Stepper Motors
- Eastern Air Devices - LA23BCK-47 - 6VDC 1.8degree 4-Ph 6-wire Stepper$69.956VDC 1.25Amp 1.8degree 4-Phase 6-teflon 15"wires Stepper Motor 2.25"D x 3.0"L 4-hole mounting 1.85" spacing 0.25"D shaft 0.75"L New, Old Stock weighs 2-pounds Learn More
- ARC SYSTEMS - 2015-02 - 204239 - Arcustep 24VDC Stepper MotorSpecial Price $18.98 Regular Price $28.95
ARC SYSTEMS - 2015-02 - 204239 - Arcustep 24VDC
Step Angle 15 Deg
4 Wire Stepper
Smoth Ball Bearing Shaft Support
Servo-Mount 50.7mm Diameter x 75mm Long
Plus 11.1mm Diameter Worm Gear 111mm Long - 6.7mm diameter shaft 9.3mm Long at rear.
Four Wire Teflon Leads.
Measured Resistance is either 20 or 40-Ohms fron one wire to any other wire
New Old Stock
Made in USA
Learn More - AIRPAX - A82352-M3 - 18deg 1.5-In-Oz 42mm 4-wire$5.95Stepper, 18 Deg/Step, 1.5 in-oz, 4 wires, Mounting 2 holes 42mm apart, Body 37x50x20mm thick, Shaft 2x8mm with4.6mm gear,2.6 oz, 4.6mm 10-toothGear. Learn More
- Japan Servo Co. - KH42HM2-852 - 1.8 Degree Nema 17 Stepper MotorIN STOCK - MORE THAN 500 READY TO SHIP!
Japan Servo Motors - KH42HM2-852 - 1.8 Degree 2 Phase Hybrid Stepping Motor
Commerical Quality KH42 Series 800 Type High efficiency, High Torque, Low Vibration and Low Noise Motor.
Much improved quality and performance over the chinese Nema 17 Stepper Motors on Amazon & Ebay! Very nice upgrade for 3D printers at a great price!
This new series 800 type, which maintains the high torque performance of our conventional 500 Type and lower vibration and noise. High efficiency and high torque have been achieved through our intensive research on magnetic circuitry. A unique tooth profile has been employed through the development of a new proven theory to achieve low vibration and low noise.
Specifications
NEMA 17
Drive Method - Uni-Polar 6 Wire
Bearing Description
- NMB Precision Radial Deep Groove Ball Bearings (R-1650HH)
- D: 5 mm (I.D.); D: 16 mm (O.D.); B: 5 mm (Width).
- Shielding: ZZ - Double sided metal shielding.
- The ZZ shielding protects the bearing against samll particles and dust while eliminating any drag usually associated with rubber sealed bearings.
- High quality and industrial precision. Made from world class materials to ensure durability and a long life.
- Excellent for motors, machines, tools
Step Angle - 1.8 Degrees/step
Voltage - 24 Volts
Current - 0.38 Amps/Phase
Winding Resistance - 22.4 Ohms/Phase
Inductance - 21.5 mH/Phase
Holding Torque - 2.0 kgf cm (28 ounce inch)
Detent Torque - 150 gf cm (2.1 ounce inches)
Rotor Inertia - 42 g cm2 (0.23 ounce inches)
Weight - 260 g (0.57 Lbs.)
Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)
Insulation resistance 500 VDC 100Mohm min.
Dielectric Strength - 500 VAC 50 Hz 1 minute
Operating Temperature Range 0 - 50C
Allowable Temperature Rise 70 degrees
Dimensions 1.65" X 1.65" X 1.34" (42mm X 42mm X 34 mm Max)
Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.
NEMA 17
Drive Method - Uni-Polar 6 Wire
Bearing Description
- NMB Precision Radial Deep Groove Ball Bearings (R-1650HH)
- d: 5 mm (I.D.); D: 16 mm (O.D.); B: 5 mm (Width).
- Shielding: ZZ - Double sided metal shielding.
- The ZZ shielding protects the bearing against samll particles and dust while eliminating any drag usually associated with rubber sealed bearings.
