Fans

EBM Papst Fan, Axial. 48VDC (36-56V), 5.9 watt 3100U/min (3100RPM). 110 CFM, 54 dBA, 49 PSIL dB, With speed sensor tach-out (3rd blue wire). Housing Material: Aluminum,  5 metal blades, 4" leads. Mount centers: 5-7/8". Dimensions: 4-11/16" x 1.5" deep. (119mm x 38mm) Weight  1.15Lbs. (.52kG) Hall Effect Leads. Used/Removed from equipment. UL, CSA, & VDE Approved. Made in Germany. 

Fan, axial. 24VDC 0.10A. (12-30VDC 11-29CFM) 2.5 Watt, 11-29CFM. Fan : 2 Wire 62.2mm square x 26.0mm deep. 7 Plastic blade. Mounted on removable plastic frame (overall 4.674" long), with four holes underneath, 70.2mm (2.767") centers. Complete with finger guard. Weight: 5 oz. Note: Brushless electronic motor, polarity protected. There is a four pin connector on the fan (AMP 1-480702-0 with the red positive wire on position 1 and the blue negative wire on position 2 and an interlock jumper between positions 3 and 4). A mating connector is AMP 1-480702-1 with 350690-1 pin contacts. EBM Papst. Made in Germany.

EBM Papst - S2E300-BP02-34 - Axial Fan with Guard Grill.

Status: Discontinued

S2E300 Series = Axial Fan w/Guard, 2 Pole Single Phase, Thermal Managed Fan

230VAC 50/60Hz 1.55A

Speed: 3,000RPM (230/350W 1.10/1.55A 2700/3000-RPM).

Single Phase Motor requiring Motor Run Capacitor (8uF 400VAC capacitor- Purchased Separately).

Package: 14.75" Diameter, Open Frame

Bearing Type: Ball Bearing

5 Metal Sickled Blades and 13" Fingerguard.

Overall Fan Blade Diameter 300mm (11.8"). 

Environment: IP44

Weight: 9 lbs.

EBM/Papst. (Estimated 11 lbs packed).

Alternates: Allied Stock 71006289, Mouser 5912-S2E300-BP02-34, Digi-Key S2E300-BP02-34-ND

Rohs Compliant

Made in Germany

This model has been replaced with a less expensive China replacement that inferior to German quality.

Comair Rotron Sprite - Model SU2A1 - 028267 - Fan, Axial, 115VAC 50/60Hz, 0.19/0.15Amp.

Square compact axial fans have a square-shaped housing that can span a round cutout or fit into a square cutout for cooling equipment within an enclosure. These equipment-cooling fans require minimal space for installation and are typically installed where there's full access for mounting them against the interior of an enclosure. They have mounting holes at each corner for securing them to a wall or panel.

Status: Discontinued

Air Flow: 34 CFM

Static Pressure: 0.149 in H2O (37.1 Pa)

Mount: 4 Hole on 2-13/16" centers and (2) 12" wire leads.

Housing Material: Cast Aluminum.

Fan Blades: 7 Polybutylene Terephthalate.

Dimensions: 3-3/16" square x 1-1/2" deep.

Bearing Type: Sleeve Ball Bearings.

Motor Design: Shaded Pole

Motor Insulation: Class A

Noise: Quiet 40.3dBA

Speed: 3250 RPM

Dimensions 3.25" X 3.25" X 1.75 (80mm X 42mm).

Mounting Position: 

Color: Black

Weight: 1.15 lbs

Design Life: 62,000 Hours Continuous at 70 C

Thermal Protection: Impedance 

Additional Information: http://www.comairrotron.com/sites/default/files/files/COMAIR%20CATALOG.pdf

RoHS Complaint, UL Recognized 

Alternates: SU2B1, 028267, CR091, CR091SU2A1, Dayton 3LE75

New Old Stock - Proudly Made in USA

Protechnic Magic - MGT8024HB-O25 - IP68 Waterproof Fan

DC Brushless Fan, Axial with Lock Rotor Protection.

28VDC 0.16 Amp. 3 Wire

Dual Ball Bearing

3000 RPM +/- 10%

Airflow: 41.34 CFM

Noise: 33.2dB (A), Max. 36.2 dB(A)

Life Expectancy: 70,000 hrs at continuous 40C 

Mount: 4 hole with 4" centers and 18" wire leads of which 8" is Watertight.

Housing material: Plastic with 7 plastic blades.

Dimensions: 80X80X25mm

Ingress Protection Rating: IP68 

Operating Temp. -10 to 70C, Storage Temp. -40 to 70C

TOYO - TFDD8024RXA - Fan, Axial.

Supply Voltage: 24VDC

Supply Current:0.145 Amp.

DC Brushless, Ball Bearing.

Mount: 4 hole with 4" centers and (2) 10' wire leads.

Housing material: plastic with 7 plastic blades.

Dimensions: 3.17" Square x 0.91" (23.1mm) deep. (80 X 80 X 25 mm)

Note: Ball bearing.

Made in Japan

TOYO - TF92345AHW - Fan, Axial.

115/230VAC 50/60Hz 9/8 watt.

Mount: 4 hole with 4-5/8" centers and (4) 12' wire leads.

Housing material: metal with 5 plastic blades.

Dimensions: 3-5/8" square x 1" deep.

Note: Ball bearing.

Note: Consider installing a small efficient and reliable thermostat in series with the fan to automate operation to reduce energy consumption and increase fan life. See SKUs 6867 & 6880 that have “Normally Open” contacts that will close at either 113 or 140F.

Comair Rotron - 028245 - MR283 115 VAC Tubeaxial Cooling Fan, Used Excellent Condition

172mm x 150mm x 51mm, (6.75" X 5.92" X 2.00")
Operating Voltage/Current: 115 50/60 HZ /270mA
Operating Temperature 14 - 158F (-10C to +70C)
Bearing Type - Ball Bearing Permanently Lubricated
Material -- Housing Die Cast Aluminum, Impeller Thermoplastic
Air Flow - 235 CFM
RPM - 3400 RPM
Noise Level 55.80 dBa
Thermally Protected
Power - 31 Watts
Weight 1.8 Lbs/0.84kG
Lifetime @ Temp. - 51000 Hrs @ 40C
Safety Standard EN60950
Termination - 2 wire
Approvals - CE, CUL, UL Certified, RoHs Compliant

Note: Slightly Used / Excellent Condition / LN

EBM Papst - W2G076-BD01-13 - Fan, Axial, Ball Bearing.

Voltage:  12VDC

Nominal Voltage Rating: 6 -16 VDC

Power: 4.0 watt

Air Flow: 67 m3/h

Speed: 4200 RPM

Sound Power Level: 5.8B

Sound Pressure Level: 43

Numer of Blades:5 Blade

Construction Material: Glass-fiber reinforced PBT/PA Plastic.

Temperature: -20 C to 75 C

Connections: Quick Connect

Dimensions: 3.15" square x 1.26" deep (80mm x 32mm).

Service Life: 62500 Hours

Protection: IP54 / IP68

Approvals: VDE, CSA, UL, CE

Used/Removed from equipment.

EBM Papst.