Timers & Counters

INDUSTRIAL TIMER CORP - CH1-M - Timers.

Electromechanical hour meter. 115VAC 50CY.

Time Range: 1second to 60seconds.

Reset Time: 0.5s.

Time Range Max: 60s.

Will operate form 100 to 130VAC.

Mount: panel mount for 3" hole.

Four 5-40 tapped holes, must be provided.

RoHS compliant.

Made in USA - Diffficult Item to find New.

More info: http://www.industrialtimercompany.com/DlyTmrs.htm

Learn More

Durant / Eaton - 5-T-8-1-AC - Lineal Counter Ratio 1.5:1 w/ Reset

Eaton's mechanical totalizers are available in a variety of heavy-duty configurations for applications when power is unavailable.

Accurate counting without need for power

5-Digit Lineal Counter, Ratio 1.5:1 with Thumbscrew Reset.

Black digits with white background

Dual shaft, top and bottom.

Base mount

UPC:782114011522

Dimensions: Height: 1.875 IN, Length: 3.375 IN, Width: 3.6875 IN

Weight:.5 LB

 

New

Learn More

9-pin D sub Extension cable Learn More

EATON DURANT - 57201-420 - Ambassador Series Batch Totalizer Productivity Monitor, 115VAC.

Display monitor with auto reason inputs.

Counter productivity monitor, 115VAC.

New with Manufacturers Instructions

Learn More

Counter. 6 Digit 12VDC 3 Watt. Non-resettable. Used/Removed from equipment. Learn More

Eaton - 366-101-30 - Motor Drive Timer.

Power: 115VAC

0-10 Minutes

1/11.25 RPM CCW

Contact Rating: 5A @ 120VAC

3 Watts

Connections: 0.250 Quick Connect Spade Terminal

3 watt and has a SPST NO 5Amp 125VAC Micro Switch.

Size: 2 5/8" x 2" X 2 5/8"

New Old Stock

Learn More

Timer. 60 Second, 0.01 Second increments. Face: 3" D. Motor and clutch: 28VDC. Enclosed. Mount: panel, 4 holes with 3.5" centers. Dimensions: 3.1" square x 4.524" behind panel. Good condition. Learn More

Timer. 60 Second, 0.01 Second increments. Face: 3" D. Motor and clutch: 28VDC. Enclosed. Mount: panel, 4 holes with 3.5" centers. Dimensions: 3.1" square x 4.524" behind panel. Good condition. Learn More

CRAMER - 632E-A20S Meter, Hour.

4 Hour digits plus 1 tenths.

50 Cycle, 120VAC or 115VAC

Elapsed time. 9999.9 Hour.

Non-resettable.

Mount: 2.5" hole.

Body Diameter: 2.203"

Mounting Flange Width: 2.969" 

Body Depth: 2.850"

Mounting Method: Semiflush

Note: Cramer / Giannini Controls Corp.

NSN 6645-01-361-8947

Made in the USA.

New

Learn More

Panasonic - Aromat - Matsushita - LC48P-T6B24-240V Counter.

6 Digit Preset Electronic.

100 Counts/Second.

Input: 24-240V AC/DC.

Load: 100mA max. 30VDC.

Mount: Panel, 44.5mm square, 8 pin octal.

Complete with Manufactures Operating Instructions.

New in Manufacturer's Packaging.

Learn More

ACTION INSTRUMENTS INC - V437-2000-1.

Pulse input rate/totalizer.

Flow, rate, speed indication, totalization, peak detect and alarming, including preset tracking for container fill applications.

Pulse or square wave, TTL, open collector or contact closure, 125mVpp to 120V amplitudes.

Visipak - Action's VisiPak indicators are a reliable, cost effective solution for displaying virtually any sensor or process variable. All VisiPak indicators have NEMA 4 or higher front panel ratings and a variety of agency approvals. 

Field Configurable Input

NEMA 4X Front Panel

4 Visual Alarm Points with Front Panel LED Status

Wide Ranging Display

Frequency Input: 0/999999 display.Pulse Input Rate/Totalizer

Isolated 4-20mA output (external power needed) for analog indicators.

Factory New complete with manufactures instruction manual.

