Connectors

CTI - 4447000 – Mini UHF Male for Female Coupler End to Coaxial Cable Connector Standard Mini UHF Male Connector SO-239, High Quality Component Connector A: Internal Threaded Mini UHF Male Connector fits over a Miniature Female Threaded Coupler Connector B: Gold Plated Solder Cup Terminal Material: Nickel Plated Brass, Gold Plated RF Pin Contact, Teflon Insulator Impedance: 50 Ohm up to 1 GHz Overall Dimensions: 1.0” Length x 0.495” Shoulder, 0.365” Flattened Barrel and Gold Solder Cup Mating Life: >1000 Cycles Inner Diameter Dimension is 7.3mm Diameter With a 1.25mm (0.05”) Diameter Center Pin Outside Diameter is 9.5mm Applications: Amateur / HAM Radio, CB / Citizens Band radio, Marine radio & VHF radio. Individually Packaged, (Bulk Packed) New Old Stock Made in USA Learn More

CTI - 4306000 – UHF RF Coaxial Connector N SO-239 Female Bulkhead Receptacle Rear Mount A female UHF connector (also called SO-259) is a threaded RF connector commonly used in RF applications. The threaded design makes a UHF connector a secure and reliable connection. UHF connectors come in male and female variations. UHF coaxial RF connectors were one of the first RF connector series to be developed. The 5/8"-24 thread coupling and clamp, crimp, twist-on, and solder terminations give the UHF the flexibility that has kept it one of the most popular coaxial connectors over the years. Connector, Coaxial. Type: BNC. Housing Gender: Receptacle. Contact Gender: Female. Circuit Count: 1. Frequency Range: 0-10GHz Impedance: 50 Ohm Temp. Range: -40～+85 ℃ Dielectric Withstand Voltage........ 1,000 Vrms (at Sea Level) Contact Resistance: ≤5mΩ Interface Type A: Solder Cup Terminal Mount Method: Bulkhead Connector Body Style: Straight Bulkhead Insulation Material: Teflon. Material: Nickel Plated Brass Connection: Solder Terminals. Mating Life: >1000 Times Note: UHF / SO239. Dimensions: 0.996” (25.3mm) Length x 0.748” (19.00mm) Diameter Applications: Among the many applications of this low cost, low frequency device are antenna connections for CB radios, public address systems, audio, video, mobile radio, and test equipment. Note: No additional attaching Hardware. Made in USA Learn More

BNC (F) female (threaded panel mount) with solder pin on right angle 90 Degree RG6 cable push in end. Learn More

TNC FEMALE Cable end - To RG-174 COAX CRIMP END - every piece, pins and ferrules Gold Plated Learn More

Connector, coaxial. Housing gender: plug. Contact gender: male N to RG174 (miniature end). Outside dimensions: Length: 2-1/2". Learn More

WAGO - 279-101 - Terminal Block.

Through and Ground (Earth) Conductor Terminal Blocks

1.5 mm2 to 16 mm2 / AWG 16 – 6

Series 279 bis 283

2 Position 28-16AWG, 800V.

(Only 600V USA).

Mount: Din Rail.

Dimensions: 4mm thick.

Note: Please see our SKU 139023 for terminals numbering cards.

Alternate: Newark 29K0598

Learn More

WAGO - 261-301 - 136-030 -  Connector, Terminal Block.

Circuit Count: Two Conductor.

Insulation voltage: 300V 500V.

Rated Inpulse Voltage: 6kV

Rated Current: 24 A

2-conductor terminal block

Without push-buttons

With fixing flange; 1-pole; for screw or similar

Mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²

CAGE CLAMP®; 2,50 mm²

Housing Material: Thermoplastic, Gray.

Mounting type: PCB single hole mount.

Outside dimensions: 1/4" wide.

Note: Series 261.

Wire size: 14-16AWG.

Snap together terminals.

Made in Germany

Learn More

WAGO - 0721-0440/0001-0000 - Standard Terminal Block.

721 Series

Contact Material: Steel.

No. of Positions:10.

Pitch Spacing: 5mm .

Wire Size (AWG):28-20.

THT Male Header 1.0 vx 1.0 mm

Solder Pin

100% Protected against mismating.

Color: Light Gray.

Alternate: Newark 79K2139, DIGI-Key 2946-721-440/001-ND 

Made in Germany

Learn More

CTI - 18-01F-N  - "F" Type Male Crimp-on Video Connector for RG6, 2-part with Ferrule

F type crimp connectors provide a secure connection for coax terminations. Requires a crimp tool for terminations.

