Connectors

Everett Charles / Augat Pylon Connectors, P2662AG-1R1S - Electrical Pogo Contacts.

Test Spring Probes/PCB

Pogo Spring-Loaded Radius Contacts Gold Tipped.

Body Material" Gold

Plunger Material: Heat Treated BeCu, Gold Plated over hard Nickel

Barrel Material: Phosper Bronze, gold Plated

Ball Material: Stainless Steel

Mount: PCB

Spring Force: 1.0 - 2.2-Oz.

Stroke 0.10"-0.07".

Length: 18.03 mm

Test Center: 0.050".

Current Rating: 3 Amps

Operating Temperature: -55 C to 85 C

Resistance: <30milliohm.

Applications: Pogo Contacts for Board Test, Battery Interconnects, Medical Devices and other Momentary Electrical Contacts.

Alternates: Newark 50F5567, Farnell 1422340

Package of 10

Learn More

TE connectivity - Augat - Connectors, IC sockets.

16 Dip solder tail, low profile.

Contacts Material: Nickel & Silver, Contact surfacr treatmentis Gold.

Package of 10.

Learn More

ARC - CDC-25S Connector, Socket.

Type: Sub D,  DB25

Housing Gender: Receptacle.

Contact Gender: 25 Position.

Mounting Type: Panel Mount.

Shell Material: Steel

Note: Housing only - no pins.

Alternate: 1658671-1, C&P25M, 5205207-1, 70041232

Learn More

AUGAT - 716AG12D Connectors, IC Socket.

Machined 16 pin break-a-way leads.

Chip Carrier / Aluminum Carrier.

Maybe replaced with exact replacement by Seaget 10506-016.

Package of 10.

Learn More

ARC - HDD-15A Connector, hoods.

For DB15. DA15A.

Material: plastic.

Color: chrome.

Complete with hardware.

Learn More

TE Connectivity AUGAT - 828-AG11D-LF - IC Sockets. 28 Contact Dip.

Using IC sockets is advisable on boards with point to point wiring because replacing a defective IC is time consuming and can possibly damage your prototype board. The use of an IC socket is inexpensive compared to the time and effort required to replace an IC chip. IC sockets also reduce the possibility of damaging the board when swapping out IC's.
Number of Pins: 28 (14 x 2)
Type: Open Frame
Row Spacing: 15.24mm (0.60")
Pitch: 2.54mm (0.10")
Mounting: Through Hole

Dimensions:
Length: 35.5 (1.4")
Width: 17.7mm (0.7")
Height (including pins): 7.33mm (0.29")

Manufactured by: Augat (TE Connectivity)
Part Number: 1828-AR111D

 

 

 

Learn More

AUGAT - 514-AG37F - IC, Sockets. 14-Dip Machined Tooled Wire Wrap Contact Material: Beryllium Copper, Gold Plated Dimensions: 0.400” X 0.750” Row Spacing: 0.30” Body Style: 54B PCB Standoff Terminals No Shelf Life NSN 5935-01-145-0069 Alternates: NTE436W14, ValuePro 6100-14W-R Learn More

TE Connectivity AUGAT - 724AG14D Connectors, IC sockets. 24 Dip.

Machined brass pins, gold over nickel contacts.

Note: Maybe replaced with equivalent socket manufactured by Precicontact Inc P/N: USO-624-T.180.

Package of 15, one full manufactures tube.

Learn More

AUGAT - 1-1P16-2 - 16-Pin Dip Socket KIT, Gold Pins, 16MSGG.3 

An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or printed wiring board and is not designed to be mounted on a bulkhead, chasses, panel, printed wiring board, or the like. excludes jack, telephone; jack, tip; plug, telephone; plug tip; insert, electrical connector; connector body (as modified); and socket, plug-in, electronic components. see also lead assembly, electrical; wiring harness (as modified); and cable assembly (as modified). for items without inserts, see shell, electrical connector.

Integrated Circuit Socket

16-Pin Dip Socket with 16 Gold pins and Red top with two screws.

Kit individually packaged in clear plastic tube.

NSN 5935-01-354-6637

Learn More

AUGAT - 814AG10F2 Connector, IC Socket.

Dip 14 pin Wire Wrap

Operating Temperature: -55 C to 125 C

Pitch: 2.54

Max. Voltage: 150VDC/100VAC

Max. Current: 3A

Gold Leads and Sockets, Machined (Premium Series).

Level 2.

