Resistors

CADDOCK - MP821-0.050R Resistor, Power Film.

Resistance: 0.050 Ohm.

Power: 20 watt @ 25 Deg C if Heatsinked.

Tolerance: 1%.

Maximum Voltage: 300V.

Temp coef: TO-220-2,

Micronox Film Bonded to Copper.

Note: Kool-Tab, Non-inductive.

Excellent transparency for tweeter networks.

HEI - FSE-140-0.3  Resistor, Ceramic.

FSE Series.

Ribbed Power Resistor.

Resistance: 0.3 Ohm.

Power: 140 Watt. Ribbed.

Technology: Wirewound.

Mount: Chassis Mount, Resistor Feet/Supports purchased sepately.

Dimensions: Overall 1-1/3" D x 4" long.

Contacts. Solder lug.

Vishay HEI - FS20S/15R Resistor, Ceramic.

Resistance: 15 Ohm.

Power: 20 watt.

Technology: Silicone wirewound.

Dimension: 2-3/8" Long x 1/2" diameter.

More info: http://www.heiresistors.com/PRINTEDcircuit.htm.

Vishay HEI - FS20S/20R Resistor, Ceramic.

Resistance: 20 Ohm.

Power: 20 watt.

Technology: Wirewound.

Silicone Coated.

Mounting: PCB or Solder

Dimensions: 1/2" D x 2-3/8" long.

More info: https://www.vishay.com/docs/31845/fs.pdf

Alternates: Ohmite B20J20R, Vishay HLW20A1Z20R00JF, Vishay FSTL20R1E20R00JENI

Huntington Electric Inc, HEI - AVT-200/75OHM - Resistor, Ceramic. Wirewound

Resistance: 75 Ohm.

Power: 225 watt.

Technology: Adjustable Wirewound.

Enamel Coated.

Mount: Panel, Mounting Feet purchased separately.

Dimensions: Diameter 1.13" (28.7mm), Length 10.5" (267mm)

Twermination: Solder Lug or Bolt.

HEI is now Vishay

Alternates: Vishay RDEA022575R00KFB00, AVT20020E75R00JE

VISHAY Huntington - HEI - FST50A/400R Resistor, Ceramic. 400 Ohm NI.

Marked NI: Non-inductive style (special “NI”) with Ayrton-Perry winding. Ayrton–Perry windings of resistance wire are used to make wirewound RF resistors that are used at high frequencies, where inductance and capacitance are unwanted.The winding is made of two separate wires wound in opposing directions along an insulating form and connected in parallel at the ends. Since there are the same number of turns of wire in either direction, the magnetic fields of the two wires cancel each other out, so the coil has little inductance; and since adjacent turns of the two wires are at approximately the same voltage, there is little parasitic capacitance between the turns.

Power: 60 watt.

Weight: 65.6 g

Technology: Wirewound Non-inductive.

Dimension: 4" (101.4mm) long x 0.878" (22.3mm) diameter, each with (2) 1/4" QC terminals.

Overall: 90.5mm mounting Centers.

More info: http://www.heiresistors.com/PDF/FVT_FST25%20spec.pdf Huntington Electric Inc.

CADDOCK - 1776-24 - Resistor.

The exceptional performance of this extensive family of Type 1776 Precision Decade Resistor Voltage Dividers has been achieved through the special combination of advantages provided by Caddock's Tetrinox® resistance fi lms. This advanced film resistor technology provides the performance characteristics required by the precision input signal circuits of both bench-type and laboratory digital instruments.

Precision Decade Resistor Voltage Divider.

Voltage Rating: 1200V

Resistance Values: 9Meg - 900K - 90K - 9K - 1K Ohms.

Tolerance: 0.25%.

Temperature: -40 C to 85 C

Package: Ceramic 6 Pin SIP.

New Old Stock

Leads may have a bit of residual foam packing that deteriorated and was removed.

Vishay HEI - FST10/10K NI Resistor, Tubular Ceramic. 10K Ohm.

Marked NI: Non-inductive style (special “NI”) with Ayrton-Perry winding. Ayrton–Perry windings of resistance wire are used to make wirewound RF resistors that are used at high frequencies, where inductance and capacitance are unwanted.The winding is made of two separate wires wound in opposing directions along an insulating form and connected in parallel at the ends. Since there are the same number of turns of wire in either direction, the magnetic fields of the two wires cancel each other out, so the coil has little inductance; and since adjacent turns of the two wires are at approximately the same voltage, there is little parasitic capacitance between the turns.

Resistance: 10K Ohm (10,000)

Power: 12 watt.

High Temperature Silicone Coating

Complete Welded Construction

Technology: Ayrton-Perry winding Wirewound Non-inductive.

Operating Temperature: -55 °C to 350°C

Dimensions: 1.761" (44.7mm) Long x 0.394" (10mm) Diameter

Two 3/16 Quick Connect Terminals.

Element:  Copper-nickel alloy or nickel-chrome alloy, depending on resistance value

Core: Cordierite, steatite

More info: https://www.vishay.com/search?searchChoice=part&query=FST10%2F10K

Huntington Electric Inc. - New Old Stock

Alternates: MILLS-71928, FST010

Made in USA

CADDOCK - 1776-C541 Resistor.

The exceptional performance of this extensive family of Type 1776 Precision Decade Resistor Voltage Dividers has been achieved through the special combination of advantages provided by Caddock's Tetrinox® resistance films. This advanced film resistor technology provides the performance characteristics required by the precision input signal circuits of both bench-type and laboratory digital instruments.

Caddock's Decade Voltage Dividers offer small size, low cost and are commonly used in high-accuracy, precision analog metering designs. 

Precision Decade Voltage Divider.

Resistance tolerance +/- 0.1%

Voltage: 750V.

Temperature coefficient 25 ppm/C

Resistance values: 900K Ohm, 90K Ohm, 9K Ohm, 1K Ohm.

Package: 5 Pin SIP

RoHS Compliant

Alternate P/N 21J7886

Huntington Electric Inc, HEI - AVT-100/200 OHM - Resistor, Ceramic. Wirewound

Resistance: 200 Ohm.

Power: 100 watt.

Technology: Adjustable Wirewound.

Enamel Coated.

Mount: Panel, Mounting Feet purchased separately.

Dimensions: Diameter 0.75" Length  6.5"

Twermination: Solder Lug or Bolt.

HEI is now Vishay

Alternates: Vishay AVT10006E200R0KE, AVT10006E200R0JE