Relays

Schneider Electric - Square D - 750-D150-G1 - ETO123R Relay, Overload.

Dashpot Magnetic Current Relay, Manual Rreset.

Form HR 1

Class-9055, type-ETO123R form-HRY-35. Type 'E' overload relay, dashpot, heavy current.

"Remove dashpot from relay, leaving plunger and piston assembly in dashpot.

Fill 2/3 full with class 9055, Type R11 dashpot oil, to insure proper operation use. Only this special silicon oil." (not included) About 6 x 4 x 6"high.

New Old Stock

Learn More

Square D - 8501 - KUD13M1P14V53 - Plug-In Control Relay - 11 Blade Plug-in - 3 Poles - 24VDC coil - Pilot Light 

Status: Discontinued

Input: DC. Contacts: 3PDT.

Contact Ratings: 10Amp.

Coil Voltage: 24VDC (10Amp 120VAC, 6-2/3 HP 240VAC, 10Amp 28VDC, 1/2 HP 250VAC).

Connections: male 3/16" QC terminals.

Mech Mtg: PCB or Panel.

Packaging: Plastic Enclosed.

Note: Press to test.

Class 8501. 6.4 Ounces

Series C. UL - Use with NR82 Socket, not included

 

Learn More

48VDC 34-Pole DoubleThrow New Relays- Telephone RELAY redundant precious metal contacts, twisted-wire terminal leads - 600-Ohm coil - about 3"x3"x4.5" in clear plastic case - Really expensive & pretty Learn More

Square D - Schneider Electric - NAX10 - Auxilary Contacts Normally Open

Inner Position SPDT, 600VAC, 30/60A

Used with Class-9421 Type N Disconnect Switches Series-A 

MANUF IN ENGLAND

UPC 10785901138577

New Old Stock

UL CSA

Learn More

Overload Relay Thermal Unit assembly - NEW - CU 80 Learn More

Relay, AC. Contactor: 15A. Coil: 110/120VAC. Electrical conf: 8P NO. Body: 12 x 4 W x 3.8"H. Latching. Coils: 186x S1 830A and S1681 S1 R30A 120VAC Class 8500 Type BHO-80 Series A. Alt P/N: 4449-91 223089OT. Learn More

Solid State Relay, Older hybrid design, uses a reed switch relay as isolated switch to activate a random turn-on triac. Nominal 5VDC input and 120VAC output. 1/4-inch quick connect terminals, blue plastic housing, not encapsulated. Current carrying range estimated at 6A resistive, No internal RC snubbers for inductive loads. Learn More

New, in box. Learn More

24VDC Coil 5P N.O. Contact 1.1A 120DC/ 0.2A 240DC/600DCNema A600 A.C. open frame. Learn More

Square D - 2245-S3-G1 - Relay, Power.

Electro-magnetic relay with a wire coil, surrounded by an iron core. A path of very low reluctance for the magnetic flux is provided for the movable armature and also the switch point contacts.  The movable armature is connected to the yoke which is mechanically connected to the switch point contacts. These parts are safely held with the help of a spring. The spring is used so as to produce an air gap in the circuit when the relay becomes de-energized.

Status: Discontinued Vintage 

Industrial Heavy Duty with Resistor

Input: DC.

Contacts: SPST NO.

Contact Ratings: 30Amp.

Coil Voltage: 6VDC.

Mech Mtg: Panel, Open Frame.

Connections: Copper Stud Terminals

Size: Overall with mount 3" long x 3.3" wide x 2.037" high.

Mount Feet Approximately 2.285" on center.

Note: Used/Removed from equipment.

Contacts may have visible oxidation that does not affect Operation.

Can Also be disassembled and used as a Heavy Duty 6 VDC Solenoid.

Simple Durable Design - Proudly Made in USA.

Learn More

Square D - 8536SCO3 - AC Magnetic Starter, NEMA Size 1.

Class 8536SCO3 magnetic starters are used for full voltage starting and stopping AC squirrel cage motors. Motor overload protection is provided by melting alloy type thermal overload relays. Class 8536SC0 starters are available in NEMA Sizes 00-7. Type S starters are designed for operation at 600 Volts AC, 50-60 Hertz.

These Square D starters from NEMA size 00-6 are provided with a melting alloy thermal overload relay as standard. Interchangeable thermal units are available in standard trip (Class 20) Sizes 00-6, quick trip (Class 10) Sizes 00-4, and slow trip (Class 30) Sizes 00-3. Single-phase starters use one thermal unit, 3-phase starters use three thermal units.

