Fans

Fan, axial. 24VDC 0.10A. (12-30VDC 11-29CFM) 2.5 Watt, 11-29CFM. Fan : 2 Wire 62.2mm square x 26.0mm deep. 7 Plastic blade. Mounted on removable plastic frame (overall 4.674" long), with four holes underneath, 70.2mm (2.767") centers. Complete with finger guard. Weight: 5 oz. Note: Brushless electronic motor, polarity protected. There is a four pin connector on the fan (AMP 1-480702-0 with the red positive wire on position 1 and the blue negative wire on position 2 and an interlock jumper between positions 3 and 4). A mating connector is AMP 1-480702-1 with 350690-1 pin contacts. EBM Papst. Made in Germany.

Learn More

MATSUSHITA - Panaflo - FBH-09A24LB - Fan, Axial. 24VDC 0.10A, DC Brushless, New. Voltage: 24 VDC Current: 0.10 Amps (100 mA) Mount: 4.5" Mount Diagonal - 4 Hole. Blades: 7 Plastic Blades. Connection: 2 Wire Leads. Double marked 7BO5D4-B. Dimensions: 3.6" Square x 1" Height (92mm x 92mm x 25mm). Weight: 5 oz. Made in Japan New Old Stock Learn More

Fan, axial. Voltage: 12VDC. Current: 0.32Amp 3.8 Watt, RevA. 7 Blade. Dimensions: 120mm square x 25mm (4.7" sq x 1" deep). Note: Computer cooling fans. Some may have less than 1" leads. Used/Removed from equipment. Learn More

Globe - D47-B10B-04W49-00 Fan, axial.

Power: 12VDC 0.44amp, 3.6 Watt

Air flow: 88 CFM.

Ball bearing.

Material: Plastic.

Dimensions: 1" x 4.7" square (120mm x 120mm x 26mm), 7 blades.

Weight: 6 oz (218.291g)

Used/Removed from equipment.

 

Learn More

GLOBE - D47-B10A-04W2-000 Fan, Axial.

Power Input: 12VDC 0.20A. (Range: 6.0 - 13.8 VDC)

Termination/Connections: 2 Wire Leads.

Speed: 2200 RPM.

Air Flow: 80 CFM.

Lifetime Lubricated Ball Bearing.

Construction: Reinforced Polybutylene

UL-94V.

4 Mounting holes 4.13" spacing.

Dimeensions: 4.69" x 1". (120mm X 120mm X 25mm)

Opening: 4.2".

Weight: 7 oz.

Electronic locked rotor and polarity protected some leads may be short.

Made in Thailand

Life Expectancy: >75,000 Hours

Note: Used/Removed from Equipment - Sell New $26

Approvals: UL CSA VDE CE

Learn More

GLOBE - D24-B10A-04W3-000 Fan, Axial. 

Features:

• Solid State Brushless Motor Design Provides:
  - Improved Performance
  - High Efficiency
  - Auto Restart
  - Low Input Power
  - Lower Operating Voltages
• Precision Ball Bearing System Provides:
  - Longer Life
  - Higher Temperature Extremes
  - Lower Noise Over Time
  - Maximum Shock and Vibration Resistance
• Designed to Meet the Rigid Standards of UL, CSA, VDE, and CE
• Electronic Locked Rotor Protection
• 12VDC 0.13Amp, 3600 RPM, 17CFM, 1.44 Watt.
• Efficient extra low current draw.
• Low noise, ball bearing, 28dBA.
• Dimensions: 2.36" x 2.36"x 1" (60mm X 60mm x 25mm),
• Maximum Operating Temperature 70C
• Minimum Operating Temperature -10C
• Rotation CW
• 2.3 Oz.
• 5 blade. Material: Plastic. 2 Wire leads.
• RoHS Compliant

Used/RFE.

 

 

Learn More

COMAIR ROTRON - MC12B7X - 12VDC Muffin Fan 0.66Amp

Voltage Range: 6 VDC to 14 VDC

Power: 7.9Watt

Nominal Speed: 3700 RPM

Airflow: 102 CFM

PTC & Polarity Protected

Three (3) wire - The 3rd is a 5 Volt TTL Tachometer Output - Two Pulses per Revolution

Blades: 5-Blade Plastic

Dimensions: 4.72" Square X 1.26"  (120mm x 120mm X 30mm)

Mounting Holes  4.125" Square

Weight: 0.85 Pounds

Excellent Condition - Lightly Used - Removed from Equipment.

Alternate: 031414

Note: Newer Production Comair Rotron Fans are inferior and made in China.

 

Learn More

NIDEC-TORIN - TA225DC - A31390-10 Fan, Axial.

Input Power: 12VDC 0.08A. 2 Wire/Pin.

Speed: 2600 RPM.

Air Flow:12 CFM.

Construction: 9 plastic blades metal frame.

Mounting: 2 hole 2.78" spacing.

Dimensions: 2.37" x 2.71" x 0.8".

Opening: 2.25".

Ball Bearings.

Weight: 3.6 oz.

Terminals Out Top, Solder or Small Quick Connect

Model A31390-10.

Made in Japan

Learn More

NMB Minebea - 2410ML-04W-B20 Micro Boxer Axial Fan 

Auto restart/Polarity Protection

3600 RPM

12VDC 0.16A,

16.9 CFM,

Ball Bearing construction

7 plastic blades, 4 hole 2" spacing.

Dimensions: 2.36" x 1", 2 wire.

Operating Temperature -10C to +70C

Opening: 2.25".

Weight: 2.2 oz.

Low noise, 28 dB

Used/Removed from equipment, some may have short 1" leads. 

Made in Thailand

Learn More

COMAIR ROTRON - ST12G6X - 031504 - Fan, Axial, Sprint DC.