- High quality and industrial precision. Made from world class materials to ensure durability and a long life.
- Excellent for motors, machines, tools
Step Angle - 1.8 Degrees/step
Voltage - 24 Volts
Current - 0.38 Amps/Phase
Winding resistance - 22.4 Ohms/Phase
Inductance - 21.5 mH/Phase
Holding Torque - 2.0 kgf cm (28 ounce inch)
Detent Torque - 150 gf cm (2.1 ounce inches)
Rotor Inertia - 42 g cm2 (0.23 ounce inches)
Weight - 260 g (0.57 Lbs.)
Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)
Insulation resistance 500 VDC 100Mohm min.
Dielectric Strength - 500 VAC 50 Hz 1 minute
Operating Temperature Range 0 - 50C
Allowable Temperature Rise 70 degrees
Dimensions 1.65" X 1.65" X 1.34" (42mm X 42mm X 34 mm Max)
Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.
ApplicatIons: RobotIcs, 3D Printer, Arduino, CNC, Router.
- SUPERIOR ELECTRIC CO. - M172-FF-401 - Slo-Syn Stepper 2.6VDC 2,000-In-Oz$532.89Motor, Slo-Syn Stepper, Bipolar. Supply: 2.6VDC. N/P Current: 4.0A. Winding Res.: 0.65-ohms 14.6mHy. Steps: 200 steps/Rev. Torque: 2000 / 1200-Oz-In. Direction: Reversible. Wire count: 4 terminals. Mech. Mtg.: NEMA 66. Body Dimensions: 165mm frame. SPEC.A213803. Ratings are for bipolar connections. Learn More
- SUPERIOR ELECTRIC CO. - M092-FF-413C5006 - SloSyn synch 3.47VDC, 2Amp plus encoder.$189.00Motors, stepper. SloSyn synchronous 3.47VDC, 2Amp, 200S/R. Hold: 325 oz in. Attached encoder 220022/219273, 500PPR with a DB9 female connector.Motor case: mount 3-1/4" square with 3-3/4" mt ctrs x 4-5/8" long body. Shaft: 0.380" D x 1-1/8" long. Connections: 4 conductor foil shieled cable plus ground wire. Learn More
- SUPERIOR ELECTRIC CO. - M062-CE04 - Motors, stepper. 4.2V, 1.9Amp, 200S/R.$159.00Motors, stepper. 4.2V, 1.9Amp, 200S/R, Hold: 100 oz in. 64Deg rise. NEMA 23, 2-stack. Case: 2-3/16" square mount with 2-1/2" ctrs. 1/4" shaft x 3/4" long.Connections; 8 pin male header with mating female socket included. Learn More
- SHINANO KENSHI - STH-39D249 - 1.8Deg 7.1-ohm 6-wire Mini-StepperSpecial Price $28.98 Regular Price $38.50READY TO SHIP - ONLY 2 LEFT IN STOCK!
SHINANO KENSHI - STH-39D249 - 6 Wire Stepper Motor.
Status: Discontinued
Dimensions: 39mm Square x 37mmD.
NEMA Size 14
4.7mm Flatted Shaft 24mmL.
1.8 Degree per Step
7.1-Ohm Coils
6-long Wires.
New
Made in Japan
Learn More - N.A. PHILIPS - K82924-M2 - Stepper Motor 5V 0-150PPS REV 0-375 RPM$12.95STEPPER MOTORS REV 5V 1AMP 0-150PPS REV 0-375 RPM 8-wire mounted on L-shaped bracket 4.235 x 3 x 2"D double flats on 6.7mm 1/4" shaft12mm long 70mm dia x 43mm deep 2-poundsRemoved from equip. Learn More
- FUJI ELECTRIC - SM35-2006B - Motor, stepper. 13VDC 4-wire 35mmDSpecial Price $7.98 Regular Price $15.95READY TO SHIP - ONLY 56 LEFT IN STOCK!
FUJI ELECTRIC - SM35-2006B Motor, stepper.
Supply: 13VDC.
