Relays

ISSC - Kanson Electronics - 1014-1-K-1-B - On delay 0.5~100Sec 10Amp 115VAC.

Relays, time delay.

On delay 0.5~100Sec 10Amp 115VAC,

Instant Contacts: 2-NO and 1-NC,

Timed contacts: 2-NO and 1-NC.

Case: 71 x 74 x 170mm high.

ISSC - Kanson Electronics - 1230-1-D-C - Industrial Solid State Resistance Detector.

Input

Voltage: 90 to 140VAC

Frequency: 50/60 Hz

Power Consumption: 20 mA

Transient Protection: Transformer

Output

Type: N.O. Triac (optically isolated, 1500 Vrms)

Rating: 1.0A rms max continuous15A inrush (16 msec @ 60Hz)

Physical

Operating Temp: -25° to 70° C (-13° to 160° F)

Mounting: Plug-in

Termination: 8 pin socket

Housing: Plastic

NIB, with Manufactures Specification Sheet.

ISSC/Kanson Electronics - 1014-1-D-2-A - Relay, Time Delay.

Instant Contacts simplify the timing control circuit. A separate relay, which operates in conjunction with the input power switch or control device, can be used to operate a separate control function. Timing function controls the timing relay. AC Control Circuit is compatible with both standard mechanical switches and solid-state proximity sensors.

Timing Function: Off delay.

Timing Range: 0.06 - 1.0 second, range 92727.

Note: BUL 1014. Input: 120VAC 50/60Hz +/-15% 10VA.

Transient protection: Isolation transformer.

Output: Two electromechanical relays.

Ratings: 10Amp 240VAC.

Output: Instant relay 1 SPDT. Timed relay 1 SPDT, 1 NO.

Factory New

Complete with manufactures specification sheet.

ISSC/Kanson Electronics - 1013-1-G-2-B - Relay, Time Delay.

Input: AC.

Contacts: 1 NO, 1 NC.

Coil Voltage: 115VAC 50/60Hz.

Timing Function: Off delay.

Timing Range: 0.06 - 10.0 second, range 93446.

Note: Output: 10Amp, 1/3HP 125/250VAC.

NIB, with manufactures specification sheet.

ISSC/Kanson Electronics - 1013-1-B-4-B1 - Relay, Timer.

Mech Mtg: Panel/Chassis.

Packaging: Enclosed.

Timing Range: 0.6 to 0.25 seconds.

Note: Input: 120VAC.

Output: 10Amp 1/3HP 125, 250VAC.

Pulsed interval.

Relay: 2NO.

NIB with manufactures specification sheet.

Made in USA

ISSC/Kanson Electronics - 1014-1-H-2-B - Relays, Time Delay.

The 1014 Model features instant contacts that simplify the timing control circuit. A separate relay, which operates in conjunction with the input power switch or control device, can be used to operate a separate control function. Timing function controls the timing relay. AC Control Circuit is compatible with both standard mechanical switches and solid-state proximity sensors.

Off Delay 0.06-25 seconds.

Bulletin 1014.

In: 115V 50/60

Output contacts: 115V 10A SPDT and NO, instant contacts 10A SPDT and NO timed contacts.

Case: 13 terminal board screw contacts, 2.9" square x 7" tall, screwdriver pot time adjust.