Inductors

EMI Suppression Filters. Chip ferrite bead. Impedance: 1000 Ohm 200mA. DC Resistance: 0.4 Ohm. Package: SMD 0805. Package of 25. Note: For high speed signal. Learn More

Inductor, ferrite bead. EMI Suppression Filters. Impedance: 1 Ohm. Package: SMD 0805. Package of 25. Note: For power lines. Learn More

Inductor, ferrite bead. EMI suppression filter. 600 Ohm 200mA 25%. DC Resistance: 1.1 Ohm. Case: 0805 SMD. Paper tape on manufactures 7" reel. New parts. Note: Package of 50. Learn More

Inductor. 330uH 0.06Amp 5.6MHz. Case: SMD J bend connections. New. Package of 10. Learn More

Inductor, choke. Snap-on ferrite choke. Dimensions: Assembly 1.650" D x 1.9" high (max) New. Learn More

Inductor, high frequency. 2nH +/-0.3nH. DC resistance: 0.09 Ohm max. DC current: 1000mA. Self-resonant freq: 13GHz. Q-Factor: 12. Package: SMD 0805. Learn More

COILCRAFT - 132-04L Inductor, Coil.

These fixed RF coils are part of Coilcraft’s series of insert molded inductors. This precision construction technique
ensures constant winding pitch, long-term stability and tight inductance tolerance (±5%).

37.5nH. 4.7mOhm.

4Amp.

Color: Yellow.

More info: http://www.coilcraft.com/pdf_viewer/showpdf.cfm?f=pdf_store:132.pdf

Learn More

MICROMETALS - T157-8/90 Toroids.

The T157-8/90 Toroidal core from Micrometals is a size Toroidal core manufactured from Micrometal's unique blend 8/90 material. and can be clearly identified by the cores' Yellow/Red color.

Powdered Iron Core

AL= 42 (nH/N2) +/- 10%

Initial Permeability = 35u

Package: 40.2mm OD x 24mm ID x 14.7mm thick.

Color: yellow with red.

From: 240pc / box.

Genuine MicroMetals product

Recommended uses: Line filters, Power conversion

Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

Learn More

Micrometals - T131-18 Inductor, Core.

The T131-18 from Micrometals is a size 131 Toroid core manufactured from Micrometal's unique blend 18 material. This material has low core loss similar to the -8 Material with higher permeability and a lower cost. Good DC saturation characteristics. Material reference permeability (µo) is typically 55 and can be clearly identified by the core's Green/Red color.

79 Al nH/N(2).

Dimensions: 1.300" (33.0mm) OD x 0.437" (11.1mm) high with 0.780" (19.8mm) ID.

Color: Green/Red.

Powdered iron core.

Genuine MicroMetals product

Recommended uses: Line filters, Power conversion

Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

Learn More

Inductor. Type 103A-51. Tuning range: 30 - 50 Mc. L=0.25uH. C= 5.5uF. Q=225 approximately. Housing: metal can 3" D x 3" high. Manufactures date 1970. Used, very good condition. Learn More

Inductor. 333nH 3.0Amp. 15-1/2 Turns. PCB mount. More info: http://www.coilcraft.com/132.cfm Learn More

TOKO AMERICA - E526HNSA-100059 Inductor, coil.

Status: Discontinued

375nH, Adjustable.

Type MC120.

Mount: PCB thru Hole. New.

Learn More

Inductor, toroid. 375uH. Mount: PCB or Panel, vertical. Dimensions: 1.2" OD x 0.761" wide, with an approximate ID of 0.404". Note: More info: http://www.hurricaneelectronics.com/classicSeriesData.php Learn More

COILCRAFT - G6886A - Inductor, coil. Slot Seven Tunable.

These versatile Coilcraft variable inductors operate over a wide range of frequencies. Standard inductance values are available from less than 100 nH to over 250 µH. Custom values can also be provided upon request.

Coilcraft “Slot Seven” RF coils come in an international 7 mm package. Their precision-molded slotted bobbins ensure tight tolerances and high stability.

A variety of shielding options are offered. “Slot Seven” coils are tuned by means of slotted ferrite tuning cores for easy, positive adjustment. Use the Coilcraft Slot Tuner for a precise fit to the tuning slug.

0.38uHy (0.38-microhenrey) RF Coil

Adjustable Ferrite Core.

Package: Shielded Metal Can 7mm

Dimensions: 7.62 mm X 7.62mm.

