Inductors & Coils

VISHAY DALE - ITU-1731-4 High Current Toroid Inductor Copper Coil Horizontal Mount 50uH 40A Toroid inductance coils are important electrical components for preventing electromagnetic interference, widely used in supply circuits, miniature TVs, adapters, DC-DC power modules, various electronic products, etc. The advantage of the toroidal shape is that, due to its symmetry, the amount of magnetic flux that escapes outside the core (Leakage Flux) is low, therefore it is more efficient and thus radiates less Electromagnet Interference (EMI). Large Low Loss, Ferrite Core with stable electrical operating characteristics maximize inductor efficiency by minimizing copper losses High-Reliability Low-Resistance Leaded Inductor. Toroid Cores are Self Shielded requiring no need for an enclosure. Inductance: 50uH Current: 40Amp. Inductance @ 1Vrms, 10Khz, 40Amps DC: 50uH min. Inductance @ 1Khz w/out DC: 60uH DC-Resistance: 0.01 Ohms. Wire Diameter: 1.83mm (0.071") 11 AWG Core Material: Ferrite Dimensions: 2.2" Diameter x 1.1" High. Connections: Quick Connect or PCB Solder Mounting. Note: Leads are approximately 1" Long and some have 1/4" Quick Connects attached. Operating Temperature: -55°C to 125°C Extremely Conservative Design Current Rating. We counted about 64 turns of 13AWG Enameled Magnet Wire on this High Current Toroid Choke designed to rid audio equipment noise from the lights and props used on a commercial stage. Applications: Applications: EMI Filters, Buck and Boost Switches, Ballasts, Medical, Telecommunications, Musical Instruments, Industrial Controls, Chokes, Power Supplies, Inverters, Amplifiers and Control Circuits. Made in USA – Factory New Large Quantity Available, Discounted Special order Toroid where some units have quick disconnect and other's don't directly from Vishay Dale Factory. Learn More

Inductor. Type 103A-15. Tuning range: 1.1 - 3Mc. L=50uH. C= 6uF. Q=200 approximately. Housing: metal can 3" D x 3" high. Manufactures date 1970. Used, very good condition. Learn More

PULSE ENGINEERING - P0848 - Inductors toroid.

KlipMount™ Series

inductance: 52uH

Current: 5 ADC.

Mount: PCB 2 pin.

More info: http://ww2.pulseeng.com/products/datasheets/SPM2007_46.pdf

Alternate: National LM267X-L48

Learn More

TDK/CAL-CHIP 56-uH SMD new inductors taped off reelhttp://www.tdk.co.jp/tefe02/e511_nl4532.pdf Learn More

Inductor, coil. Inductance: 56uH. Current: 190mA. Tolerance: 10%. Ferrite. Technology: wirewound. Case: axial leads. New. Learn More

J.W.MILLER - 50A475EBI Inductor.

26.5 - 58.7uH adjustable encapsulated.

Q=52@2.5Mc.

Mount: panel.

Dimensions: 0.437" D x 1" long.

Complete with manufactures specification sheet.

Learn More

Inductor, coil. Inductance: 65uH. Package: cylindrical, radial leads. Dimensions: 11.5mm D x 32.1mm long. Lead spacing: 11.0mm. Learn More

Bourns - J.W.MILLER - 6100-650 Inductor, RF.

Inductance: 65uH.

Tolerance: 10%.

Unshielded.

Mount: PCB.

Package: 8 Pin gull-wing leads.

Learn More

Bourns - J.W.MILLER - 5248-RC  Inductor, Choke.

68uH 5Amp 0.054 Ohm.

Tolerance: 20%.

High inductance, High Current Hash Filter Choke.

Ferrite Core.

DC resistance: 0.55 Ohm

Test Frequency: 1 KHz

Lead Wire Size: 20

Package: Axial leads.

Dimensions: 0.50".