Proudly Made in USA

Learn More

TERMINAL BLOCK ADAPTER MODULE for MITE-series Learn More

Counter. 4 Digit x 8 position, assembly. The coils pull in between 8-15VDC. Metal frame/Steel bracket 14" long x 1-1/8"wide x 2-1/2" high. Learn More

Solid State Delay On Make Timing Module Learn More

SSAC - TSD2425 - Solid State Digi-Timer

Timing Module Interval (Single Pulse on Operate)

UPC:  804325042055

Brand: SSAC

Subcategory: Time Delay

Series: TSD2

Mode of Operation: Interval

Timing Range: 10 Minutes~1000 Minutes

Coil Voltage: 120 VAC

Mounting Type: Surface

Contact Rating (A): 1 Amps

Contacts: 1NO

Termination:0.250 in Flat Blade

Time Range Adjustment: Remote

Max Time: 1000 Minutes

Time Tolerance: 1 Percent

Approvals: CSA; CE; UL

H x W x D:2 in x 2 in x 1.21 in

Net Weight:2.4 oz

120VAC External Adjust

Learn More

REDINGTON - V8-4816 - Counter. 6 Digit, 24VDC.

Electromechanical. 1200 Counts/Min.

Mount: Panel, 4 hole.

22-2C Wire.

Dimensions: 1.63" wide x 1.0" high x 2.25" deep plus mount flange 1.625" wide x 2.36" high x 0.20" thick.

New Old Stock

Learn More

The ST71A is a plug-in timer which provides a 7, 10, 30, 60, or 90 second fixed prepurge timer period at the start of each R4795 cycle.PLUG-IN PURGE TIMER FIXED 7 SEC. TIMING FOR USE WITH R4795.(CIRCUIT BOARD) WITH SPEC'S. Learn More

Replacement Drive for Chart Recorders - Spring Wound - with KEY1 REV/DAY - Seven (7) day wind - 24 Hour Chart, 4.5"round x 3"deep overall - Impossible to find today! Learn More

EAGLE SIGNAL / DANAHER - 191-11B601 B82 - 0-8 HOUR TIMER

For over 70 years, Eagle Signal has been the leading supplier of timer solutions for a range of industrial applications all over the world.The Model 191 is a push-button start, motor driven timer with cycle progress pointer, double make-double break snap action switch and is used to energize a load for a preset time period. The pushbutton is located in the center of the time set pointer knob on the panel mounted dial. When depressed momentarily, a mechanical latch and switch is engaged, starting the motor and timing period. After completion of timing, switch 3 and 4 open, 1 and 2 close, motor stops, and timer resets to setpoint. Timer is now ready for another timing operation.

Voltage: 120/240VAC 60Hz, 1/2hP 125VAC, 3/4HP 250VAC 

Current Rating: 10A

Repeat Accuracy: 1.5% of Full Scale

Termination: Motor - Loose Leads, 20 Ga., 6" long stripped 5/8"

Termination Switch: .188 x .250 x .020 Quick Connect Tabs

LR27967

PUSH BUTTON AUTO-RESET TIMERDANAHER 

GW-EAGLE SIGNAL INDUSTRIAL CONTROLS

Approvals: UL, CSA

Made in USA

Manufacturer's Specification In Package.

New Old Stock

Learn More

0-999999 Second Tme Totalizer - NEW - panel mount 120v/60 (277.78 hours)Panel Mount - with spex Learn More

0-15 SECOND PANEL MOUNT RESET TIMER - 120VAC 60Hz - NEW DANAHER CONTROLS Reverse Clutch = OFF Delay, WITH SPEC SHEET IN BOX Learn More

240V 50-or-60HZ RESET TIMER 0-60 Seconds MINIMUM SETTING - 3% OF FULL SCALE - FM(FACTORY MUTAL) APPROVED - SYNCHRONOUS MOTOR DRIVEN 10Amp Contacts - 9 POSITION TERMINAL BLOCK Learn More

8 Digit Resetable Counter.One input for voltage counting level of 48-240vac and or one input for 5 to 50 V AC/DC. Counting speed is 40 Hz max. For sinking or sourcing use 5-50vdc.Unit has one lithium battery inside which says should last up to 8 years. Learn More

Timer, mechanical. 0-60 Second. Type: NO 115VAC 10Amp, 230VAC 5Amp. Dimensions: 3.5 x 4 x 3" deep. Contacts: 10 terminal/lugs on top. Rear of unit has 4 operating diagrams; Before start, During cycle, End of cycle and Switch operation. Note: Manufacture: Automatic Timing and Controls Inc. Made in the USA. Learn More