Square D 8536SCO3 Ser. A NEMA Size 1 3-pole starter rated at 27 AMPS with an AC rated coil.

Rated for 7.5 H.P. @ 230 volt / 10 H.P. @ 460 volt 3 Phase and Form S separate control when a separate source of power is available for the control (coil) voltage.

Note: ALT P/N: 84511.

Note: In Manufactuer's Packaging with Documentation

Factory New

Learn More

Square D - 8501 Type HO-60 - Series B Latching Relay, 120VAC Coil, 6 Pole, NEMA A600, New.

Class 8501 Type HO-60

Coil Rating: 120VAC @ 60Hz / 110VAS @ 50Hz.

Conatct Material: Silver

6 Normally Open Contacts can easily be changed from Normally Open to Normally Closed

AC Voltage 120-600, Make: 7200VA, Break: 720VA, Continuous: 10A

Max. Carry Amperes: 15

Mount: Panel Mount

80030

New Old Stock

Listed: UL/CSA.

Proudly Made in USA

Learn More

Square D - 8501 Type H1R - Series A Latching Relay, 120VAC, 8 Pole, NEMA A600.

Class 8501 Type H1-R

Coil Rating: 120VAC @ 60Hz / 110VAS @ 50Hz.

Conatct Material: Silver

8 Normally Open Contacts can easily be changed from Normally Open to Normally Closed

120 to600V, Make 7200VA, Break 720VA, Continuous: 10A

Mount: Panel Mount

79302

New Old Stock

Listed: UL/CSA.

Proudly Made in USA

Learn More

Square D - 8502SAO11V02 - Magnetic Contactor.

NEMA Contactor, Type S

Nonreversing

Size 00

9A, 1 HP at 230 VAC, 1 phase, up to 100 kA

2 pole, 120VAC-60Hz / 110VAC-50Hz coil

Made in the USA.

New

Learn More

Square D - 9999PN01 - Contactors. Auxiliary Contact Block

Square D by Schneider Electric

Status: Discontinued

1 NC

Current/Voltage Ratings: 12Amp 660VAC.

New Old Stock

Learn More

Square D - 9065SEO5 Thermal Overload Relay.

Status: Discontinued

Melting Alloy, 600V 26Amp.

Nema Size 1, Three Pole.

Series A/Class 9065/Type S.

Open Frame.

Factory New

Listed: UL/CSA.

Learn More

AC Magnetic NEMA Size 1 Contactor. Series A. Note: ALT P/N: 86290. Learn More

Square D - 8502PE5.10E - Contactor.

Status: Discontinued

3 Pole 3 Phase 8502PE5.00E and 8502PE5.10E.

Current Rating: 12 Amp

1 NO Contact

Approvals: UL, CSA

Factory New

Learn More

Square D - 8501RSD14 Relay, Control.

Input: DC.

Contacts: 4PDT.

Contact Ratings: (5Amp 120VAC / 5Amp 28VDC (1/10Hp, 120/240Vac).

Coil Voltage: 12VDC.

Mech Mtg: Panel, Enclosed Plastic ice-Cube, plug-in.

Note: Class 8501.

Series B.

Use with socket NR44 or NR45.

Alternate: 8501RSD14V51

 

Learn More

Square D - KP13P14V14 - Relay, Power.

Status: Discontinued Januray 2021

Input: AC.

Contacts: 3PDT.

Contact Ratings: 10Amp.

Mounting: Socket

Coil Voltage: 24VAC 50/60Hz (10Amp 120VAC/ 6A 250V/1/3HP 250V/1/6HP 120V).

Mech Mtg: 11 Octal.

Packaging: Enclosed plug in.

Note: Class: 8501.

Series D. Ice Cube

Learn More

Square D - 9065TF22 - Relay, Thermal Overload. Series A.

Square D by Schnieder Electric

Status: Discontinued

Current: 22-31 Amps

3 Pole, Class 10

New Old Stock

Made in Germany

Learn More

Square D - 9065TE8 - Relay, Thermal Overload. Series A.

Square D by Schneider Electric

Status: Discontinued

Current: 8-11.5 Amps

Termination: 4 Blade 

New Old Stock 

 

 

Learn More

Square D - 9065TE16 - Relay, Thermal Overload.

Square D by Schneider Electric

Status: Discontinued

Current: 16-21Amp

New Old Stock

Learn More

Square D - 9065TD3.7 - Relay, Thermal Overload.

Square D by Schneider ELectric

Status: Discontinued

3.7 - 5.5 Amps

660 VAC

Type TD/TE

New Old Stock

Learn More