Solid State Relay

OPTO 22 - 240D3 SSR NEW 3-32VDC CONTROL

Input Current: 3 A

Isolation Voltage: 4 kV

Load Current: 3 A

Max Operating Temperature: 100 °C

Max Output Current: 3 A

Max Output Voltage: 240 V

Max Supply Voltage (AC): 280 V

Min Operating Temperature: -40 °C

Min Supply Voltage (AC): 24 V

Output Voltage: 280 V

Termination: Screw

Throw Configuration: SPST

Dimensions: Depth 19.6 mm, Height 19.6 mm, Length 44.5 mm, Width 57.2 mm

Compliance: CE, CSA, UL, Lead Free: Lead Free

REACH SVHC: No SVHC, RoHS: Compliant

OPTO 22 - G4IDC5 Relay, I/O.

Solid state relay.

10-32VDC 5VDC logic.

Number of digital inputs: 1.

Signal input type: 10 to 32VDC.

Number of outputs: 1.

More info: http://documents.opto22.com/0253_G4_Digital_DC_Inputs_data_sheet.pdf

OPTO 22 - 5136 MP177612677 - Relay, SSR, AC Switching.

The innovative use of room-temperature liquid epoxy encapsulation, coupled with Opto 22’s unique heat-spreader technology, are key to mass producing the world’s most reliable solid state relays.

Status: Discontinued

Input: 5V control.

Output: 10Amp 240VAC.

Connections: (4) 1/4" male QC terminals.

Mech Mtg: Chassis or PCB.

Alternates: Z240D10-7, Z240D10

New Old Stock

GRAYHILL - 70-OAC5  - I/O Module

2.5-10VDC Logic

140VAC 3.5Am

Standard, Digital Output AC,

VDC logic

SPST Normally Open

Zero crossing turn on

Used, Removed from Equipment

GRAYHILL - 70S2-01-A-05S - Relay, SSR.

Relay SSR 40mA 15V DC-IN 5A 60V DC-OUT 4-Pin

Input: DC. Contacts: SPST-NO.

Control: 3-15VDC.

Operating voltage: 3-60VDC.

Coil current: 5Amp.

Connections: screw.

Mech Mtg: Mount flange 2.2" (55.9mm) long, with 1.864" centers.

Size: 1.225" long x 1.019" wide x 0.860" high.

Note: Zero crossing.

Complete with hardware.

Rohs compliant.

TURCK - RSM RKM 57-0.5M/S630 - POWER CABLE

5 PIN POWER CABLE FOR TURCK SOLID STATE MODULE

• Cables that meet the requirements of the ODVA
• PLTC rated cable
• Available in thin, mid, and thick styles
• 7/8 and M12 connectors
• Rated up to 9 Amps and 600 Volts
• IP67/IP69K rated

TELEDYNE - 611-3054 - RELAY SSR Control

8-28VDC 10A 250VAC 50/60hz

As Removed /Tested

ELECTROL - S2264 - Relays, SSR.

Switches 240VAC 10Amp.

Only 5.5-12VDC-In Control Voltage.

New Stamped "Preconditioned" "E".

Hockey Puck Type

Dimensions: 57mm x 44mm x 35mm tall including screwed on 1/4" and 3/16" male stakons.

Listed: UL/CSA.

Alternates: Opto 22 Z240D10, 240SS10-04, D2410

WRC/Western Reserve Controls - WRC4-SWOAXSC-S3 Relay, SSR, I/O. Input: 24VDC. Output: 3Amp 120VAC, Replaceable fuse and toggle switch (On-Off-Auto) on top, Pin-outs: (1) input negative, (2) Logic Control Input (high-true), (3) logic positive, (4) Triac Output (5) Triac Output (fused side) Snubber on output (0.022uF/100 ohms). Plugs into standard, slim package I/O positions. Package: I/O, 5 pin inline.

ST Microelectronics - VN330SPTR-E Relay, SSR.

Quad high side smart power SSR.

Vcc: 36V.

Vcc / Vdemag: 55V.

0.7Amp.

RDS on: 0.32 Ohm.

Package: SO 10 SMD, exposed bottom pad.

Lead free.

RoHS compliant.

ABB SSAC - SIR2B6A4 - Solid State Control Relays

120VAC 90-150VAC/DC 6Amp

Zero-voltage switching for Resistive and Incadescent (extends the life up to ten times) Loads

Optically Isolated

Normally Open 3Amp or 6Amp when mounted on heatsink loads

Encapsulated

Code: 5190X

Connections: 1/4" Quick Connect Terminals w/ single hole mounting

Dimensions: 2" Square

Proudly Made in USA