Inductors & Coils

TOKO AMERICA - 187LY-101J INDUCTOR

100 uH

Q Minimum 80

Test Freq. 796

DC Resistance 2.0 Ohm

Rated  DC Current Max. 200 mA

Self Resonant Freq. 5.3 MHz

Learn More

100uH 10% New SMD inductors for signal line (wound) T/Rhttp://www.tdk.co.jp/tefe02/e511_nl4532.pdf Learn More

STAVER - 479-65-35 W/L Aluminum can.

0.54" 13.8mm Square x 1.02" = 25.9mm Tall excluding two mounting pins.

Hole in top measures 0.223" = 5.6mm

New for any Adjustable (or not) RF Transformer or Adjustable coil with ferrite . . .

Lot of 20

Learn More

Inductor. EMI suppression ferrite test & design kit. Note: Possibly a complete full kit.

Learn More

STANDEX 1070 RF COIL pcb mt MARKED 24D80079J10 package of 6 Learn More

RENCO - RL1256-3-27 - Power Line Inductor, Choke.

Ratings: 18uH 0.010 Ohm 13.5Amp.

High saturation flux density material is ideal for use in switching regulated power supply applications.

Ideal wherever high current choke values in a small physical size are needed

DC Saturated Amps: 29Amp.

Operating temperature range: -40°C to +130°C

Dimensions: Diameter 1.10" x Height 0.85" (27.94mm x 21.59mm)

Typical applications include: power amplifiers, power supplies, SCR and TRIAC controls, speaker crossover networks and filters.

Learn More

NEW CUSTOM CHOKE REV.01 Learn More

NEW SMD IND TAPED OFF REEL Learn More

POLARA ENG - 76-100-088 - Inductor, coil.

3 Turns of 20AWG.

Package: radial leads, thru-hole.

Dimensions: 0.26" OD x 0.19" ID x 0.5" high.

Note: Label marked 2.5T.1875D2OGA.

Package of 100.

Learn More

PHILMORE - L-72 - MIDGET BROADCAST BAND UNIVERSAL OSCILLATOR

ADJUSTABLE COIL

RADIAL 5-LEADS RADIAL COIL/INDUCTOR

NEW

Learn More

FERRITE CORE MATCHED SETS GAPPED POT Learn More

NEW 8-PIN PCB MT COILS Learn More

Inductor, core. Size: 1.5" OD, 0.77" high with 6 solder posts on top. Learn More

Many turns of tiny magnet wire Inductor New with 2 radial leadsOverall 15.2mm dia x 6.8mm thick. Learn More

MICROMETALS - T130-0 Inductors, RF toroids.

Iron Powder Cores.

AL= 1.5 (nH/N2) +/- 10%

Material: Phenolic

OD = 1.30 / 33.0 mm +/- 0.02 in

ID = 0.780 in / 19.8 mm +/- 0.02 in Ht = 0.437 in / 11.1 mm +/- 0.025 in AL= 1.5 +/-5%

50 MHz - 350 MHz 

Genuine MicroMetals product

Recommended uses: Line filters, Power conversion

Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

Learn More

MICROMETALS - T106-0 Inductors, RF toroids.

AL=1.9 +/- 5 %

RF Phenolic Toroid

Dimensions: 1.06" OD x 0.437" high, with 0.57" ID and 0.260" thick walls.

Genuine MicroMetals product

Recommended uses: Line filters, Power conversion

Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

Learn More

Inductor, core. Dimensions: 1.480" (37.6mm) D x 0.507" (12.0mm) high, with an ID of 0.729" (18.5mm). Color: all Gray. Learn More

Inductors, toroid core. Military. Dimensions: OD - oval 2.59" long x 1.548" deep x 0.525" high. ID: rectangular 1.525" long x 0.482" deep x 0.525" high. Actually each is 2 piece/match. Learn More

110mm dia NORATEL Toroidal Transformer RTO-0295-000566 295VA on board 173x110x101mm high. New. Learn More

Inductor, coil. Toroid. Value: 30uH. DCR Ohm: 0.019. Mount: PCB, vertical. Case: radial leads. Dimensions; 0.810" D x 0.349" wide. New. More info: http://www.hurricaneelectronics.com/filterInductor.php Learn More

21-ohms DCR Enclosed in weatherproof plastic housing 1.6"W x 2.7"L x 1"thick with 2 holes on 2.1" mounting centers. Open-air core Inductor with 8-foot two conductor (red & green) sheathed wires, suitable for protected sensors or antenna of various & sundry types. Learn More

Inductor, coil form. Coil Former, 14 Pin. Material: polyamide PA6.6, glass reinforced, flame retardant. Pin material: Copper-zinc alloy Cu-Zn, tin alloy SnPb plated. One section. Minimum winding arear: 278mm. Nominal winding area: 33mm. Average length of turn: 119mm. 37.35mm long max x 45mm wide x 51.6mm tall including pc leads. Operating temperature: 105 Deg C. Learn More

FAIR-RITE - 0199000011 - Bead, Balun & Broadbank Kit.

This kit is the latest version of the first engineering kit introduced in 1978. It has an assortment of 34 parts, consisting of small shield beads, beads on leads and multi-aperture cores. To obtain optimum performance over a broad frequency spectrum, samples are supplied in several Fair-Rite materials.

Inductors, ferrite. Bead, Balun & Broadbank Kit.

Smaller cores for use on component leads or PCBs

Applications: The Bead, Balun and Broadband Kit II, part number 0199000011, contains a variety of components suited for broadband transformer design evaluations.

New Old Stock

Learn More

FAIR-RITE - 0199000010 -  Inductors, Ferrite, EMI Suppressor Kit.

Twenty-four wired beads in three basic design geometries are included in this evaluation kit. These beads are supplied in three suppressor materials; 73, 43 and 61.

Expanded Bead-On-Lead Kit.

Beads on wire lead for PCB insertion.

Nearly Complete.

Applicatiopns: For prototype evaluation.

Learn More