Coil Resistance: 38 ohm.
Direction: Reversible.
Wire Count: 4-Wire.
Mech. Mtg: Slotted Flange with two slots 42mm spacing
Body Dimensions: 35mm dia x 21mm deep.
Shaft: 1.9mmD 7.5mmL.
Note: Fuji Electrochemical Co - Japan.
Learn More - PACIFIC SCIENTIFIC - E33NLEC-LNF-NS-01 - 65VDC 5.5A 1.8deg Bipolar 4-wire STEPPER, NEMA 34Special Price $198.98 Regular Price $450.00
PACIFIC SCIENTIFIC - E33NLEC-LNF-NS-01 Motors, Stepper. NEMA 34
Status: Discontinued
Bipolar series 65VDC 5.5Amp 202W 1500RPM
1.8DEG/STEP.
Power: 202W.
Dimensions: 86mm D x 155mm deep, 9.6 x 30mm flatted inside thread shaft.
Mounting 70mm centers on 86mm square flange.
Weight: 8.3 lbs.
Additional Information: https://www.artisantg.com/info/Pacific_Scientific_Step_Motors_Datasheet.pdf
Proudly Made in USA
New old Stock
Learn More - Oriental Motors - PH268-01 - Stepper motor. 5.4V 1.5Amp 1.8 Deg/Step.Special Price $89.98 Regular Price $149.95Stepper motor. 5.4V 1.5Amp 1.8 Deg/Step. PP6. 6 Wire. Mount: Panel/Flange: 2.220" (56.4mm) square. 4 Hole mount with 2/5/8" centers. Dimensions: 2.224" (56.4mm) D x 3.046" (77.3mm) long, plus shaft. Shaft: 1/4" x 0.75" long. Learn More
- HURST - SP2953 Model AS – Pear Shaped Geared Motor, Stepper. 12VDC 3 Watt.Special Price $18.98 Regular Price $28.95READY TO SHIP - ONLY 3 LEFT IN STOCK!Hurst - SP 2953 – Pear Shaped Geared Stepper Motor. Voltage: 12VDC Power: 3 Watt. Insulation Class A 105C Operating Temperature: -10C to 40 C Ambient Gear Housing: Die Cast with Hardened Gears Gear Reduction of 20:1 w/Sleeved Bearing Dimensions: Body 2.812” X 2.187” X 1.625” Shaft Diameter: 0.1874” Diameter Note: Used / Removed from Equipment Made in USA Learn More
- Eastern Air Devices - LA23ECH-28 - Stepper motor. 1.8 Deg/Step. NewSpecial Price $24.98 Regular Price $36.95Eastern Air Devices - LA23ECH-28 - Stepper motor. 1.8 Deg/Step. New Stepper Motor. 2 Phase 1.4VDC 1.9Amp 1.8 Deg/Step. With pulley on 1/4" shaft 20mm long (57.3mm D x 52.2mm tall with pulley overall is 71.6mm tall). Oval mount 66.5mm centers. Motor has 4-Conductor 12" wire leads. Eastern Air Devices. Weight: 1.2-pounds. New Old Stock Learn More
- Eastern Air Devices - LA23ECS-36 - 1.9VDC 1.8deg/step 2-Ph 4-wire StepperSpecial Price $54.98 Regular Price $85.00
Eastern Air Devices - LA23ECS-36 - Stepper Motor
1.9VDC 2 Phase 3Amp 1.8 DEG.
Stepper Motors 4-Wire
Dimensions: 57mm Dia x 52mm deep plus additional 6.3mm [1/4"] Shaft 18mmL.
Nema 23
IP40
Weight 18oz.
Motor has a 7" long 4-Cond wire and connector.
Square Mount 47mm Ctrs.
Genuine Eastern Air Devices - New Old Stock
Made in USA
Learn More - Eastern Air Devices - LA23ECH-27 - Motor, Stepper. 1.4VDC 1.9A 1.8 Deg/Step.Special Price $19.98 Regular Price $38.50
Eastern Air Devices - LA23ECH-27 - Motor, Stepper.
