Hydraulic & Pneumatic

Norgren Fluidics - 5VS-011 - Low Pressure Drop Indicator.

Provides a visual indication of level of pressure drop across units. Provides indication of condition of filter elements. Domed lens gives wide angle of visibility. Enable pressure drop in various parts of the system to be monitored.

10-32 female unf bottom rotowink pressure indicator

As Removed 

Learn More

Valve, Pnuematic Shut-Off. 3/4"NPT. Label on the box implies the pneumatic control is heated. Overall Size: 4.25"D x 8.5"L. Weight 11.4 lbs unpacked. TKT1485 Learn More

HYSON - T2B-3000X0.5 XB - Compact Height Nitrogen Gas Spring

HYSON gas springs are highly specified for use in metal stamping dies, injection molds and custom machines. 

• Life in excess of 100,000 stroke meters.
• Cartridge design for easy maintenance.
• Oil pipe prevents oil leaving the springs in a hosed system and helps maintain life of the springs.
• Secondary piston retaining ring offers extra protection.
• Compact height reduces die costs.

Cylinder 2175-PSI 

Stroke Length: 12.7mm (0.5")

Max 150-bar at 15-degrees C.

Gas N2 Nitrogen only.

Dimensions: Diameter 95.2mm, Height Min, 114.2mm, Full Stroke 127mm High

Weight 12 lbs.

KIT #HT2SK-3000

Additional Information: https://www.ajacs.com/metal-forming-catalog/hyson/nitrogen-gas-springs/113-t2-b-series/file

Made in Sweden

Factory New

Learn More

Pneumatic Temperature Sensor +25-to-125F [ -5-to-+55C ] 2=Inactive device. Pneumatic Temperature Sensors are direct acting, proportional-type for use with a pneumatic controller in HVAC systems to control valves and dampers. The LP914A has a rod and tube insertion element for duct-,well-, or through-the-wall-mounting Learn More

-40-to+240F -5-to+115C Pneumatic Temperature Sensors are direct acting, proportional-type for use with a pneumatic controller in HVAC systems to control valves and dampers. The LP914A has a rod and tube insertion element for duct-,well-, or through-the-wall-mounting Learn More

Compressed gas regulator UL-650L max inlet 150psi and 0-60psi / 0-400kPa USG gage. 2.5 lbs. Learn More

Position Feedback Cylinder LRT CONTROLLER. Input:120VAC Scalable Output: 4-20mA. With 24-page instruction manual. Learn More

AMETEK USG - SPEC. No. 45764 - Meters & Gauges, P500 Series.

AMETEK U.S. Gauge is one of the world's leading suppliers of high quality, competitively priced pressure gauges. The Model P500 is a general purpose commercial gauge measuring vacuum pressure, gauge pressure, or compound gauge pressure. These bourdon tube pressure gauges have phosphor bronze or beryllium copper tubes, with brass sockets. The case is black painted steel for durability. 

Pressure Gauge

Size: 2 Inch. Diameter

Type: Bottom Stem

Scale 0-60PSI.

Inlet Fitting: 1/4"LM

Alternate: 16326

Proudly Made in USA

Learn More

Millennium-Filters MN-HP59NL1925MV HY-PRO Hydraulic Filter, Direct Interchange. 

Millennium-Filters hydraulic cartridges are built to provide superior protection from particles and contamination that can result in inefficiency, downtime. Proper fluid cleanliness levels are critical for components in the hydraulic fluid stream. Types of filtration media used depend on the application. Millennium Filters use microglass media, stainless steel mesh, or paper media. Micron ratings range from 250 microns down to 1 micron. These hydraulic cartridges are essential in reducing operating expenses.

Body Material: Pleated Microglass Media

Brand Name: Millennium-Filters

Item Shape: Round

Length: 19.5 inches

Temperature Rating: -13 degrees fahrenheit to 250 degrees fahrenheit

Material: Pleated Microglass Media

Maximum Pressure: 435 pounds_per_square_inch

Maximum Working Pressure: 435 pounds_per_square_inch

Measurement System: Inch

Model Number: MN-HP59NL1925MV

Part Number: MN-HP59NL1925MV

Particle Retention Size: 20 µm

Seal Material Type: Viton

UNSPSC Code: 40161500

Width: 3 inches

Package Dimensions : 20.4 x 4.3 x 4.2 inches; 4.55 Pounds

Alternate: WIX D56B20EV Direct Interchange

Applications: Hydraulic Fluids, Construction Equipment, Hydraulic System Filter Housings, Hydraulic Circuits, Fluid Contaminants, Hydraulic Maintenance, Hydraulic Components, Hydraulic Fluid Contamination Control, Donaldson Hydraulics, Parker Hydraulics, Pall Hydraulics, Hydac, Schroeder, Eaton Vickers, Mahle, Fleetguard Cummins, Purolator Facet.