More info: http://www.bourns.com/data/global/pdfs/5200_series.pdf

Learn More

Inductor, choke. Inductance: 68uH. Current: 0.90Amp. Resistance: 0.15 Ohm. 12MHz. Package: Shielded SMD. Rohs compliant. Learn More

Inductors, ferrite core. 68uH. DC resistance: 0.145 Ohm max. Max 1.56 amp. Operating temperature range: �55 to +125 DegC. Maximum power dissipation at 85�C 0.50 W. Inductance Measured at 1 V with no DC current. Dimensions: 6.1mm D x 18.8mm long. Case: axial leads. Learn More

MICROMETALS - 8-227 - Inductor, Coil. Toroid 83uH.

Powdered Iron Core Wrapped with 35 turns of magnet wire 0.034" D.

Mount: PCB vertical.

Dimensions: 9/16" OD x 7/16" wide, 1/2" ID.

Yellow/white.

Learn More

Inductor, choke. 85uH min 100kHz -300MHz common mode. Package: 4-dip. More info: http://www.viteccorp.com/data/t630-2.pdf. Package of 2. Learn More

COOPER - CTX100-4 - Inductor, Coil.

99.23uH 0.92Amp, 0.302 Ohm.

Tolerance: 20%.

Powdered Iron.

Package: SMD.

Dimensions: 13.97mm wide x 13.97mm long x 6.35mm High.

Note: Cooper Electronic Technologies.

Learn More

Inductor, chip. 100uH 93mA. Package: SMD. Without tab termination. Operating temperature: -55 to 125 Deg C. More info: http://ve1.com/images/product_pdfs/26k_ser.pdf Learn More

TOKO AMERICA - 187LY-821J INDUCTOR

Core Material: Ferrite

Mount  Radial, Surface Mount, Through Hole

Composition: Wirewound

Current Rating: 200 mA

DC Resistance (DCR): 6 Ω

Inductance: 820 µH

Max DC Current: 200 mA

Self Resonant Frequency: 1.4 MHz

Test Frequency: 796 kHz

Tolerance: 5 %

Dimensions: Diameter 8 mm, Height 11.2 mm, Height - Seated (Max) 11.2014 mm

Lead Diameter: 700 µm, Lead Length 5 mm, Lead Pitch   5 mm

Learn More

Inductor, ferrite. Inductance: 100uH. Tolerance: 10%. Package: SMD. T/R. Package of 4. Learn More

Inductor, choke. Inductance: 100uH 330mA. Tolerance: 5%. Package: axial leads. Dimensions: 7.8mm D x 22.7mm long. Learn More

Inductor, choke. 100uH 2Amp 0.216 Ohm. Tolerance: 20%. High inductance, high current hash filter choke. Ferrite core. Package: axial leads. Dimensions: 0.38" (9.65mm). RoHS compliant. More info: http://www.bourns.com/data/global/pdfs/5200_series.pdf Learn More

Inductor, choke. Inductance: 100uH 139mA 7.68 Ohm. Q=25 @ 2.5MHz. Varnished RF. Core material: iron. High Q high self-resonant frequency. Dimensions: 0.16" D x 0.25" wide. Many many turns of very fine magnet wire. Moisture resistant. More info: http://www.bourns.com/pdfs/70f_series.pdf Learn More

Inductor, RF. Inductance: 100uH. Maximum Current: 370ma. Tolerance: 5%. Package: axial leads. High frequency. Package of 10. Learn More

EPCOS - B78108-S1104-J / B78108S1104J000 - Inductor,

Inductor, RF chokes. Inductance: 100uH. Maximum current: 370mA. Tolerance: 5%. Package: axial leads.

Package of 50. 

Learn More

VISHAY DALE - IHD1-100UH Inductor, coil.

Inductance: 100uH.

Power: 1.1Amp.

Tolerance: 15%.

Package: Axial Leads.

Dimensions: 0.270" D x 0.70" long.

More info: http://www.vishay.com/docs/34016/ihd.pdf

Learn More

Inductor, choke. 100uH 2.5 Ohm. DC Resistance: 245mA @ 2.5MHz. Tolerance: 10%. Package: axial. Dimensions: 0.281" (7.1mm) D x 0.910" (23.1mm) long. Note: Military type LT10K189. Learn More