Solid State Relay

OPTO 22 - 240D10 - Relay, Solid State.

Power Series relays provide 4000 volts of isolation between input and output, and offer zero-voltage turn-on and zero-current turn-off. They are UL and CSA recognized and are a CE component.

IC, NORMALLY-OPEN PANEL-MOUNT SOLID-STATE RELAY, 1 CHANNEL, M:HL048HD4.4

Input: DC.

Output: 240VAC 10Amp.

Input/control: 3-32VDC.

Connections: Screw Terminals.

Mech Mtg: panel.

Size: 1-3/4" wide x 2-1/4" deep x 7/8" high.

Optical Isolation Input to Output: 4,000 V

Turn-on Time: ½ cycle maximum

Turn-off Time: ½ cycle maximum

Operating Frequency: 25 to 65 Hz (operates at 400 Hz with six times off-state leakage)

Coupling Capacitance Input to Output: 8 pF maximum

DV/DT Off-state: 200 volts per microsecond

DV/DT Commutating: Snubbed for rated current at 0.5 power factor

More info: http://documents.opto22.com/0859_Solid_State_Relays_data_sheet.pdf

Proudly Made in USA

OMRON - G3VM-4NF - Relay, solid state. Mosfet SPST NO. SMD

Case/Package SMD/SMT

Mount Surface Mount

Number of Pins: Technical

Load Current: 150 mA

Output Current : 300 mA

Output Voltage: 400 V

Relay Type: Relay

Resistance: 12 Ω

Termination: Gull Wing

Throw Configuration: SPST

Dimensions: Height 3.65 mm

Length 7.12 mm

Width 6.4 mm

IR International Rectifier- P202 - W2BC25E - Module, SCR Bridge, Diode / SCR.

Dual diode 50 Amp/600 V

Diodes in bridge (-) path SCR's in bridge (+) paths.

AC input voltage: 240VAC.

3Vgt at 120mA Igt-max.

Package: MO-13.

Genuine International Rectifier (IR) - New Old Stock - Rare.

Note: Maybe Equivalent to NTE5700

Caution Always compare specification sheets when using substites/equivalents.

Time Mark - 261S120 - 98A00479-01 - Relay, Solid State.

The Model 261 series Alternating Relay is designed for duplex pumping systems where it is desirable to equalize pump run time. The solid-state alternating circuit drives an internal electromechanical relay. A continuous power source and control switch are required. The control switch (float, pressure or other isolated contact) is connected between the L1 terminal and the control terminal. Each time the control switch is opened the output contacts will change states. Indicator lights on the case show the internal relay status. On the optional toggle switch versions, the toggle switch is set to the ALTERNATE position. Setting the switch to Load 1 or Load 2 will lock the relay in position, preventing alternation.

Relay, solid state. Alternating. SP.

Current rating: 10Amp.

Control voltage: 120V AC/DC.

Enclosed. Base: 8 Octal. With Led(s).

Mount: Socket

Number of Pins: 8

Current Rating: 10 A

Termination: Plug

Voltage Rating (AC): 120 V

Approvals: CSA, UL

In Manufacturer's Packaging with Instructions

New

Relay, SSR. Output Rating 25 Amp, Maximum Line Voltage 140 VRMS, Minimum line voltage 24 Vrms, Control Voltage 90-280 VAC. Mounting: Screw, Dimensions 57.2 x 44.5 x 24.1 (Max) mm.  UPC 6949792115819

Douglas Randall - TDA25DM Relay, time delay.

Load: 124/240VAC 25Amp.

Panel Mount

Input: 90-140VAC.

Package: module/hockey puck.

New Old Stock

Made in the USA.

Douglas Randall - RDD Relay, Solid Stat Relay.

Output: 480VAC, RxxD.

Input: 0-10VDC.

Package: module/hockey puck.

Made in USA

Douglas Randall - RDA Relay, SSR.

Output: 210VAC, R.A.

Input: 0-10VDC.

Package: module/hockey puck.

Made in USA

Douglas Randall - K04A - NC Relay, Solid State.

Load: 32VDC 4Amp.

Input: 3-32VDC.

Package: module/hockey puck.

Made in USA

NSN 5945-01-090-5735

Output voltage 2-32 vdc; 4 amps; termination; control signal; two 0.138-32 in. screws and two 0.164-32 in. screws; 2.250 in. lg; 1.750 in. w; 1.030 in. h; two 0.172 in. dia mtg holes spaced 1.870 in. C to C

Douglas Randall - JD40D Relay, SSR.

Load: 480VAC 40Amp.

Input: 4-32VDC.

Package: module/hockey puck.

Made in the USA.

Additional Information: https://www.galco.com/techdoc/crdm/d4840_crdmh1.pdf

Douglas Randall - AO4A - NC Relay, Solid State Relay.

Load: 120VAC 4Amp.

Input: 90-280VAC.

Package: module/hockey puck.

Made in USA

NSN  5945-01-314-9657

Douglas Randall - A12B Relay, Solid State Relay.

Output: 240VAC 12Amp.

Input: 90-280VAC.

Package: module/hockey puck.

Made in USA

Douglas Randall - A04A Relay, Solid State Relay.

Output: 120VAC 4Amp.

Input: 90-280VAC.

Package: module/hockey puck.

Made in USA

NSN  5945-01-314-9657

Douglas Randall - CV1-NC - Relay, SSR.

Load: 3Amp 24-240VAC 60Hz.

Input: 4-10VDC.

Dimensions: 1.988" long x 1.244" wide x 0.663" high, with 4 solid leads.

CRYDOM - D1D12 Relay, Solid State Relay SSR.

SPST NO. Output: 100V 12Amp.

Current Rating: 12 A

Input Current: 28 mA

Isolation Voltage: 2.5 kV

Load Current: 12 A

Max Input Current: 28 mA

Max Input Voltage: 32 V

Operating Temperature: -20 to 80 °C

Max Output Current: 12 A

Max Output Voltage: 100 V

Max Supply Voltage (DC): 100 V

Max Surge Current: 28 A

Max Voltage Rating (DC): 100 V

Resistance: 130 mΩ

Termination: Screw

Throw Configuration: SPST

Voltage Rating (DC): 100 V

Dimensions: Depth 58.4 mm, Height 23 mm, Length 58.4 mm, Width 45.7 mm

Approvals: CE, UL, Lead Free      

REACH SVHC No SVHC, RoHS Compliant

Mount: Chassis, Hockey Puck.

CRYDOM - 10LPCV2425 Relay, SSR. SPST NO.

Load: 0.10-25Amp 0-10VDC.

Mount: Panel/Chassis.

Termination: 0.25" quick connect.

Package: Module.

More info: http://www.crydom.com/en/Tech/crydom_us.pdf

CRYDOM - H12WD4850 - Relay, SSR.

Circuit: SPST-NO (1 Form A).

Operating voltage: 480VAC.

Current: 50Amp.

Control voltage: 4-32V.

Output type: AC, zero cross.

Mount: Panel/Chassis.

Package: Hockey Puck.

Termination: screw.

New Old Stock

More info: http://www.crydom.com/en/Products/Catalog/h_12w.pdf