Learn More

Cylinder, air. Stroke 4", 145PSI-max. Dimensions: 1.78 x 1.95 x 6.4" long including 0.54"D threaded shaft. Weight: 2 lbs. More info: http://www.coastpneumatics.com/metric/cylinders/cq2_series_cylinders.pdf Learn More

Actuator, 150 PSI 10 BAR 1.0MPA. Weight: 10 lbs More info: http://www.rciactuators.com/documents/7256_RCI200_DIMENSIONAL_DATA.PDF Learn More

PARKER - Hydraulic Div - 01.50 CJ2HLTV14AC 5.000 - Hydraulic. Exclusive with the Parker Stepped Cushion for increased performance and productivity ■ Faster cycle time ■ Reduced hydraulic shock ■ Reduced machine noise ■ Lower machine maintenance. . Patented “Jewel” rod gland for longer life and lower operating costs. Chromeplated, case hardened piston rods. Rod end studs of high yield-strength steel, with rolled threads for added strength. Tie rods with rolled threads and steel nuts. Floating cushions with float-check action and positive metal-to-metal seal. Hydraulic. Series 2H Cylinder Division. Tie Rod Cylinder Bore: 1.50” Stroke: 5.00” Envelope Pressure: 3000-PSI Hydraulic. Life: — Over Millions of trouble-free cycles Factory New - Made in Canada https://www.parker.com/literature/Industrial%20Cylinder/cylinder/cat/english/0106b003.pdf Learn More

PARKER HANNIFIN - Hydraulic Filter Division - 932340Q 10QYM

Hydraulic Filtration Element 3.10" OD x 8.10" Length.

inner Diameter: 1.690"

Filter Type: Pleated Synthetic Elements

Filtration Selectivity Raring: 12 MICRON ABSOLUTE (B12=200)

Maximum Flow: 60 GPM

Operating Temperature Range: -45 TO 225 F

Initial Differential Pressure: 6 PSID

Center Tube: ZINC PLATED CARBON STEEL

End Caps: CARBON STEEL

Hydraulic Filter Div of Parker Hannifin in Metamora OH.

Proudly Made in USA

Alternates: P 031081-3S61, Luber-Finer LH95105V, Carquest 84852

Learn More

PARKER - CPOM3DDN – Hydraulic Pilot Operated Check Valve. Size: 3 - NFPA D05 Subplate Mounting Seal: N – Nitrile Cracking Pressure: Omit - 5 PSI Seals: Buna-N (Nitrile) Parker Division: Hydraulic Valve Division Pilot Operated Check Valve: CPOM Poppet Style: DD - Double Poppet A and B Ports Max Flow (at 3000 PSI): 20 GPM (77 LPM) Controlled Ports: A and B Port Series: CPOM Max Pressure: 5000 PSI (350 Bar) Subplate Pattern: NFPA D05 (CETOP 5, NG 10) Parker Group: Hydraulic Crack Pressure: 15 PSI Dimensions: Length 2.76”, Width 1.77” Height 1.57” Removed from Equipment – Excellent Condition Made in USA Learn More

Manifold. ISO5599/2 Max operating pressure: 150-PSIG-air. CSA CE. All metric fasteners. With two 236-384B 24VDC 4W coils "with bridge." 41.5 x 68.3mmH x 210mmL plus connectors. Learn More

Norgren Fluidics  - 4LD-010-D00+ - 4LD-010 - Check Valve, Miniature.

A check valve is the simplest type of directional control valve used in hydraulic systems. Check valves stop the flow of fluid in one direction and allow free flow in the opposite direction. They are also known as non-return valves. Check valves may be used as prefill valves, bypass valves, pre-tensioning or protection of hydraulic components against pressure surges.

