Relays

TE Connectivity Potter & Brumfield AMF - JM2-106-21 Relay, Mercury.

Hermetically Sealed

Coil: 130/140 Ohm.

Electrical Configuration: DPDT-5A.

Contacts utilize standard bridging form D Make-before-Break.

Operating temperature range: -38C to +105degC.

Body: 1.5 x 4".

Connection: 8 pin octal.

UPC: 0780333840695

Proudly Made in USA

Alternate: Clare HG2A-1042-2A1 

Learn More

TE Connectivity Potter & Brumfield - KA4318 Relay

110VDC

Coil Resistance: 17K ohms 

Relay Configuration: 3PDT-5AMP

Terminals: 11-pin

Octal-type round

Plug-in

New Old Stock 

Proudly Made in USA

Learn More

OPTO 22 - G4OAC5MA  Relay, Solid State.

Control: 5V digital.

Current Rating: 3 A

Input Current: 12 mA

Operating Temperature: -30 to 70 °C

Operating Supply Voltage: 5 V

Output Current: 3 A

Output Voltage: 140 V

Throw Configuration: SPST

Turn-On Delay Time: 8.3ms

Dimensions: Depth 47.5 mm, Length 48.8 mm, Width 12.2 mm

Compliance: UL, RoHS Compliant

Load: 1.5A 12-140VAC with HOA / switch.

Learn More

Relays, A/D I/O. Signal input 4-20mA. 11-pin plug in module. Factory calibrated.Number of analog inputs: 1. Number of digital outputs: 1. Resolution: 12 bits. Module Input Impedance: 414 Ohms. Over/under current range:3 to 35 mA. Loop supply 28VDC nominal. Accuracy:16 �A Learn More

CROUSET GORDOS - OPTO 22 - IDC5BQ-256 Relays, SSR.

The IDC5BQ is a 4-channel DC digital input. It accepts input voltage of 4-16 VDC and uses 5 VDC logic. It is compatible with Opto 22 Optomux, Pamux, and Mistic protocol brain boards and mounting racks, as well as racks using a direct cable connection to a computer. The IDC5BQ module is a fast-switching input module for signals produced by photoelectric switches, encoders, DC proximity switches, or TTL devices.

Solid State Input Module

Quad, 5-32VDC input

Maximum output voltage, 30VDC.

Maximum output current 50mA.

Inputs and outputs are grouped in pairs and not totally isolated.

Plugs into standard quad-pak 14-pin I/O board positions.

New Old Stock

Learn More

Omron - G8H-UA-007001 Omron Automotive DC Relay, power.

Status: Discontinued

Input: DC.

Contacts: SPDT.

Contact Ratings: 20Amp (Designed for Heavy Load Automotive).

Coil Voltage: 12VDC.

Connections: male 0.25" and 0.187" QC terminals.

Mech Mtg: Panel/Plug-In, 5 Terminals, Any Orientation.

Packaging: Sealed

Operating Temperature: -40 C to 125 C

Dimensions: 0.881" long x 0.587" wide x 1.0" high.

Note 1 : Double marked 3568A21B (Chrysler).

Note 2: Automotive. OE usage in used in various Dodge, Chrylser, Jeep, Grand Cherokee, and Eagle and others. 

Alternate P/Ns, R-A153, 3568A21B, 04671167, 1211A12A, 3628A23D, 21911

Mechanical Life (Minimun): 10,000,000 Cycles(At Frequency of 18,000 Operations/Hour)

Electrical Life (Resistive Load): 100,000 Cyles (14V Continuous Carry Load)

Typical Applications: Blower Fan Motor, Head Lamps, Fuel Pump, ABS, Horn, Electric Sunroof, ABS, ATMs

Genuine Omron - Bulk Package from Manufacture - New Old Stock - Over 600 Sold

Proudly Made in USA

Learn More

OMRON - G8P-1114P-US-DC12 Relay, Control, General Purpose 1 Form A.

Status: Discontinued

Input: DC.

Contacts: SPST-NO.

Contact Ratings: 15Amp NO, 10Amp NC 125VAC.

Coil Voltage: 12VDC.

Contact Material: Silver Cadmium Oxide (AgCdO)

Connections: 2 Pin Control, plus 4 pins for mount.

Mech Mtg: PCB.

Packaging: Enclosed, Fully Sealed.

Size: Overall 1.268" long x 1.076" wide x 0.824" high.

Note: Listed UL/CSA.

Product:  Power Relays

Type:  Miniature

Relay Contact Form: 1 Form A (SPST-NO)

Contact Termination: Solder Pin

Mounting Style: Through Hole

Coil Type: Non-Latching

Coil Resistance:  720 Ohms

Coil Current: 16.7 mA

Contact Material: Silver Alloy (Ag)

Series: G6C

Contact Form: SPST (1 Form A)

Power Consumption: 200 mW

Brand: Omron Electronics

Product Type: General Purpose Relays

Subcategory: Relays

Alternates: TE Connectivity 1-1393209-2, T90S1D12-12, G6C1114PUSDC12NC, G6C1114PUS12DC, G6C1114PUSDC12, G6C1114PUSDC12

Learn More

OMRON - MHE6-UA-006012 Relay, Control.