12VDC 0.12Amp 1.4 watt,

Airflow: 33 CFM.

Sprint DC.

Plastic 5 blades.

PTC & Polarity Protected

Mount: Panel 4 holes with 2.82" centers.

Dimensions: 80mm Square x 32mm wide.

Note: Alt P/N: 031504.

UL, CSA Listed 

Condition: LN Used/Removed from equipment.

Mixed length on lead wires. Some slightly dusty/dirty.

Weight 7 oz.

Learn More

12VDC Fan 0.35A brushless (RFE/Used) mixed manuf JMC/DA-TECH 0825-12HBT, etc 3.155" (80.1mm) x 3.155" (80.1mm) x 0.982" (24.9mm) deep with one finger guard attached and a 3-cond 4" wire Learn More

TRW GLOBE - 19A2689 Fan, Axial. Xerox 127P1668 

A Vaneaxial fan consisting of a disk-type wheel within a cylinder with a set of air guide vanes. It has a higher efficiency than any other type of axial-flow fans and more expensive to manufacture.

24VDC.

Vaneaxial.

Dimensions: Round 2.620" D x 2.577" deep.

Mounts in hole with instrument-style flange front, four holes 2.111" apart, 3" centers.

Four plastic blade.

Two wire, 5" long with a 2 position Molex connector.

Made in USA

Learn More

Protechnic Magic - MGT8024HB-O25 - IP68 Waterproof Fan

DC Brushless Fan, Axial with Lock Rotor Protection.

28VDC 0.16 Amp. 3 Wire

Dual Ball Bearing

3000 RPM +/- 10%

Airflow: 41.34 CFM

Noise: 33.2dB (A), Max. 36.2 dB(A)

Life Expectancy: 70,000 hrs at continuous 40C 

Mount: 4 hole with 4" centers and 18" wire leads of which 8" is Watertight.

Housing material: Plastic with 7 plastic blades.

Dimensions: 80X80X25mm

Ingress Protection Rating: IP68 

Operating Temp. -10 to 70C, Storage Temp. -40 to 70C

 

Learn More

TOYO - TFDD8024RXA - Fan, Axial.

Supply Voltage: 24VDC

Supply Current:0.145 Amp.

DC Brushless, Ball Bearing.

Mount: 4 hole with 4" centers and (2) 10' wire leads.

Housing material: plastic with 7 plastic blades.

Dimensions: 3.17" Square x 0.91" (23.1mm) deep. (80 X 80 X 25 mm)

Note: Ball bearing.

Made in Japan

Learn More

EBM Papst - W2G076-BD01-13 - Fan, Axial, Ball Bearing.

Voltage:  12VDC

Nominal Voltage Rating: 6 -16 VDC

Power: 4.0 watt

Air Flow: 67 m3/h

Speed: 4200 RPM

Sound Power Level: 5.8B

Sound Pressure Level: 43

Numer of Blades:5 Blade

Construction Material: Glass-fiber reinforced PBT/PA Plastic.

Temperature: -20 C to 75 C

Connections: Quick Connect

Dimensions: 3.15" square x 1.26" deep (80mm x 32mm).

Service Life: 62500 Hours

Protection: IP54 / IP68

Approvals: VDE, CSA, UL, CE

Used/Removed from equipment.

EBM Papst.

Learn More

EG&G-ROTRON - SD24B1 - Fan, Axial.

Rotron DC fans feature outstanding airflow performance in high pressure systems and all include a permanent split capacitor motor. An extended ball bearing life ensures fault-free use for a significant period of time and ensures Rotron DC fans provide a flexible and dependable cooling solution.

24VDC 0.12Amp, 35CFM. 2 wire 12".

Metal housing, 7 plastic blades.

Mount: 4 hole 4" centers.

Dimensions: 80 x 80 x 38mm (3-1/4" square x 1-5/8" deep).

Ball bearing. DC Brushless.

Air Flow: 59m³/h (35CFM)

Noise Level: 47.6dB

Fan Speed: 3500rpm

Bearing Type: Ball

Polarity protected. Sprite.

Approvals: UL, CSA, TUV.

New Old Stock

Made in USA

Learn More

DC CENTAUR - CNDC24K4-601 Fans, Axial.

24VDC 11 Watt.

Brushless, Ball Bearing, 5 Plastic blade.

Dimensions: 120 x 39mm.

Bearng Type: Ball Bearing

Housing: Aluminum Cast.

Used/removed from Equipment.  Old Stock

Dimensions: Width: 1 in, Height: 4.7 in, Length: 4.7 in (36mm X 120 mm X 120Mm)

[Note: These fans have three wires, the Red and White wires connect to +24VDC, the Black wire connects to the negative side of the 24VDC source.

Made in Japan

Retail for $75

Learn More

Fan, axial. 12VDC 0.17Amp. Plastic, 7 blade. Complete with (unattached) heatsink 2.909" long x 2.525" wide x 1.003" high. New. Note: Double marked A50441-002. New. Learn More

Intel / Nidec - F07R-12B4S1 - Fan, Axial A50933-003.

3 Pin CPU Cooling Fan

Voltage/Current: 12VDC 0.17Amp.

Socket Compatibility: Socket 370

Fan DIameter: 75mm

Ball Bearing

Material: Thermoplastic

Color: Black

Plastic, 7 blade.

Complete with (unattached) heatsink 2.909" long x 2.525" wide x 1.003" high.

New in Blister Pack. 

Note: Double marked A50933-003 and 03AC1.

Applications: Pentium 3 and others.

Learn More

Fan, axial. 12VDC 3.36 watt 13.42CFM 10300RPM 40dBA. With tach. Dimensions: 40 x 40 x 28mm. Note: Mini. Learn More