connections or repairs to chassis and PWBs.

Chose the proper eyelet keeping the following in mind:
LUF The length of the eyelet barrel under the flange should be 0.020-0.035”/0.630-0.890mm greater than the thickness of PCB(this allows the for the right length after the flange is formed)
ID Eyelet inside diameter should be 0.003-0.020”/0.075-0.500mm greater than the component lead diameter for proper fit of  the eyelet through-hole component lead.
FD The flange diameter should be sized so that it does not protrude out onto other pads or conductors in the vicinity
OD The clearance in the PCB hole should allow the eyelet to be inserted without undue force but, but should not exceed 0.125mm greater than the eyelet outside diameter.

Additional Information: http://www.intl-eyelets.com/short_course_on_electronic_eyelets.htm

Genuine Vintage Bird Electronics Hardware - New Old Stock

Package of 100.

Learn More

Coaxial attenuator, 20dB 15 watt. "N" male to "N" female connectors. Dimensions: 0.995 (25.2mm) D x 4.311" (109.5mm) long. Learn More

BIRD - 5-702-2 - Connector, SMA.

SMA (SubMiniature version A) connectors are semi-precision coaxial RF connectors developed in the 1960s as a minimal connectorinterface for coaxial cable with a screw-type coupling mechanism. 

Female, Spin-In Type.

Gold Plated

Impediance: 50 Ohms

Mount: Panel/Chassis.

Applications: The SMA connector is most commonly used in microwave systems, hand-held radio and mobile telephone antennas and, more recently, with WiFi antenna systems and USBsoftware defined radio dongles. It is also commonly used in radio astronmy, particularly at higher frequencies (5 GHz+ up to 18GHz).

Proudly Made in USA

Learn More

Coaxial attenuator, 10dB 10 watt (5 watt reverse). "N" to "N"connectors. Dimensions: 0.994" D x 3.267" long. Note: A 10dB broadband thruline attenuator (mono-directional) working from DC to 2GHz with +-0.4dB error and 2GHz-4GHz with +-0.8dB error. Continuous power rating is 10Watts (forward) de-rating to 5Watts (reverse). Total frequency range and vswr: 1:1.25, DC-4GHz. Connectors: �N�(m) input, �N�(f) output. Size: 83mm (L) x 25mm dia. Weight: 70gm. Learn More

BIRD - 8303-300-N - Coaxial Attenuator

Status: Discontinyed

30dB Attenuator Rated at 5 watt.

"N" Male to "N" Femal connectors.

Dimensions: 0.789" D x 3.27" Long.

NSN 5985-01-302-4577

Genuine Bird - New Old Stock - Rare

Made in USA

Learn More

TE Connectivity Raychem - D06209-000 - ZH2-10.0-0-FSP-SM - Tubing, Heat Shrink, ST Zerohal Polyolefin Black Thin/Single Spool.

Flexible, Highly FlameRetardant, Low Recovery Temperature, ZEROHAL Polyolefin Tubing

Style: Straight, Versafit V2 Tubin

Body Material: Zerohal Polyolefin

Color: Black

Shrink Wall Type: Thin/Single

Inside Diameter Before Shrinking (mm): 10.4

Inside Diameter After Shrinking (mm): 5

Minimum shrink temperature: 70°C [158°F]

Minimum full recovery temperature: 90°C [194°F]

Minimum Operating Temperature (°C): -30

Maximum Operating Temperature (°C): 125

Thickness: 0.56 mm

Packaging: Sold by Complete Reel

Material: Polyolefin (PO) Halogen Free

Features: Flame Retardant Rating UL VW-1

Shrink Ratio: 2:1

Full Reel: 164 Foot Reel (50m)

Applications: Electrical insulation and strain relief of connections and terminations in computers, appliances, and other
commercial electronic products. Jacketing and bundling of light duty harnesses in rail and mass transit vehicles, buildings, and other enclosed areas where emission of toxic gasses from burning materials containing halogens is
very undesirable.