Miniature General Purpose Relay

Input: DC.

Contacts: 6PDT.

Pins: 20

Contact Ratings: 2Amp.

Coil Voltage: 24-36VDC.

Coil Resistance: 1000 Ohm.

Connections: Gold plated, 3 rows 0.2" apart of 6 PC pins 3mm long - each pin 0.1" spacing, 2 pins at other end for coil.

Mech Mtg: PCB.

Packaging: Enclosed Transparent Case.

Genuine Omron - Vintage New OLd Stock

Made in Japan

Alternate: American Zettler AZ431-80-10L

Learn More

Panasonic / NAIS / Aromat - JV1E-12V - Relay, control. SPDT 10A 12VDC. Relay, control. Status: Discontinued, Input: DC. Contacts: SPDT. Contact Ratings: 10Amp. Coil Voltage: 12VDC (5A 1/10HP 277VAC, 10A 1/10HP 125VAC, 5A 30VDC, 0.3A 110VDC). Connections: 5 Pin Dip. Mech Mtg: PCB. Packaging: plastic enclosed. Size: 0.63 x 0.87 x 0.41" high. • Flat type: 16 mm (length) × 22 mm (width) × 10.9 mm (height), Weight: 0.3 ounce. Note: Listed: UL/CSA. Learn More

MATSUSHITA - VC20-1A-AC24V-K Relay, Power.

Input: AC.

Contacts: SPST Normally Open.

Contact Ratings: 120VAC: 20A resistive, 12A tungsten, 1 HP motor.

Coil Voltage: 24 VAC.

Coil Current: 200 mA.

Connections: 0.250" Quick connects.

Mech Mtg: Snap-on mounting bracket.

Packaging: Black plastic housing. Size: 2" x 1-1/8" x 2".

Weight: 6 oz.

Note: UL & CSA listed.

Learn More

Relay, time delay. Contactor: 240VAC 10A. Coil: 24VDC. Connection: Octal. Electrical conf: DPDT. Body: 1.75 x 2.4 x 3.6" above socket. Weight: 5 oz. Time delay: 0.1 sec - 2 hrs. 16-Ranges via four top-mounted DIP switches. Min/max Control pot on top. Upon application of the control voltage (24) the relay contacts transfer for the preset time, then switch back. Input voltage must be removed and reapplied to reset the time delay . Learn More

Relay, power. Input: DC. Contacts: 3PDT. Contact Ratings: 11Amp. Coil Voltage: 110VDC (120VAC/28VDC, 11A 240Vac UL, 6A 240VAC CSA, 1/3HP 120VAC, 1/2HP 240VAC). Connections: 3/16" male QC terminals, socket or solder. Mech Mtg: PCB or socket. Packaging: Plastic enclosed. Note: Made in the USA. Learn More

Relay, control. Input: DC. Contacts: 2 (NC) 1 (NO) 1 (SPST). Contact Ratings: 10Amp. Coil Voltage: 125VDC. Coil Current: 20 mA (latch) /15mA (reset). Coil Resistance: 6250 Ohms (latch) /8400 Ohms (reset). Pickup/Dropout: Maximum pick-up 100VDC. Connections: 12 Pin base Plug-In. Packaging: Enclosed. Note: B255 Series, 219 style, 2 Coil latching. Factory new, each NIB. Made in the USA. Coil marked 45570-43C. Learn More

MAGNECRAFT/S&D - A314XCX48P-125D Relay, Power.

Status: Discontinued

Input: DC, General Purpose

Contacts: 3PDT.

Contact Ratings: 10Amp.

Coil Voltage: 125VDC.

Coil Resistance: 1K Ohm.

Connections: 11 octal plug-in.

Packaging: Enclosed.

Note: (10Amp 120VAC, 10Amp 240VAC, 1/3HP 120V, 1/2HP 240V, 10Amp 28VDC).

Alternate: KRPA14DG-125, KRPA14GF-125D

New Old Stock

Learn More

Relay, control. Input: AC. Contacts: 4PDT. Contact Ratings: 1Amp. Coil Voltage: 24VAC (1Amp 120/240VAC, 30VDC). Connections: solder terminals. Mech Mtg: PCB. Packaging: Hermetically sealed case. Note: Contacts: Bifurcated. Qualified for Class 1, Division 2 hazardous locations. NIB. Learn More

Relay, control. Input: AC. Contacts: 4PDT. Contact Ratings: 1Amp. Coil Voltage: 240VAC (1Amp 120/240VAC, 30VDC). Connections: solder terminals. Mech Mtg: PCB. Packaging: Hermetically sealed case. Note: Contacts: Bifurcated. Qualified for Class 1, Division 2 hazardous locations. NIB. Learn More

Relay, control. Input: DC. Contacts: 4PDT. Contact Ratings: 1Amp. Coil Voltage: 12VDC (1Amp 120/240VAC, 30VDC). Connections: solder terminals. Mech Mtg: PCB. Packaging: Hermetically sealed case. Note: Contacts: Bifurcated. Qualified for Class 1, Division 2 hazardous locations. NIB. Learn More

Scheider Electric / Magnecraft / Struthers and Dunn - W389ACX4 - 298XAXC1-120A - Relay, Control, AC.