Extremely low crack pressures 10-32 UNF or barbed tube connections Direct in-line mounting Control flow direction in medical equipment, instrumentation systems, and in miniature pneumatic control systems.

Duckbill type check - Non-venting

Material: Body - Aluminum, Duckbill - Epichlorohydrin

Crack Pressure: 8" H2O (Pressure required to produce .001 scfm (28.3 cc/m) forward air flow)

This check valves has a 200 x 200 mesh, stainless steel inlet filter screen to protect the duckbill.

Furnished with two adapters for use with 1/16" ID flexible tubing.

Connection: 10-32 UNF.

Tube Connection.

Genuine Norgren Fluics - New Old Stock

Proudly Made in USA

Learn More

Noshok - PGL-C-63-N-C-300 - Gauge, Pressure.

0-3000PSI / 0-20000kPa.

Glycerin Filled.

Connection: 1/4" NPT Threaded Shaft.

Dimensions: 2.5" D x 2.5" high x 1.333" deep.

New - Manufactured in Germany.

Learn More

NORGREN - RM/55463/M/50 - Cylinder, Roundline.

Magnet piston as standard – provides a wide range of control options

Attractive clean- line design – enhances installation appearance

Threaded rear end covers on ∅ 32 mm to ∅ 63 mm simplify mounting

Threaded fixing holes in both end covers – increased mounting versatility

Actuator. Single ended.

Dimensions: 63mm.

Piston rod material: stainless steel (Martensitic).

Strokes: 50mm.

Series A.

New Old Stock 

Note: Cosmetic Scratch from bulk storage.

Learn More

NORGREN - L74M-4AP-QDN - Lubricator, Micro-Fog.

Excelon® design allows in-line or modular installation

Quick release bayonet bowl.

Flow sensor provides a nearly constant oil/air ratio over a wide range of flows

Highly visible, prismatic liquid level indicator lens on metal bowls

All round (360°) visibility of sight-feed dome for ease of drip rate setting

Micro-fog and oil-fog

250PSIG 17 Bar max.

Flow** scfm (dm3/s): 154 (73)

Port size: 1/2" PTF.

Nominal Bowl Capacity: 7.9 oz

Temperature: 170 Deg F / 80 Deg C max.

Dimensions: 3.15" Wide x 9.07" High

Weight: 1.61 (0.73)

New

 

Learn More

NORGREN - L64M4APQDN - Lubricator, Micro-Fog.

Olympian Plus plug in design

Constant oil density output with varying flow

Easy fill with quick release bayonet bowl

High visibility prismatic sight glass

Use Micro-Fog models in applications with one or more points of lubrication.

Use Oil-Fog models to lubricate a single tool, cylinder or other airdriven device.

250PSIG 17 Bar max.

Port size: 1/2".

Temperature: 170 Deg F / 80 Deg C max.

Note: Marked L64M-NNP-QDN.

Factory New

Learn More

NORGREN - K79DA00KS6KV2 - Directional Control Spool Valve.

Nugget 200 Directional Control Spool Valve.

Long Lasting Spool Design

High Flow Compaact Valve

110 50Hz/120V 60Hz 8VA.

Vacuum to 150PSI.

Operating Temperature: 120 Deg F.

New

Learn More

NORGREN - B64G4AKAD3RMN - Filter Regulator Assembly.

Port Size: 1/2" (0.50")

Flow† scfm (dm3/s): 225 (106)

Inlet: 250 PSIG 17 Bar.

Range: 6-150 PSIG -.4 - 10 Bar.

Temp: 175 Deg F / 80 Deg C.

Weight: 3.69 il (1.55kg)

Replacement Element: 4338-01 um

Olympian PLUS Plug-in System.

Effective liquid removal and particulate filtration

Large filter element area provides minimum pressure drop

High flow unit with large valve and diaphragm

Push to lock adjusting knob with tamper resistant option

New

Learn More

Pneumatic Actuator 526 Pounds at 60 PSI. Double acting torque: 526 lbs. Drive type: SQ. PSI max: 150. W/O bracket kit. More info: http://www.circorenergy.com/kfvalves/PDF/KF%20Contromatics%20PS%20Sept%202003.pdf Learn More

Cylinder, 3"D x 15.5"L. 145-psi. Learn More