Alternates: 124-93-314-41-001000, 514-AG10F, ICA-314-WGG

 

Learn More

Connector, D-Sub. DB15 female crimp and insert shell, no pins. Package of 10. Learn More

Lot of 10 - ARC - AA-CDC-15P - Standard Density D-Sub Connector, Crimp Housing, Male 15 Circuits. Connector, D-Sub. The DB15 connector is an analog socket, with 15 pins, from the D-Subminiatures (D-Sub) connector family. The prefix “D” represents the D-shape of the connector shell. The DB15 connector is mainly used in serial and parallel ports, allowing asynchronous data transmission according to the RS-232 standard (RS-232C). DB15 male crimp and insert shell, No Pins. Color: Black / Silver Dielectric Material: Nylon Housing Material: Steel Mount: Free Hanging Number of Pins: 15 Position Shell Finish: Tin Shell Material: Steel Temperature: -55° to +115°C Wire Size: 18, 20, 22, 24, 26, 28 AWG Orientation: Straight Water Proof / Dust Proof: IP20 Panel Mount: Rear Panel Mount: Method Flange Pitch - Mating Interface: 2.84mm Pitch - Termination Interface: 2.84mm New Old Stock Alternates: 205206-3, 1727040001, MHDBC15SP MH, VS-15-ST-DSUB-CD-MG-D-SUB Learn More

ARC - HDD-25-A - Connector, hoods.

For DB25 with strain relief and screw set included.

Connector, hoods.

Material: Metalized Plastic.

Color: Chrome. Complete with hardware/strain relief.

Large discount when purchased in bag of 50.

Learn More

K - 618-CG1 - 20-600-11 - Connector, DIP Adapter Header. 20 Pin Plug Adapter Assembly, Gold Plated Pins and Carriers.

20 Pin Component Carrier

Used for Interposing Discrete Components
Terminals are same Dimensions as IC Board Patterns
Thermoplastic Polyester Insulators

20-Pin Component Header.

U-Shaped (Forked) Pin Termination for easy Compmonent placing.

Lead Spacing: 0.100" (2.54mm)

Row Spacing: 0.300" (7.62mm)

Solder Straight Solder Through Hole

Pin Style: Fork

All Gold Bonded Contacts.

Color: Black

Components Molded Marking "K" 

Alternates: 20-600-11, 

Learn More

AUGAT - 820-AG11D - 6-1437537-6 - Connector, IC Socket. 20 Dip.

Status: Discontinued

Connector, IC Socket.

Circuit Count: 20 Pin.

Pitch: 2.54mm

Row Spacing: 7.62mm

Mounting Type: PCB.

Pin Spacing: 2.6mm (0.1"). Row pitch: 7.62mm.

\Temperature: -55 C to 125 C

Contact Plating: Gold over nickel.

Note: Machined Pins, Gold Contacts.

Narrow.

 

Learn More

AUGAT TE Connectivity - 516-AG11D - 2-1571550-4 - 4-114 - Connector, IC Socket. 16 Dip.

Status: Discontinued

16 Position, Machined Pins, Gold Machined Contacts.

Closed Frame, Dual Leaf Contacts

Contact Material: Berylium Copper, Gold over Nickel Plating

2.54mm Centerline, Thin.

New Old Stock

Package of 10.

Learn More

AMP - Tyco AUGAT - 4-259 Connector, Header.

Features:
Precision Machined Pins
Used for Interposing Discrete Components
Terminals are same Dimensions as IC Board Patterns
Thermoplastic Polyester Insulators

14-Pin Component Header.

Lead Spacing: 0.100" (2.54mm)

All Gold Bonded Contacts.

Alternate: 614-DG5, 2-1437515-0 .

Learn More

DB25 (F) SOLDER CUP Learn More

Connector, hoods. For 36 position/pin Centronic connectors. Material: plastic. Color: gray. Complete with hardware/strain relief. Learn More

Connector, D-Sub. DB9 male crimp and insert shell, no pins. Package of 8. Learn More

ARC - 9-022 - 25 PIN Grey Plastic Hood for DB25 Connector.

Learn More

ARC - 8-720 - Connector, D-Sub.

Build or repair your own RS232 serial cables with DB9 male type connectors. Simply wire up the cable ends into the solder cups on the reverse side of the D-sub connector. Also available in crimping type. Use in conjunction with our DB9 Hoods for a quality, durable connection.

Contact Gender: Male.

Circuit Count: DB15 (DA-15P).

Mounting Type: Panel.

Connection: Solder Cup.

Shell: Steel, Nickel Plated

Alternate: 171-015-103L011

Applications: This is for a two-row pin layout found in commercial equipment and older game controllers.

Learn More

TWINAX FEMALE "T" ALL FEMALE Learn More

TWINAX- "T " M-F-F Learn More