Material Nickel Plated Brass

For RG6 Coaxial Cable

Package of twenty (20) 

Large discount when purchased by bag of 200.

Alternate: Arista Model 58-5554

Learn More

WAGO - 261-331 - Connector, DIN-rail Terminal Block CAGE CLAMP 4-conductor.

The 261-331 from Wago is a 4 conductor terminal block with fixing flange. This terminal block is used for screw or similar mounting types and suitable for wire size ranging from 28AWG to 14AWG.

Standard (European) Chassis Mount, with fixing flange mount. Product group 9 (Standard Chassis )

Side Entry: 28 - 14 AWG.

Connector Type Terminal Block

Current Rating: 24 A

Number of Contacts: 4

Voltage Rating: 500 V

Dimensions: Height 18 mm, Lead Pitch   10 mm, Length  28 mm, Width   10 mm

Wire/Cable Gauge: 28 AWG

Flammability Rating: UL94 V-0

Strip Length: 8-9mm / 0.33".

Current Intensity: 24A EN. 10 x 18 x 28mm.

Screwless Clamping System.

Made in Switzerland

Alternate: Newark 29K0197, GTIN UPC 

Learn More

WAGO - 279-317 Terminal Plate, End and Intermediate Plate only.

Size: Height 27 mm, Width 2 mm (0.079")

flamability Rating: UL94V-0

Color: Orange.

Learn More

WAGO - 249-116 - Connector, Terminal Strip.

The 249-116 from Wago is a 6mm wide grey colour screwless end stop for use with terminal blocks.

Screwless End Stop.

Size: 6 mm / 0.236" wide.

Dimension is 6mm x 28.2mm x 45mm (W x H x D)

Mount: Din Rail.

Color: Grey.

Alternate: Newark 28K2138, Digi-Key 2946-249-116-ND

Learn More

WAGO - 209-703 - Connector, Terminal Strip.

WSB Quick Marking System Perpendicular.

Size: 4 mm width, (11-20)

Marking method: Thermal transfer

Marking: 11 … 20

Marking (number): 10

Marking Direction: Vertical Marking

Marking Color: Black

Marking Type: Numbers

Marking representation Consecutive numbers per strip

Delivery form: Marker card

Delivery form configuration: 10 strips with 10 markers per card

10 strips of 10 markers per strip (100) per card consecutive numbers each strip.

Alternate: 60K7273, 2946-209-703 ND

Learn More

WAGO - 209-702 - Connector, terminal Strip.WSB Quick Marking System Perpendicular.

Marking method: Thermal transfer

Marking: 1 … 10

Marking (number): 10

Marking direction: Vertical marking

Marking color: black

Marking type: Numbers

Marking representation Consecutive numbers per strip

Delivery form: Marker card

Delivery form configuration: 10 strips with 10 markers per card

Size: 4 mm width, (1-10)

10 strips of 10 markers per strip (100) per card consecutive numbers each strip.

Alternate: Newark 78H0731, Digi-Key 2946-209-702-ND

Learn More

WAGO - 208-002/676-000 Connector, Rail Mount Terminal Block.

14 x 2 Conductor, 16-28AWG, 10Amp.

Mount: Through Hole.

Mounted on 3'' long DIN rail with End Blocks.

Dimensions: 1.7'' x 1.5'' high.

End Caps o din rail.

Made in Germany

Learn More

Wago - 236-211 - 809-236/078 - Connector, Terminal Block.

PCB TERMINAL BLOCK, 2.5 MM, PIN SPACING 5/5.08 MM

PCB Terminal Strips with CAGE CLAMP^® connection, screwdriver actuation parallel or perpendicular to conductor entry

Operating Tools for factory wiring

Circuit Count: 10 Position.

Mounting Type: PCB.

Voltage: 300 V

Current: 10 A

Solder Pin Length: 3.6 mm

Solder Pin Length: 5.5 mm

Connection: Right Angle Wire Entry.

Outside Dimensions: 52.3mm long x 14.3mm wide x 13.2mm above board.

Note: These terminal strips are actually 10 pieces 1P all snaped together to make a 10 Position T-strip, each with end pieces. 10 236-101 Snapped together make one 236-211

Alternates: Newark 28K9514, Digi-Key 2946-236-110-ND

 

Learn More