Status: Discontinued

Contacts: SPDT.

Contact Ratings: 13A/28 VDC, 20A/15VDC, 5A/300VAC, 20A/277VAC Ballast.

Coil Voltage: 120VAC.

Coil Resistance: 1700 Ohm.

Connections: 1/4" (0,25") Quick Connect or Socket.

AC Operated Flange Mount,

Packaging: Transparent Thermoplastic Housing.

Size: 1-1/2" x 1-3/8" x 2-1/4", (38.8x35.5x73.8)mm.

Note: Double marked 298XAXC1-120A.

Alternates: 298XAXC1-120A, 81F1284, 389ACX-4

Applications: Industrial, Commericial, Thermador Range Relay

New Old Stock - Difficult Relay to Find New

Learn More

MAGNECRAFT/S&D - W388X-2 - Relay

General Purpose Relay

Coil Ratings: 12VDC/120 Ohm 

Contacts: SPDT-10A, NO & NC Contacts 

Open Frame Construction.

mount: Plug-In or Solder

Five 0.187" (3/16") 4.76mm Quick Connect Terminals

Base Footprint Dimensions: 1.422" x  1.276"   (36.13 mm x 32.41 mm)

Overall Height Dimension: 1.964" (49.88 mm)

Tapped 6/32 Mounting Hole w/Locating Pin

Weight: 2 oz

UPC 616880108431

Similar Relay: R04-5A30-12

Genuine Magnecraft - New Old stock

Made in USA and Assembled in Mexico

RoHs Compliant

 

Learn More

HERMETICALLY SEALED with 8 solder eyehooks coming out of the glass seal. DPDT-10A 28VDC 240-ohm coil Two holes on mounting flange 36mm apart. Board mount 29mm hole - 27mm above board. 1.07" Diameter Learn More

LEACH - MS27401-25 Relay, Control, DC.

Contacts: DPDT.

Contact Ratings: 10Amp 28VDC or 115/200VAC 400Hz.

Coil Voltage: 28VDC.

Connections: solder hook, soldered.

Mech Mtg: panel mount 1-1/3" centers.

Packaging: hermetically sealed.

Note: Dimensions: 1" wide x 1/2" deep x 1" high.

Double marked J-2DN-103.

NSN: 5945-01-207-6456 

Military, Used/RFE/Removed from equipment.

Learn More

LEACH / Struthers Dunn - 1127BFW CX3190B - Relays, DC Control.

12VDC 2-coil Latching relay

 DPDT-16VDC 6Amp contacts.

Switchboard relays

12VDC at 1.3Amp.

Mount: Open Frame, on a bakelite base

Approximate Dimensions: 3-1/2" x 1-7/8".

Vintage Genuine Struthers Dunn - New Old Stock

Proudly Made in USA

Weighs 7-oz.

Learn More

Relay, DC. Midtex, 156-14F100 4PDT 110VDC relay inside octal housing. Special relay manufactured for The University Of Alaska. Labeled: Graphic/Alarmlite 108-4/110VDC. Mount: 8 Octal plug-in. Color: black. More info: http://facilities.alaska.edu/uaf/fsinfo/0record/FS248-/FS413-FS413-12-MECH-Johnson-GraphicAnnunc-1984-FS413-BLU-MECH-011-00-1984.pdf Learn More

GORDOS/CROUZET - IDC5Q - Relay, DC. 4 Channel 10-32 VDC, 5 VDC Logic I/O Module, Plug-in.

The IDC5Q is a 4-channel I/O Module contains the equivalent of four single-channel I/O circuits in a single high-density package. Each Quad Pak module can be divided into two pairs with each pair sharing a common connection. The Quad Pak modules are designed to plug into the Quad Pak high-density I/O mounting racks only and cannot be plugged into single-channel racks. Quad Pak modules are designed to work with a 5 VDC logic voltage only and can be used with Optomux, Pamux and Mistic protocol brain boards and mounting racks, as well as racks using a direct cable connection to a computer. DC input modules are used for sensing ON/OFF DC voltage levels.

Relay, I/O. 4-channel DC Input 10-32 VDC, 5 VDC Logic. Digital Module.

SOLID STATE RELAYS - IDC SERIES

10-32VDC

50MA

5VDC SUPPLY

-30 TO 70 DEGREE C

29MA INPUT

4000VAC ISOLATION

4 CHANNELS

5 PIN

I/O MOUNTING BOARD

Learn More