Height above PCB: 11.68mm

New Old Stock

Genuine Coil Craft 

Made in Taiwan

Alternate: 7M3-331

Learn More

Inductor. Type 103A-50. Tuning range: 20 - 35Mc. L=0.5uH. C= 5.5uF. Q=225 approximately. Housing: metal can 3" D x 3" high. Manufactures date 1970. Used, very good condition. Learn More

Inductor. 709nH 1.5Amp. 20-1/2 Turns. PCB mount. More info: http://www.coilcraft.com/132.cfm Learn More

COILCRAFT - G6887A - 0.75uHy Inductor, Choke Coil, Slot seven Tunable.

Coilcraft tunable coils provide the compactness of a 7mm coil and the low drift reliability of an insert molded coil. The windings of these economical coils are precision molded into a single piece of polypropylene for mechanical and electrical stability. Plated brass shield cans with solderable tabs provide integral shielding and additional mounting stability.

Coilcraft “Slot Seven” RF coils come in an international 7 mm package. Their precision-molded slotted bobbins ensure tight tolerances and high stability.

A variety of shielding options are offered. “Slot Seven” coils are tuned by means of slotted ferrite tuning cores for easy, positive adjustment. Use the Coilcraft Slot Tuner for a precise fit to the tuning slug.

0.75uHy (0.75-microhenrey) RF Coils

Tunable RF Indusctor coils

Adjustable Ferrite Core.

Package: Shielded Metal Can 7mm

Dimensions: 7.62 mm X 7.62mm.

Height above PCB: 11.68mm

New Old Stock

Genuine Coil Craft 

Made in Taiwan

Alternates: 7M2-683, 7M2-823

 

Learn More

COILCRAFT - G6978A - 0.93uHy Inductor, Choke Coil, Slot Seven Tunable.

Coilcraft tunable coils provide the compactness of a 7mm coil and the low drift reliability of an insert molded coil. The windings of these economical coils are precision molded into a single piece of polypropylene for mechanical and electrical stability. Plated brass shield cans with solderable tabs provide integral shielding and additional mounting stability.

Coilcraft “Slot Seven” RF coils come in an international 7 mm package. Their precision-molded slotted bobbins ensure tight tolerances and high stability.

A variety of shielding options are offered. “Slot Seven” coils are tuned by means of slotted ferrite tuning cores for easy, positive adjustment. Use the Coilcraft Slot Tuner for a precise fit to the tuning slug.

0.75uHy (0.75-microhenrey) RF Coils

Tunable RF Indusctor coils

Adjustable Ferrite Core.

Package: Shielded Metal Can 7mm

Dimensions: 7.62 mm X 7.62mm.

Height above PCB: 11.68mm

New Old Stock

Genuine Coil Craft 

Made in Taiwan

Alternates: 7M2-104, H7095A

 

Learn More

Inductor, coil.

Vintage variable RF coil.

Ferrite Core Luning Slug coil form. 

Less than 1uH.

Mount: PCB 2 pin.

Dimensions: 11.6mm Diameter x 14.8mm above board.

Package of 5.

Learn More

Bourns - J.W.MILLER - 50A226EBI Inductor.

1.26uH - 2.75uH adjustable encapsulated.

Q=76@7.9Kc.

Mount: panel.

Dimensions: 0.437" D x 1" long.

Complete with manufactures specification sheet.

Genuine Vintage JW Miller New Old Stock

Learn More

CADDELL BURNS - 6740-14 Inductor, coil.

Inductance: 1.2uH.

Package: PCB 4 Pin. 7.9mm square x 10.7mm above board.

Note: Variable/adjustable inductor. Shielded metal can.

Learn More

Inductor, choke. Inductance: 2uH. Package: axial leads. Dimensions: 0.07" x 0.25" dia. Learn More

Bourns - J.W.MILLER - WZL2.2 Inductor, coil.

Variable RF 2.2uH.

Top adjustable.

Mount: PCB 4-Pin vertical.

Dimensions: 8.2mm D x 12.9mm high.

Lead spacing: 5.0mm centers.

Note: subminiature shielded.

Only marked DEC 9405-16.

Learn More

CADDELL BURNS - 6740-17 Inductor, coil.

Inductance: 2.2uH.

Package: PCB 4 Pin. 7.9mm square x 10.7mm above board.

Note: Variable/adjustable inductor. Shielded metal can.

Learn More