AC to DC Adapter
- WEHO - S-400-24 - Industrial Power Supply, DC, Switching. 400 Watt, 24 VDC, 17 AmpIN STOCK - MORE THAN 100 READY TO SHIP!
WEHO - S-400-24 - Power Supply, DC, Switching. 400 Watt, 24 VDC, 17 Amp
Connect this unit to 110 or 220 Volts AC household power, and it will supply 400 Watts at 24 Volts DC and 17 Amps.
This power supply has been engineered specifically for use with DC motors. Most power supplies designed for use with LED lighting or other electronics will simply shut down when exposed to the high current demands of motors. Built-in current limiting protects the unit from overloads and short circuits. The current limiting feature enables these power supplies to keep functioning through the high-current start-up surges from motors. AmpFlow power supplies will just limit the current to the rated maximum even when a larger load is called for, (like when a DC motor starts up). Also, inductive loads (like motors) can cause damage to power supplies that are not designed for them.
These power supplies also work well in any application where AC line voltage needs to be converted to DC voltage. Other uses include LED lighting, HAM radio, battery charging, and replacing plug-in AC adapters when more power is required.
Short-circuit and overload protections help these units survive harsh operating conditions. The power supply shuts down temporarily if the temperature, current, or voltage goes beyond the safe operating range, and it starts up again automatically when the condition goes away – no rebooting is necessary.
This high-efficiency power supply has an output voltage that is adjustable by plus or minus 10%. It includes an EMI filter to minimize interference with radio signals and a soft-start circuit that reduces the AC inrush current peaks. Every power supply goes through a full-load burn-in test, so no defective unit leaves the factory.DC output voltage: 24V
DC output current: 17A
DC output voltage error: ±1%
Ripple & noise: 150mV
Efficiency: 86%
AC input voltage range: 85-132VAC/170-264vac 47-63HZ
Input current: 6.5A/115V 4A/230V
AC inrush current: Soft-Start Current 25A/115V 50A/230V
Leakage current: 3.5mA/240VAC
DC adjustable range: ±10% rated output voltage
Over load protection: 105-135% cut off the output auto -recovery
Over-voltage protection: 115-135 cut off the output auto -recovery
Setup rise hold up time: 200ms 50ms 20ms
Withstand voltage: I/P-O/P:1.5KVAC 1minute, I/P-FG:1.5KVAC 1minute, O/P-O/P:0.5KVAC 1minute
Withstand temperature: -10°C~+60°C,20%-90% RH
Dimensions: 8.5" X 4.5" X 2.0"
Weight: 1.05kg (2 Pounds)
This unit meets all the following safety and EMC standards: UL 1950, EN60950, EN55022, IEC100-3-2, CE, ROHS
Applications: Motor Controllers, CNC, Industrial Automation, LED Strip Lights, CCTV Power Supply , AC/DC Adapter.
Alternates: AmpFlow S-400-24, Meanwell 2-400-24, Mulview S-400-24, Mingwei S-400-24
Factory New
- SHENZHEN FUJIA APPLIANCE CO LTD - FJ-SW1280J010 - Power supply, AC adapter. Output: 6VDC 1Amp.READY TO SHIP - ONLY 34 LEFT IN STOCK!
SHENZHEN FUJIA APPLIANCE CO LTD - FJ-SW1280J010 Power supply, AC adapter.
Output: 6VDC 1Amp.
Input: European use 100-240VAC 0.60Amp max 50/60Hz.
Switching adapter with 52", 2 conductor cord and a female 5.5mm OD/2.4mm ID receptacle.
Learn More - MPS - EL-9600 - AC Adaptor 12V 300mA.$4.00Out of stock
AC Adaptor. Input: 120VAC 60Hz 5 watt. Output: 12VDC 300mA, unregulated. Wall mount, plug-in with six-foot output cord terminated in 1/8 phone plug.
Learn More