 

Learn More

BIRD - 8308-100-N Coaxial Atenuator

Description: Attenuator,fixed

Application Design: Transmission line

Body Material: Metal

Body Surface Treatment: Anodized

Overall Diameter: 2.000 inches

Operating Tempurature Range: -55.0/+70.0 degrees celsius

Voltage Standing Wave Ratio:1.25

Input Impedance Rating In Ohms: 50.0

Output Impedance Rating In Ohms: 50.0

Coaxial Connector Series Designation: N

Power Rating: 75.0 watts average

Rf Signal Attenuation In Decibels: 10.0

Attenuation Accuracy In Decibels: -0.60/+0.60

Connection Type Per Function: Female output and male input

Unpackaged Unit Weight: 15.000 ounces

Terminal Type And Quantity: 2 connector

Frequency Range: 2.000 gigahertz

10dB 75 watt.

"N" to "N"connectors.

Dimensions: 2" D x 6" long, plus contacts overall 8-1/8" long.

New - NSN 5985-01-425-8827

Note: Bird Liquid-dielectric attenuators have never been manufactured with Poly Chlorinated Biphenyls (PCBs)  

Learn More

3M - 3024 - Tubing, Heat Shrink.

3M Heat Shrink Tubing and Devices provide an easy solution for insulating and protecting wire, cables, connections and components. These field-proven products are known for ease of use and durability, even in extreme conditions.

VM-1 Class 8030  Scotchtite 1",

105 Deg C

Highly Flame-retardant, Flexible Polyolefin, Polyolefin UL VW-1.

Color: Black.

Alternate: FP-301VW

Package of 5 feet.

Learn More

BIRD - 6500-SP-1000-JN Specialized, RF.

Attenuator BCP 100dB.

Marked BCP100.

Mount: On 14mm Centers.

Note: Also marked 4706GSN1000JN.

Learn More

BIRD - 4278-311-1 - Directional Coupler.

0.5-1.0GHz, 10dB.

Note: Used

Proudly Made in USA

Learn More

BIRD - 5186C - RF Filter Low Pass

1000MHz Cut off.

Shielded

Used.

Proudly Made in USA

 

Learn More

Specialized, RF. Attenuator BCP 0.5dB 5 watt 91 Ohm. Mount: surface mount/flange 2 hole at 0.861" (12.8mm). Dimensions: 1.205" (30.6mm) long x 0.766" (19.4mm) wide x 0.324" (8.2mm) high. Has 2 copper leads 3.2mm wide x 5.4mm long. Learn More

BIRD - 7400-TN-50R0-JN - Specialized, RF.

Attenuator BCP 50dB.

Marked BCP50.

One Lead.

Material: Ceramic Form on a Metal Base.

Dimensions: 20.3mm long x 5.9mm wide x 3.3mm high, with 14.3mm mount centers.

Learn More

3M - 3005 - Hardware, Tubing. FR-1 Temflex Heat Shink Tubing.

Shrink Temperature. 105 Deg C.

Dimensions: 0.625" Diameter (5/8") x 0.031" Thick.

No. 3005

Color: Gray.

Listed: FR-1.

Package of 10 Feet.

Made in USA

NEW BUT DISCOUNTED DUE TO AGE. 

Learn More

3M - P831CBD - P831 - Laser Imager 3M - with Protocol MMU920

Category: Imaging

Device: Laser Imager

Manufacturer: 3M Health Care

Model: 3M P831

Part name: Camera Output Formatter Board Assy

Part number: 78-8053-4500-2

Condition: New

Location: Mentor, Ohio

New in Manufacturers crate.

Crate size is 58" long x 33" wide x 61" high.

Weight: 910 lbs.

Original Sale Price: $30,000

Learn More

BIRD - 4144-060 -  Enclosure.

For Bird Electronics Products.

Material: Metal.

Dimensions: 3.25" x 1.25" square.

Learn More