Solid State Relay

Relay, SSR. Input: 3-6VDC. Output: 3Amp 240VAC. I/O module. Note: Double marked OAC5A. Listed: UL/CSA. Learn More

CLARE - LCA710 - Relay, SSR.

Contacts: SP NO OptoMOS.

Contact Ratings: 120mA.

Coil Voltage: 60V.

Coil Current: 1Amp.

Coil Resistance: 0.5 Ohm.

Connections: 6 Dip.

Mech Mtg: PCB.

Note: New.

Learn More

Toshiba - TSS16J41S - Relay, Solid Stat Relay, SSR.

Onstate Current: 16 Amp, 600V.

Zero Cross Type.

Operting Temperature: -30 C to 80 C 

Isolation Voltage: 2060 V

Control Current in: 20mA minimum.

Control Voltage in: 6VDC minimum.

Mount: Panel.

No hardware - Old Stock.

Learn More

Relay, SSR. Control: 90-280VAC. Load: 20Amp 280VAC 400Hz. Case. Incapsulated module. Dimensions: 2.003" sqaure x 1.224" high. Contacts: screw. Note: solid state. New older stock. Learn More

Timers, solid state. 1Amp max at rated voltage. Input: 24V. Mount: PCB. Case: module with five 1/4" male quick connect terminals. Dimensions: 2.025" square x 0.75" high. More info: http://www.ssac.com/catalog/TS601A01.pdf Learn More

SSR 5VDC in To 120VAC OUT Learn More

SSR 120VAC to TTL Logic input RFE/Used Learn More

TE Connectivity Potter & Brumfield - IAC15  - NO AC Input Module

The IAC15 input module is used to sense ON/OFF AC voltage levels at 90-140 VAC. All AC input modules are designed with filtering on the input and a hysteresis amplifier for high noise rejection and transient-free clean switching. Each module provides up to 4000 volts (transient) of optical isolation between the field inputs and the logic output of the circuit.

Voltage:120VAC/VDC input (90-140VAC/VDC) 

Input: 15V Logic

Mount: PCB Mount

Alternates: Opto22, Gordos

Used, Removed From Equipment

Learn More

TE Connectivity Potter & Brumfield - IDC5F - 9-1393028-4 - Relay, SSR, I/O. Module.

Case/Package: Module

Mount: Through Hole

Current Rating: 68 mA

Max Input Voltage (DC): -3.232 kV

Operating Temperature: -30 °C to 80 °C

Number of Outputs; 1

Turn-Off Delay Time: 100 µs

Turn-On Delay Time: 50 µs

Voltage Rating (DC); 32 V

Dimensions: Length 31.8 mm

Approvals: CSA, UL

Used Removed from Equipment

Learn More

OPTO 22 - G4IAC24A - SSR

240VAC IN 24V LOGIC OUT SSR NEW

Module, Input, Digital,

180 to 280, Sup-V 24VDC,

15mA Cur-In,

G4 Series Series,

Learn More

EATON COTLER HAMMER OPCON - 8880CS6062 SPCL - AC TRIAC CONTROL MODULE OUTPUT

This Triac operates as a single pole single throw solid state relay for switching non-capacitive AC loads.  

Voltage:115VAC 50/60HZ

Current: 1AMP

TRIAC INPUT 115VAC 50/60HZ 2VA MAX.

With LT/DRK Selectro Switch and Sensitivity Control

Operating Temperature: -40 C to 55 C (-40 F to 167 F)

Approvals: UL, CSA

8880CS6062 is a Special and has a 4 Pin connector ( See Attached Instuctions.) 

With Instruction in Manufacturs Packaging

Made in USA

Factory New Old Stock

Learn More

Compact terminal SSR block with four outputs. Each unit has four G3SD-Z01O-PD 24VDC Dip relays. More info: http://www.ia.omron.com/data_pdf/data_sheet/g3s4_ds_csm43.pdf Learn More

Relay, SSR. 15VDC Logic. 4-16VDC 23mA In. Packaging: I/O Module. Used/Removed from equipment. Learn More

Relay, SSR. 15VDC Logic out. 10-32 VDC or 12-32 VAC. Packaging: Module I/O. Used/Removed from equipment Learn More

Relay, SSR. 4 Channel AC. Input: 90-140VAC. 5VDC Logic. Digital module. New. Learn More

SSR AC Input, 90-140 VAC, 5 VDC Logic, Input: 120VAC, RFE/UsedOr equal Manuf, Opto 22, P&BThe IAC5 input module is used to sense ON/OFF AC voltage levels between 90-140 VAC. All AC input modules are designed with filtering on the input and a hysteresis amplifier for high noise rejection and transient-free clean switching. Each module provides up to 4000 volts (transient) of optical isolation between the field inputs and the logic output of the circuit. Learn More

OPTO 22 - 240D10 - Relay, Solid State.

Power Series relays provide 4000 volts of isolation between input and output, and offer zero-voltage turn-on and zero-current turn-off. They are UL and CSA recognized and are a CE component.

IC, NORMALLY-OPEN PANEL-MOUNT SOLID-STATE RELAY, 1 CHANNEL, M:HL048HD4.4

Input: DC.

Output: 240VAC 10Amp.

Input/control: 3-32VDC.

Connections: Screw Terminals.

Mech Mtg: panel.

Size: 1-3/4" wide x 2-1/4" deep x 7/8" high.

Optical Isolation Input to Output: 4,000 V

Turn-on Time: ½ cycle maximum

Turn-off Time: ½ cycle maximum

Operating Frequency: 25 to 65 Hz (operates at 400 Hz with six times off-state leakage)

Coupling Capacitance Input to Output: 8 pF maximum

DV/DT Off-state: 200 volts per microsecond

DV/DT Commutating: Snubbed for rated current at 0.5 power factor

More info: http://documents.opto22.com/0859_Solid_State_Relays_data_sheet.pdf

Proudly Made in USA

 Used/removed from equipment.

Learn More

OPTO 22 - G4ODC5 Relay, I/O.

Solid state relay.

Quad 5-60VDC, 5V logic.

Number of digital outputs: 1.

Signal input type: 4 to 8VDC.

Output current: 3Amp.

Supply voltage max: 8VDC.

Supply voltage min: 4VDC.

Used/removed from equipment.

More info: http://documents.opto22.com/0254_G4_Digital_DC_Outputs_data_sheet.pdf

Learn More

Relay, SSR. Input: 24VDC. Output: 3Amp 120VAC. Mount: panel. Learn More

240VAC 25Amp SSR RFE/Used Learn More

25Amp 120Vac RFE/Used SSR Learn More

SSR 50MA IN Learn More

SSR SPST-NO 5VDC Output Current Max 50mA Output Current Min 1mA Turn Off Time 20mS Turn On Time 20mS Learn More

SSR 90-280VAC IN 25A 120VAC OUT Learn More