2 Phase
1.4VDC 1.9Amp
1.8 Deg/Step.
Torque: 35 in-oz (2.45 kg*cm)
Steps/Revolution: 200
4 Wire, 11" Leads.
Oval Mount: 66.5mm centers.
Dimensions: 57.5mm D x 52.4mm deep, plus 6.3mm flatted shaft 11mm long.
Alternate P/N: 400-0072.
Genuine Eastern Air Devices - New Old Stock
Proudly Made in USA
Learn More - Philips AIRPAX - S-A83709-M4 - Motor, Stepper. 12VDC 15 Deg/Step 0.4 Amp.
Philips AIRPAX - S-A83709-M4 Motor, Stepper.
12VDC 15 Deg/Step
0.4 Amp/Phase IMP-Protected.
6 Wire.
Shaft: 0.25" D x 0.7" long.
56mm diameter x 23mm thick.
Mounting slots on 68mm centers.
Six 4" leads.
Shaft: 0.25" diameter x 0.75" long.
C/N 1218676-00
Made in Singapore
Digital P/N: 70-18658-00
Learn More - Warner Electric - M062-LE-511E - STEPPER SLO-SYN 5.3V 200S/R$89.00200-Steps/Revolution 5.3VDC 1.6A STEPPER with 8-wire RENCO ENCODER Model#77678-045 "Connect per 225373" 2.25"OD x 6" including 1/4" [6.3mm] x 18.8mm shaft - 47mm mounting centers, 56.6mm sq flange Learn More
- SEIBERCO Inc - 2311-021 - Motor. Stepper. 8 wires.$25.00Motor. Stepper. 8 wires. Mounting: 4 holes 0.2"D x 1.85 spacing. Body: 2.25" sq x 2"L. Shaft: 3/8"D x 3/4"L. Weight: 1.6 lbs. 6' cable. Learn More
- Oriental Motors - PH268-21M2 - Motors, stepper. 2-PH 5.4VDC 1.5A 1.8 Deg/Step$133.00Motor, stepper. Supply: 5.4VDC 2-Phase. N/P Current: 1.5A. Steps: 1.8 degree. Weight: 2.8 lbs. With magnetic brake DC24V 0.17Amp. Learn More
- Motorola - SAA1042AV - IC. Stepper motor driver circuit.$25.00Out of stockIC. Stepper motor driver circuit. Package: 16 Dip. Learn More
- IEF WERNER - 86/2P/8A/3,7Nm/SDB - Precision Stepper 1.8deg BiPolar Sealed$795.882-Phase Stepper Motor 85mm Dia 213mm Long plus 1"long keyed shaft 10.1mm / 0.40" dia - 70mm mounting centers - two control connectors 6-pin(Motor Y) and 12-pin(Enc Y) IP-52 Amps Rw-0.2 Ohm I(bip)8Amp 1.8-degree- new surplus, 11.1# unpackedpacked)... Learn More
- AIRPAX - K82702-P2 - Motor, stepper. 12VDC.$9.99Motor, stepper. 12VDC, step angle 7.5 Deg. Ohms/Coil 61. Enclosed, 4 wire. Dimensions:2.25" D x 1" high. Mount flange oval 3.2" long with 2 holes at 2.65" centers. Note: Possibly used. North American Philips or Airpax. Learn More
- FuJI Electrochemical Co. - SM25-24KO - 6-Wire 25mm Mini Stepper MotorSpecial Price $14.98 Regular Price $18.50READY TO SHIP - ONLY 5 LEFT IN STOCK!
FUJI Electrochemical Co. - SM25-24KO - Motors Mini Stepper
A 6-wire stepper motor is similar to a 4-wire configuration with the added feature of a common tap placed between either end of each phase. Stepper motors with these center taps are often referred to as unipolar motors. This wiring configuration is best suited for applications requiring high torque at relatively low speeds.
2mm Shaft 8mm Long
6-Wire
Dimensions: 25mm [1"] Dia x 6mm [0.63"'deep 2-hole mount 32mm [1.25"] Centers
New Old Stock
Made in Japan
Learn More