Inductors

DALE - IH10-05  5uH 10Amp 10% Inductors/Coils.

Noise filtering for switching regulators, power amplifiers, power supplies and SCR and TRIAC Control circuits.

DCR = 0.01-OHM

SRF = 30Mhz

1.125" x 0.687" x 0.812" (80 per manuf bx NEW @ $1.00 each piece/$80.00)

Additional Information: https://www.vishay.com/docs/34013/ih.pdf

Learn More

RadioShack - 273-104 - Snap-On Ferrite Toroid RF Choke Cores, Two (2) Cores in Package.

Reduce or eliminate on RFI (radio frequency interference) with this snap-together Toroid Choke Core. Effective "Roadblock" to Radio Frequency Interference. Easily use choke core on a phone, computer, AC, audio and coax cables. No cable cutting necessary - you simply wind it through the core.

Fast 'n Easy Solutions to RFI Problems

Helps reduce RFI (Radio Frequency Interference). Use on Phone, Computer, Keyboard, AC, Audio and Coax Cables.

Use as close to the equipment as possible, wrapping the cord through the center of the coil until the core is filled. All turns must be wound in the same direction to avoid cancelling the effects of the core.

No need to cut cable - Simply wind it through the core and snap together.

Ferrite Split Core Chokes (Two per package)

Effective to 500 MHz.

Approximate Overall Dimensions: 1.62" X  1.125" X 0.396"

Opening: 0.885" X 0.380" (7/8" X 3/8")

Includes Detailed Instructions on Theory and Installation.

Note: Some customer report using as a step up Transformer by winding primary and secondary coils driven at 60 Hz. 

Additional Interference Information: 

http://www.audiosystemsgroup.com/RFI-Ham.pdf

http://www.ll-leasing.com/pritch/shortwav.htm

https://www.qsl.net/wa2lqo/nlnov99.html

http://www.industrial-electronics.com/measurement-testing-com/zapping_electrical_noise.html

UPC 040293126568

NSN: 5950-01-322-7847

Equivalent Part Numbers: 2730104, 273-0104, 273-104

Learn More

Vishay - DALE - IHD3-10 Inductor, Coil, 10uH.

Status : Discontinued

Inductor Type: High Frequency

Series: IHD

Inductance:10µH

Temperature: -55 C to 125 C

Package/Case: Axial Leaded

Core Material: Ferrite 

Maximum Current: 4A.

Tolerance: 15%.

DC Resistance: 0.016 Ohm max.

Dimensions: 0.900"L x 0.460"D (22.86 X 11.68 mm) plus axial leads 1.3"L.

Learn More

Vishay DALE - IHA-502 Inductor, choke.

10uH 8.3Amp 0.015 Ohm.

Tolerance: 10%.

Mount: PCB.

Package: Axial leads.

Dimensions: 0.475" (12.07mm) D x 1.05" (26.67mm) long.

Note: Filter inductors, high current.

Protected by polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements.

Learn More

VISHAY DALE - ITU-1731-4 High Current Toroid Inductor Copper Coil Horizontal Mount 50uH 40A Toroid inductance coils are important electrical components for preventing electromagnetic interference, widely used in supply circuits, miniature TVs, adapters, DC-DC power modules, various electronic products, etc. The advantage of the toroidal shape is that, due to its symmetry, the amount of magnetic flux that escapes outside the core (Leakage Flux) is low, therefore it is more efficient and thus radiates less Electromagnet Interference (EMI). Large Low Loss, Ferrite Core with stable electrical operating characteristics maximize inductor efficiency by minimizing copper losses High-Reliability Low-Resistance Leaded Inductor. Toroid Cores are Self Shielded requiring no need for an enclosure. Inductance: 50uH Current: 40Amp. Inductance @ 1Vrms, 10Khz, 40Amps DC: 50uH min. Inductance @ 1Khz w/out DC: 60uH DC-Resistance: 0.01 Ohms. Wire Diameter: 1.83mm (0.071") 11 AWG Core Material: Ferrite Dimensions: 2.2" Diameter x 1.1" High. Connections: Quick Connect or PCB Solder Mounting. Note: Leads are approximately 1" Long and some have 1/4" Quick Connects attached. Operating Temperature: -55°C to 125°C Extremely Conservative Design Current Rating. We counted about 64 turns of 13AWG Enameled Magnet Wire on this High Current Toroid Choke designed to rid audio equipment noise from the lights and props used on a commercial stage. Applications: Applications: EMI Filters, Buck and Boost Switches, Ballasts, Medical, Telecommunications, Musical Instruments, Industrial Controls, Chokes, Power Supplies, Inverters, Amplifiers and Control Circuits. Made in USA – Factory New Large Quantity Available, Discounted Special order Toroid where some units have quick disconnect and other's don't directly from Vishay Dale Factory. Learn More

VISHAY DALE - IHD1-100UH Inductor, coil.

Inductance: 100uH.

Power: 1.1Amp.

Tolerance: 15%.

Package: Axial Leads.

Dimensions: 0.270" D x 0.70" long.

More info: http://www.vishay.com/docs/34016/ihd.pdf

Learn More

Vishay DALE - IHA-205 Inductor Choke, Ferrite Core Wirewound.

500uH 2.3Amp 0.32 Ohm.

Tolerance: 10%. Mount: PCB.

Package: Axial Leads.

Dimensions: 0.750" (19.05mm) D x 1.05" (26.67mm) long.

Filter inductors, high current used for Noise filtering for switching regulators, power amplifiers, power supplies, and SCR and triac control circuits.

Protected by polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements.

NSN 5950-01-191-9998

Learn More

Inductor, choke. 500uH 1.6Amp 0.42 Ohm. Tolerance: 10%. Mount: PCB. Package: axial leads. Dimensions: 0.550" (13.97mm) D x 1.05" (26.67mm) long. Note: Filter inductors, high current. Protected by polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements. Learn More

VISHAY DALE - IHB5-560 - Filter Inductor, High Current, Radial Leaded, Coil

Toroid inductance coils are important electrical components for preventing electromagnetic interference, widely used in supply circuits, miniature TVs, adapters, DC-DC power modules, various electronic products, etc. The advantage of the toroidal shape is that, due to its symmetry, the amount of magnetic flux that escapes outside the core (Leakage Flux) is low, therefore it is more efficient and thus radiates less Electromagnet Interference (EMI).

560uH  5 Amp, 0.105 Ohm.

DCR Max. (Ohms): 0.105

Rated DC Current (Amps): 5

Lead E Spacing: 1.07 (28.18)

Max. Lead "F" Diameter: 0.045 (1/15)  

Tolerance: 10%.

Mount: PCB, Open Frame.

Core Material: Ferrite

Dimensions: 1.60" (Diameter) x 1.45" Coil Height) x 0.175" (core Diameter).

Additional Information: https://www.vishay.com/docs/34015/ihb.pdf

 

Learn More

Inductor, choke. Inductance: 3.3mH. Shielded. Tolerance: 10%. Dielectric withstanding voltage: 1,000V. Material: epoxy. Package: axial leads. Dimensions: 4.3mm D x 10.6mm long. Operating temperature: -55 to 105 Deg C. More info: http://www.vishay.com/docs/34048/ims5.pdf Learn More